Publications

This paper is aimed to develop ultrananoporous polarized hydroxyapatite (HAp) catalyst and evaluate its per-formance in transforming CO2 into useable ethanol considering three different scenarios: 1) a batch reaction using a mixture of CO2 and CH4 as feeding gas; 2) a batch reaction using as reactant exhaust gases captured from the fumes of diesel vehicles; and 3) a continuous flow reaction using pure CO2 as feeding gas. Ultrananoporous HAp scaffolds were prepared using a four-step process: 1) as prepared HAp powder was mixed with 60% wt. of a commercial hydrogel at low-temperature; 2) the resulting paste was shaped at low temperature to reduce the adhesion between the metallic tools and the mixture, enhancing the homogeneity of the sample; 3) the shaped paste was calcined in air by applying 1000 oC during 2 h to eliminate the hydrogel; and 4) an external DC electric field of 3 kV/cm was imposed at 1000 oC during 1 h to the calcined scaffold. The resulting polarized scaffolds both ultrananoporosity and catalytic activation. Thus, the mass: volume ratio of the ultrananoporous catalyst was much lower than that of conventional HAp catalyst (718 vs 5093 g/L. Furthermore, the ethanol yield was much higher (up to a factor of x21.4) for the ultrananoporous catalyst than for the compact one, allowing us to conclude that ultrananoporous polarized HAp catalyst is a promising technology for transforming CO2 into valuable chemical products from highly polluted gases, especially those coming from road, sea and air transport.

JTD Keywords: A: ceramics, Air pollution, Automotives, Batch reactions, Calcination, Carbon, Carbon dioxide, Co2 fixation, Co2 reduction, Desig, Electric fields, Environmental process, Ethanol, Exhaust gases, Feeding gas, Fumes, Hydrogels, Hydroxyapatite, Lows-temperatures, Nano-catalyst, Nanocatalysts, Polarized catalys, Polarized catalyst, Scaffolds, Temperature, ]+ catalyst

Conductive and interactive hydrogels based on hyaluronic acid are engineered as wound dressings that enhance skin tissue regeneration either through electrical stimulation or by displaying multifunctional performance and, ultimately, interactivity.

JTD Keywords: antibacterial, fields, Injectable hydrogels

The use of silver nanoparticles (Ag NPs) in the biomedical field deserves a mindful analysis of the possible inflammatory response which could limit their use in the clinic. Despite the anti-cancer properties of Ag NPs having been widely demonstrated, there are still few studies concerning their involvement in the activation of specific inflammatory pathways. The inflammatory outcome depends on the synthetic route used in the NPs production, in which toxic reagents are employed. In this work, we compared two types of Ag NPs, obtained by two different chemical routes: conventional synthesis using sodium citrate and a green protocol based on leaf extracts as a source of reduction and capping agents. A careful physicochemical characterization was carried out showing spherical and stable Ag NPs with an average size between 20 nm and 35 nm for conventional and green Ag NPs respectively. Then, we evaluated their ability to induce the activation of inflammation in Human Leukemic Monocytes (THP-1) differentiated into M0 macrophages using 1 µM and 2 µM NPs concentrations (corresponded to 0.1 µg/mL and 0.2 µg/mL respectively) and two-time points (24 h and 48 h). Our results showed a clear difference in Nuclear Factor ?B (NF-?b) activation, Interleukins 6–8 (IL-6, IL-8) secretion, Tumor Necrosis Factor-? (TNF-?) and Cyclooxygenase-2 (COX-2) expression exerted by the two kinds of Ag NPs. Green Ag NPs were definitely tolerated by macrophages compared to conventional Ag NPs which induced the activation of all the factors mentioned above. Subsequently, the exposure of breast cancer cell line (MCF-7) to the green Ag NPs showed that they exhibited antitumor activity like the conventional ones, but surprisingly, using the MCF-10A line (not tumoral breast cells) the green Ag NPs did not cause a significant decrease in cell viability. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.

JTD Keywords: activation, biosynthesis, gold nanoparticles, green route, inflammation response, mechanism, metal, nanotechnology, physico-chemical properties, raman-spectroscopy, resonance, silver nanoparticles, surface, Biomedical fields, Cell culture, Cell death, Chemical activation, Chemical routes, Conventional synthesis, Diseases, Green route, Inflammation response, Inflammatory response, Macrophages, Metal nanoparticles, Nf-kappa-b, Pathology, Physico-chemical properties, Physicochemical property, Property, Silver nanoparticles, Sodium compounds, Synthetic routes, Toxic reagents

A plethora of applications using polysaccharides have been developed in recent years due to their availability as well as their frequent nontoxicity and biodegradability. These polymers are usually obtained from renewable sources or are byproducts of industrial processes, thus, their use is collaborative in waste management and shows promise for an enhanced sustainable circular economy. Regarding the development of novel delivery systems for biotherapeutics, the potential of polysaccharides is attractive for the previously mentioned properties and also for the possibility of chemical modification of their structures, their ability to form matrixes of diverse architectures and mechanical properties, as well as for their ability to maintain bioactivity following incorporation of the biomolecules into the matrix. Biotherapeutics, such as proteins, growth factors, gene vectors, enzymes, hormones, DNA/RNA, and antibodies are currently in use as major therapeutics in a wide range of pathologies. In the present review, we summarize recent progress in the development of polysaccharide-based hydrogels of diverse nature, alone or in combination with other polymers or drug delivery systems, which have been implemented in the delivery of biotherapeutics in the pharmaceutical and biomedical fields. © 2021 American Chemical Society.

JTD Keywords: biodegradable dextran hydrogels, biotherapeutics, bone morphogenetic protein-2, carrageenan-based hydrogels, chitosan-based hydrogels, controlled delivery, controlled-release, cross-linked hydrogels, growth-factor delivery, hydrogels, in-vitro characterization, polysaccharides, self-healing hydrogel, stimuli-responsiveness, tissue engineering, Antibodies, Bioactivity, Biodegradability, Biomedical fields, Biomolecules, Biotherapeutics, Chemical modification, Circular economy, Controlled delivery, Controlled drug delivery, Delivery systems, Drug delivery system, Functional polymers, Hyaluronic-acid hydrogels, Hydrogels, Industrial processs, Polysaccharides, Recent progress, Renewable sources, Stimuli-responsiveness, Targeted drug delivery, Tissue engineering, Waste management

Purpose: In proton therapy, complex density heterogeneities within the beam path constitute a challenge to dose calculation algorithms. This might question the reliability of dose distributions predicted by treatment planning systems based on analytical dose calculation. For cases in which substantial dose errors are expected, resorting to Monte Carlo dose calculations might be essential to ensure a successful treatment outcome and therefore the benefit is worth a presumably long computation time. The aim of this study was to define an indicator for the accuracy of dose delivery based on analytical dose calculations in treatment planning systems for small proton therapy fields to identify those patients for which Monte Carlo dose calculation is warranted. Methods: Fourteen patients treated at our facility with small passively scattered proton beams (apertures diameters below 7 cm) were selected. Plans were generated in the XiO treatment planning system in combination with a pencil beam algorithm developed at the Massachusetts General Hospital and compared to Monte Carlo dose calculations. Differences in the dose to the 50% of the gross tumor volume (D50, GTV) were assessed in a field-by-field basis. A simple and fast methodology was developed to quantify the inhomogeneity of the tissue traversed by a single small proton beam using a heterogeneity index (HI) - a concept presented by Plugfelder [Med. Phys. 34, 1506-1513 (2007)10.1118/1. 2710329] for scanned proton beams. Finally, the potential correlation between the error made by the pencil beam based treatment planning algorithm for each field and the level of tissue heterogeneity traversed by the proton beam given by the HI was evaluated. Results: Discrepancies up to 5.4% were found in D50 for single fields, although dose differences were within clinical tolerance levels (<3%) when combining all of the fields involved in the treatment. The discrepancies found for each field exhibited a strong correlation to their associated HI-values (Spearman's ρ = 0.8, p < 0.0001); the higher the level of tissue inhomogeneities for a particular field, the larger the error by the analytical algorithm. With the established correlation a threshold for HI can be set by choosing a tolerance level of 2-3% - commonly accepted in radiotherapy. Conclusions: The HI is a good indicator for the accuracy of proton field delivery in terms of GTV prescription dose coverage when small fields are delivered. Each HI-value was obtained from the CT image in less than 3 min on a computer with 2 GHz CPU allowing implementation of this methodology in clinical routine. For HI-values exceeding the threshold, either a change in beam direction (if feasible) or a recalculation of the dose with Monte Carlo would be highly recommended.

JTD Keywords: Heterogeneities, Heterogeneity index, Monte Carlo, Proton therapy, Small fields