Publications

Transcutaneous devices such as dental implants frequently fail due to infections at their interfaces with epithelial tissues. These infections are facilitated by the lack of integration between the devices and the surrounding soft tissues. This study aims to improve epithelial integration through surface modification of a transcutaneous implant material (polyetheretherketone (PEEK)). The modification involved covalent bonding of collagen via two distinct methods: (1) nonselective binding through any primary amines present on collagen using carbodiimide-based coupling and (2) site-specific binding to the free amine on the N-terminus of collagen molecules. The second approach preserves active sites responsible for interacting with integrins, crucial for epithelial cell adhesion, located near the C terminus. Both conjugation methods resulted in similar amounts of immobilized collagen; yet, surfaces with 2-PCA-based collagen conjugation exhibited 4 times more free amines. This indicates that fewer amines were used for conjugation in these samples, confirming that 2-PCA selectively binds collagen only through the N-terminus amines. Collagen-conjugated surfaces significantly enhanced HaCaT epithelial cell viability and adhesion compared to unmodified PEEK. Furthermore, 2-PCA-based conjugation resulted in a 2-fold increase in beta 4 subunit gene expression of integrin alpha 6 beta 4 (a key epithelial cell adhesion marker), higher integrin beta 4 immunofluorescence (IF) intensity, and over a 30% improvement in cell retention following mechanical detachment, compared to nonselective conjugation. These findings suggest that selective collagen conjugation on PEEK surfaces increases the accessibility of collagen domains responsible for binding with integrin receptors, which in turn improves epithelial cell attachment, offering a promising strategy for reducing infections and enhancing the longevity of transcutaneous devices.

JTD Keywords: Cell-adhesion, Conjugation, Domains, Fibroblasts, Fibronectin, Integrin, Matrix, Protein, Selective protein conjugation, Soft tissue integration, Strategies, Titanium surfaces, Transcutaneous implants

Objectives: Despite the high survival rates of dental implants, peri-implantitis is a prevalent complication. Periimplantitis is related to biofilm that adheres to the surface of implants and causes peri-implant chronic inflammation and bone destruction. Different surface treatments have been proposed to prevent biofilm formation. The objective of this systematic review was analyzing different types of antimicrobial coatings and identifying the most effective one(s) to control bacterial colonization over extended periods of analysis. Data, sources and study selection: We performed a bibliographic search in Pubmed and Cochrane base of articles published after 2010 to answer, according to the PICO system, the following question: What is the most effective antibacterial surface coating for dental implants? Only papers including a minimum follow-up bacteria growth analysis for at least 48 h were selected. After selection, the studies were classified using the PRISMA system. A total of 40 studies were included. Conclusions: Three main categories of coatings were identified: Antibacterial peptides, synthetic antimicrobial molecules (polymers, antibiotics, ...), and metallic nanoparticles (silver). Antibacterial peptide coatings to modify dental implant surfaces have been the most studied and effective surface modification to control bacterial colonization over extended periods of incubation as they are highly potent, durable and biocompatible. However, more in vitro and pre-clinical studies are needed to assess their true potential as a technology for preventing periimplant infections.

JTD Keywords: Anti-infective coating, Antibiotics, Antimicrobial peptide coatings, Antimicrobial peptides, Antimicrobial polymers, Bacterial colonizatio, Biofilm formatio, Cationic peptides, Chimeric peptides, Dental implants, Human gingival fibroblasts, Metal nanoparticles, Osseointegrated oral implants, Peri-implantitis, Silver nanoparticles, Surface treatment, Sustained-release device, Titanium surfaces

Cell-material interactions are regulated by mimicking bone extracellular matrix on the surface of biomaterials. In this regard, reproducing the extracellular conditions that promote integrin and growth factor (GF) signaling is a major goal to trigger bone regeneration. Thus, the use of synthetic osteogenic domains derived from bone morphogenetic protein 2 (BMP-2) is gaining increasing attention, as this strategy is devoid of the clinical risks associated with this molecule. In this work, the wrist and knuckle epitopes of BMP-2 are screened to identify peptides with potential osteogenic properties. The most active sequences (the DWIVA motif and its cyclic version) are combined with the cell adhesive RGD peptide (linear and cyclic variants), to produce tailor-made biomimetic peptides presenting the bioactive cues in a chemically and geometrically defined manner. Such multifunctional peptides are next used to functionalize titanium surfaces. Biological characterization with mesenchymal stem cells demonstrates the ability of the biointerfaces to synergistically enhance cell adhesion and osteogenic differentiation. Furthermore, in vivo studies in rat calvarial defects prove the capacity of the biomimetic coatings to improve new bone formation and reduce fibrous tissue thickness. These results highlight the potential of mimicking integrin-GF signaling with synthetic peptides, without the need for exogenous GFs.© 2022 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.

JTD Keywords: adhesion formation, bmp-2, cell adhesions, in-vivo, integrin, mesenchymal stem-cells, morphogenetic protein-2, multifunctionality, osteoblastic differentiation, osteogenic differentiation, rgd-dwiva, rgd-peptides, titanium biofunctionalization, titanium surfaces, Animals, Biocompatible materials, Biomimetic peptides, Bone morphogenetic protein 2, Bone regeneration, Cell adhesions, Cell differentiation, Epitopes, Extracellular matrix, Integrins, Marrow stromal cells, Multifunctionality, Osteogenesis, Osteogenic differentiation, Peptides, Rats, Rgd-dwiva, Titanium, Titanium biofunctionalization

A dual approach employing peptidic biofunctionalization and laser micro-patterns on dental zirconia was explored, with the aim of providing a flexible tool to improve tissue integration of restorations. Direct laser interference patterning with a femtosecond Ti:Sapphire laser was employed, and two periodic grooved patterns were produced with a periodicity of 3 and 10 μm. A platform containing the cell-adhesive RGD and the osteogenic DWIVA peptides was used to functionalize the grooved surfaces. Topography and surface damage were characterized by confocal laser scanning (CLSM), scanning electron and scanning transmission electron microscopy techniques. The surface patterns exhibited a high homogeneity and subsurface damage was found in the form of nano-cracks and nano-pores, at the bottom of the valleys. Accelerated tests in water steam were carried out to assess hydrothermal degradation resistance, which slightly decreased after the laser treatment. Interestingly, the detrimental effects of the laser modification were reverted by a post-laser thermal treatment. The attachment of the molecule was verified trough fluorescence CLSM and X-ray photoelectron spectroscopy. Finally, the biological properties of the surfaces were studied in human mesenchymal stem cells. Cell adhesion, morphology, migration and differentiation were investigated. Cells on grooved surfaces displayed an elongated morphology and aligned along the patterns. On these surfaces, migration was greatly enhanced along the grooves, but also highly restricted in the perpendicular direction as compared to flat specimens. After biofunctionalization, cell number and cell area increased and well-developed cell cytoskeletons were observed. However, no effects on cell migration were found for the peptidic platform. Although some osteogenic potential was found in specimens grooved with a periodicity of 10 μm, the largest effects were observed from the biomolecule, which favored upregulation of several genes related to osteoblastic differentiation in all the surfaces.

JTD Keywords: alumina toughened zirconia, cell alignment, grain-size, implants, interference, laser patterning, osteogenic differentiation, osteointegration, peptides, surface functionalization, surface-topography, tissue, titanium surface, Laser patterning, Low-temperature degradation, Osteointegration, Peptides, Surface functionalization, Zirconia