by Keyword: stereolithography
Torras, N, Zabalo, J, Abril, E, Carré, A, García-Díaz, M, Martínez, E, (2023). A bioprinted 3D gut model with crypt-villus structures to mimic the intestinal epithelial-stromal microenvironment Biomaterials Advances 153, 213534 
The intestine is a complex tissue with a characteristic three-dimensional (3D) crypt-villus architecture, which plays a key role in the intestinal function. This function is also regulated by the intestinal stroma that actively supports the intestinal epithelium, maintaining the homeostasis of the tissue. Efforts to account for the 3D complex structure of the intestinal tissue have been focused mainly in mimicking the epithelial barrier, while solutions to include the stromal compartment are scarce and unpractical to be used in routine experiments. Here we demonstrate that by employing an optimized bioink formulation and the suitable printing parameters it is possible to produce fibroblast-laden crypt-villus structures by means of digital light projection stereolithography (DLP-SLA). This process provides excellent cell viability, accurate spatial resolution, and high printing throughput, resulting in a robust biofabrication approach that yields functional gut mucosa tissues compatible with conventional testing techniques.Copyright © 2023 Elsevier B.V. All rights reserved.
JTD Keywords: 3d microstructure, barrier, cells, epithelial-stromal interactions, gelma-pegda soft hydrogels, growth, hydrogel, intestinal mucosa model, methacrylamide, microfabrication, proliferation, scaffold, stereolithography, 3d bioprinting, 3d microstructure, Epithelial-stromal interactions, Fibroblasts, Gelma-pegda soft hydrogels, Intestinal mucosa model
Subirada, Francesc, Paoli, Roberto, Sierra-Agudelo, Jessica, Lagunas, Anna, Rodriguez-Trujillo, Romen, Samitier, Josep, (2022). Development of a Custom-Made 3D Printing Protocol with Commercial Resins for Manufacturing Microfluidic Devices Polymers 14, 2955
The combination of microfluidics and photo-polymerization techniques such as stereolithography (SLA) has emerged as a new field which has a lot of potential to influence in such important areas as biological analysis, and chemical detection among others. However, the integration between them is still at an early stage of development. In this article, after analyzing the resolution of a custom SLA 3D printer with commercial resins, microfluidic devices were manufactured using three different approaches. First, printing a mold with the objective of creating a Polydimethylsiloxane (PDMS) replica with the microfluidic channels; secondly, open channels have been printed and then assembled with a flat cover of the same resin material. Finally, a closed microfluidic device has also been produced in a single process of printing. Important results for 3D printing with commercial resins have been achieved by only printing one layer on top of the channel. All microfluidic devices have been tested successfully for pressure-driven fluid flow.
JTD Keywords: 3d printing, additive manufacturing, microfluidics, photo-curable polymers, 3d printing, Additive manufacturing, Microfluidics, Photo-curable polymers, Stereolithography
Breideband, L, Pampaloni, F, Martensson, G, Eklund, R, Wurst, H, Angres, B, Torras, N, Martinez, E, Shalom-Feuerstein, R, (2022). BIOPRINTING BY LIGHT SHEET LITHOGRAPHY: ENGINEERING COMPLEX TISSUES WITH HIGH RESOLUTION AT HIGH SPEED (Abstract 1581) Tissue Engineering Part a 28, S443-S443
Three-dimensional bioprinting (3D bioprinting) has been at theforefront of tissue engineering research in the past years, with evermore efficient systems reaching the market(1). While existing 3Dbioprinting techniques are numerous and varied, they are limited bylong printing times when used at high resolution(2). The techniquedescribed in this work aims at enabling fast and accurate productionof monolayered skin constructs.To achieve shorter production times, a digital scanned light sheetis used to produce patterns of polymerized hydrogel, which enablesthe printing of a full three-dimensional plane in a matter of a fewhundred milliseconds. The high resolution resides in the properties ofthe light sheet itself – the width of the light sheet represents the z-axial resolution of the system (as low as 10mm) and the x-axialresolution is determined by the intensity profile of the gaussian beam(around 50mm). In order to fully exploit this system, the hydrogelused to encapsulate the cells must therefore be tailor-made for pho-toactivated cross-linking.As a proof of concept, a light sheet microscope is used as a po-lymerization source for novel photosensitive hydrogels. The up-coming hardware, software, chemical and biological improvementsneeded to reach the full potential of this system are expected toeventually be sufficient to print a complete skin construct, whichcould be used in the drug development industry, or as a graft forregenerative medicine therapy. Additionally, the constructs can beused to reduce and even replace animal testing for drug or cosmetictesting.
JTD Keywords: 3d bioprinting, Light sheet microscopy, Stereolithography
