Publications

Anti-N-methyl-D-aspartate receptor encephalitis (NMDAR-E) is a prevalent autoimmune neurological disorder, yet T cell-driven immunopathology and its contributions to therapeutic resistance and fulminant neuroinflammation remain poorly defined. Integrative single-cell multi-omic profiling, combining single-cell RNA sequencing, single-cell T cell receptor (TCR) sequencing, and cellular indexing of transcriptomes and epitopes by sequencing, is applied to systematically map peripheral and cerebrospinal fluid (CSF) immune landscapes in treatment-na & iuml;ve NMDAR-E patients, with orthogonal validation conducted across independent cohorts via multiparameter flow cytometry and ex vivo NR1 peptide stimulation. Clonally expanded CX3CR1-expressing CD4+ and CD8+ T cells are identified as a core disease-associated effector population, characterized by high predicted affinity for the pathogenic GluN1 N368/G369 epitope, robust proinflammatory and cytotoxic transcriptional programs, and enhanced intercellular crosstalk with activated B cells through major histocompatibility complex (MHC), CD99, and macrophage migration inhibitory factor signaling axes. Preferentially enriched in patient CSF, these cells produce elevated interferon-gamma (IFN-gamma) and tumor necrosis factor-alpha (TNF-alpha) upon antigen-specific stimulation, collectively highlighting a disease-associated inflammatory T cell state linked to peripheral immune activation and CNS immune remodeling, with potential translational relevance for future biomarker and therapeutic investigation.

JTD Keywords: Anti-nmda receptor encephalitis, Brain, Cx3cr1, Expression, Neuroinflammation, Single-cell multi-omics, T cell receptor clonality, T cells, T-cells

Microelectro-mechanical (MEM) systems offer unique opportunities for miniaturized sensing platforms, yet their application in electrochemical measurements is often limited by the insulating nature of silicon and polymer coatings. In this work, a versatile activation strategy combining electrothermal (ET) reorientation and charged gas activation (CA) plasma treatments is applied to both pristine and poly(lactic acid) (PLA)-coated silicon MEM systems to enable multifunctional electrochemical and thermomechanical performance. The effect of ET reorientation, CA, and combined ET+CA treatments on the properties was systematically investigated. For uncoated MEM systems, CA and ET+CA significantly enhanced the surface wettability and electrochemical activity, leading to increased capacitive charge storage. While CA yielded the highest charge capacity, ET+CA provided a balanced improvement in the electrochemical performance and stability. In PLA-coated MEMs, the polymer layer acted as an insulating and protective coating, reducing electroactivity but improving stability; nevertheless, plasma-based treatments partially restored the electrochemical functionality. As a proof of concept, ET+CA-treated MEM systems demonstrated an enhanced dopamine detection. Thermomechanical analyses further revealed that PLA-coated MEM functions as sensitive biomaterial sensors, enabling the detection of glass transition and cold crystallization of PLA. Overall, the ET+CA approach transforms insulating MEM platforms into electro-responsive and thermomechanically sensitive devices suitable for advanced sensing applications.

JTD Keywords: Films, Glass-transition, Selective detection, Sensor, Thermal-analysis

The skin is the body's primary biological barrier, largely due to the highly organized structure of the stratum corneum (SC). Although essential for protection, this barrier function limits the efficacy of transdermal drug delivery, as most topically applied compounds fail to reach deeper skin layers at therapeutically relevant concentrations. Existing approaches often rely on physical disruption of the barrier, which can cause undesirable side effects. Moreover, many prior studies have been conducted in murine models, which do not accurately recapitulate human skin physiology, hindering the translation to humans. Here, we present an alternative approach using enzymatically powered nanomotors tested in a human reconstructed skin model. We developed organic nanomotors composed of poly(lactic-co-glycolic acid) functionalized with urease, and we proved their biocompatibility and degradability. Our results show that nanomotors penetrate the skin with 15.7% efficacy, 2.5 times more than passive nanoparticle controls. This enhanced penetration is attributed to their active motion and their ability to induce alterations in the lipid organization of the SC, an effect confirmed by synchrotron radiation small-angle X-ray scattering and electron microscopy. These findings highlight the potential of enzymatic nanomotors as a nondisruptive and effective platform for future transdermal delivery in human skin, combining advantages of both chemical enhancers and nanoparticles.

JTD Keywords: Barrier function, Biological barrier, Burden, Disease, Human skin model, Insights, Molecular-organization, Nanobots, Nanomedicine, Nanomotors, Nanoparticles, Permeation enhancers, Plga, Skin, Skin penetration, Spectroscopy, Transdermal delivery

Cells face diverse mechanical stimuli that vary with cell type, state, and pathological conditions. Mechanobiology investigates how cells sense and respond to these forces. While most work has focused on the cell surface and nucleus as primary mechanosensors, how intracellular organelles adapt to extracellular mechanical forces remains largely unknown. Here, we show that extracellular mechanical signals influence the secretory function of the Golgi apparatus. By subjecting adherent cells to mechanical challenges-cell spreading on different ligands, altered substrate stiffness, or equibiaxial strain-we reveal that extracellular forces modulate Golgi-to-cell surface carrier biogenesis, thereby regulating exocytosis. Together with changes in Golgi membrane tension, we identify molecular determinants of the mechanotransduction pathway, including microtubule acetylation, diacylglycerol production, and protein kinase D activity. In turn, inhibition of Golgi export suppresses this mechanoresponse and causes impaired cell spreading. These findings uncover a bidirectional mechanotransduction axis in which extracellular mechanics tune Golgi secretory output, providing a framework for investigating organelle-based mechanoadaptation in physiology and disease.

JTD Keywords: Actin dynamics, Exocytosis, Focal adhesions, Membrane tension, Microtubules, Nucleus, Protein-kinase-d, Secretory protein, Small-molecule inhibitor, Transport

There is broad consensus that intermediate filaments, such as keratin, play a key role in protecting cells and tissues from large deformations. However, little is known about how they fulfil this function. Here we show that epithelial cells slowly adapt to stretching through a coupling of a star-bundling transition of keratin filaments with the escape of the nucleus from its keratin cage. The bundling transition begins with a depletion of keratin filaments at tricellular junctions followed by a progressive accumulation in thick bundles that bisect cell-cell junctions. Bundling is a cooperative process that initiates in a few scattered cells and propagates to their neighbours, leading to the growth of multicellular clusters that contain a percolated network of thick keratin bundles. Bundling dynamics are slow and strongly influenced by the interaction between actin and keratin. Informed by a computational model, we provide evidence that keratin bundling generates a compressive stress on the nucleus, which is relaxed by nuclear escape from the keratin cage. The topological transitions identified here provide epithelia with a multiscale mechanism to adapt to sustained stretching.

JTD Keywords: Behavior, Cell, Intermediate-filaments, Junctions, Microscopy, Network, Phosphorylation, Plectin, Protein

Cells operate as networks of proteins, membranes, condensates and compartments, each sensing and displaying distinct intracellular mechanical properties. However, cells also sense, adapt and respond to manifold mechanical properties of the environment, including adhesion, tension, stiffness, shear, viscoelasticity, plasticity, pressure and confinement. By gauging these properties at various timescales and across nano to macro length scales, cellular systems alter their collective responses. The field of mechanobiology aims to elucidate how cellular systems such as tissues, organoids or organs perceive, respond to and influence mechanical cues, and how these impact physiological processes including homeostasis, growth, division, differentiation, movement, development, adaptation and apoptosis. This Perspective highlights challenges within mechanobiology that must be systematically tackled to advance exploration and deepen our understanding of the mechanical attributes of intricate multicellular organisms. Such understanding necessitates the engineering of multicellular models as reference systems, the development of new tools to rigorously quantify and manipulate mechanical properties from the nanoscale to macroscale and theoretical frameworks to decode mechanobiological complexities. Ultimately, addressing these challenges will improve the analysis, monitoring and prediction of mechanobiological processes across molecular, multicellular and organismal scales, thus advancing mechanodiagnostics and mechanomedicine.

JTD Keywords: Force microscopy, Migration, Stem-cell, Tension, Yap

Tuberculosis (TB), a disease caused by Mycobacterium tuberculosis, remains one of the major causes of death from infection worldwide, with over a million associated deaths each year. The study of biomarkers for TB is critical for advancing our understanding and management of the disease. Biomarkers, defined as measurable indicators of biological states or conditions, are invaluable for the diagnosis, prognosis and treatment monitoring of TB. Clinical studies have provided critical knowledge on the matter but are also notoriously constrained by economical, ethical and sampling limitations. The use of animal models provides a simpler, more controllable, cost-effective setting with great potential for translation to humans. They also allow the evaluation of biomarkers within the respiratory compartment, when available, which is of particular interest due to the nature of TB pathogenesis. This Review focuses on the current landscape of TB biomarker discovery in several animal models, from invertebrates to large mammals. Here we summarize the basics of host-pathogen immune interaction, describe the main methodological approaches used and highlight the most substantial findings for each animal model studied. Furthermore, we discuss the advantages, challenges and limitations associated with species-specific differences in animal models. We conclude that integrating the data obtained from animal models and human studies is absolutely required to advance the TB field to accelerate the management of this disease.

JTD Keywords: Cd4 t-cells, Drosophila-melanogaster, Experimental airborne tuberculosis, Gamma release assay, Guinea-pig, Host-parasite relationships, Ifn-gamma, Mycobacterium-tuberculosis, Nitric-oxide synthase, Pulmonary tuberculosis

Cancer-associated fibroblasts are major architects of the tumour stroma, where their aligned, elongated morphology forms a capsule that mechanically restrains tumour expansion. However, it is unclear how this supracellular organization emerges and persists. Here we show that fibroblasts generate a fibronectin matrix that progressively acquires the same nematic order as the cell layer, and that this matrix in turn feeds back to immobilize both cells and topological defects. Using long-term live imaging, traction force microscopy, matrix microfabrication and hydrodynamic modelling, we find that this reciprocal coupling induces an ageing process in which cellular flows and defect motion slow dramatically and ultimately freeze. Despite this arrest, the monolayer remains active, with defects concentrating contractile forces that may represent mechanical weak points. Disrupting fibronectin production fluidizes the capsule, reactivates defect dynamics and compromises its barrier-like function. These findings reveal a self-organizing mechanism by which fibroblasts and their matrix co-evolve to create a mechanically stable, yet active, stromal architecture with direct implications for tumour dissemination.

JTD Keywords: Cell-migration, Stress, Topological defects

Doping of calcium phosphates (CaPs) with bioinorganic ions is a widely used strategy to enhance their biological performance in bone regeneration. However, conventional methods for ionic incorporation in CaP scaffolds often require high-temperature treatments or involve multiple complex steps. Here, we present two simple strategies to dope 3D-printed CaP scaffolds via incorporation of ions into the apatitic phase during the hydrolysis of alpha-tricalcium phosphate (alpha-TCP) to calcium deficient hydroxyapatite (CDHA). In the first strategy, ions were incorporated directly into the printing ink, whereas in the second, undoped robocasted scaffolds were immersed in ionic solutions, allowing ion incorporation into precipitated CDHA during phase transformation. We investigated several ions, including strontium (Sr2+), magnesium (Mg2+), silicon (SiO44- ) and gallium (Ga3+). Sr2+ and Ga3+ were successfully incorporated into the scaffolds, either by direct ink doping (Sr2+) or by soaking in ionic solutions (Sr2+ and Ga3+). Direct incorporation of Sr2+ in the ink resulted in a higher ion loading and release, enhancing bone formation and bone quality, as evidenced by increased mineral-to-matrix ratio and Young's modulus, as well as osteoinductive properties relative to non-doped scaffolds. Furthermore, we demonstrated for the first time the osteoinductive capacity of Ga3+ in an ectopic in vivo model.

JTD Keywords: 3d printing, Apatite, Biomimetic hydroxyapatite, Bone regeneration, Calcium phosphates, Calcium-phosphate cement, Differentiation, Ion doping, Magnesium-deficiency, Microporosity, Nanocrystals, Osteoinduction, Scaffold, Silicon, Substituted hydroxyapatite, Vitro

Traction force microscopy (TFM) quantifies cellular forces at the cell-extracellular matrix interface, yet elastic formulations neglect viscous dissipation and can misinterpret cellular forces on viscoelastic substrates. We introduce a semi-analytical 2D viscoelastic TFM (veTFM) that generalizes the Boussinesq framework of elastic TFM to Generalized Maxwell (GMX) substrates with one or two components. By combining Fourier and Laplace transforms, veTFM quantifies time-resolved tractions in finite-thickness substrates and resolves stress-free reference and substrate pre-stress. We derive criteria for when elastic regimes remain valid in this framework. This positions veTFM as a scalable extension of standard 2D TFM (eTFM) to viscoelastic substrates, identifying when eTFM remains sufficient, which elastic limit applies, and when full viscoelastic quantification is required. Applied to beating cardiomyocytes, epithelial cells, and dermal fibroblasts cultured on linear-polyacrylamide and alginate viscoelastic hydrogels, veTFM shows that the elastic or viscoelastic regime engaged by the cell depends on timescale matching between the loading rate and the substrate's relaxation times. Notably, for the Generalized Maxwell substrates analyzed here, viscoelastic traction magnitudes scale with the substrate's total dissipation rather than individual relaxation times, with total dissipation setting traction magnitude and timescale matching determining whether the cell engages the substrate in an elastic or viscoelastic regime.

JTD Keywords: Animals, Biomaterials, Cell, Cell-material interactions, Cell–material interactions, Elasticity, Epithelial cells, Extracellular matrix, Extracellular-matrix viscoelasticity, Fibroblasts, Focal adhesions, Guide, Humans, Hydrogels, Microscopy, atomic force, Myocytes, cardiac, Numerical inversion, Semi-analytical methods, Semi‐analytical methods, Stress relaxation, Viscoelastic hydrogels, Viscoelastic traction force microscopy, Viscosity

Despite advances in bone graft design and surgical techniques, bacterial infection remains a major cause of graft failure, exacerbated by the global rise in antimicrobial resistance. This has intensified the pursuit of antibioticfree strategies to prevent bacterial colonization. Among these, antibacterial surface nanotopographies have emerged as promising tools, leveraging nanoscale geometries to physically disrupt bacteria upon contact. In this study, we engineered the surface of a calcium phosphate bone graft to confer antimicrobial functionality through a dual approach: the creation of high-aspect-ratio nanotopographies and ionic doping with fluoride. Through controlled hydrolysis of alpha-tricalcium phosphate by biomimetic and hydrothermal treatments, we generated calcium deficient hydroxyapatite nanoneedle structures whose morphology and biofunctionality were tuned via fluoride incorporation. XRD and Raman spectroscopy confirmed the formation of hydroxy-fluorapatite, with phase composition and surface morphology dependent on fluoride concentration and processing parameters. Fluoride doping significantly altered nanoneedle dimensions and spacing and enhanced bactericidal activity, particularly against P. aeruginosa, and to a lesser extent S. aureus. Notably, fluoride-doping alone showed no antibacterial effects; however, when combined with nanotopography, a synergistic increase in efficacy was observed. Importantly, the antimicrobial surfaces supported the proliferation and osteogenic differentiation of SaOS-2 cells. Co-culture assays modeling pre- and post-implantation infection scenarios demonstrated robust cell adhesion and markedly reduced bacterial colonization. In conclusion, our findings present a multifunctional, synthetic bone graft with both physical and chemical antibacterial properties, offering a promising strategy to mitigate infection risks while supporting osteointegration.

JTD Keywords: Antibacterial nanotopography, Bactericidal surfaces, Biomaterials, Bone regeneration, Calcium phosphate, Cements, Coatings, Cytokines, Fluoride, Hydroxyapatite, Infections, Magnesium, Pseudomonas-aeruginosa, Setting reaction

Background/Objectives: The question addressed in the current work is to develop a simulation of a pharmaceutical process (DNA encapsulation within lipid nanoparticles using a microfluidic micromixer) which will be of utility to the end users (laboratory-scale formulation development). The simulation and the microfluidic approach also address sustainability issues, such as reducing the environmental impact of the process itself, and reducing the need for physical testing. The paper details the implementation and validation, taking into account key performance indicators and control parameters. Methods: The main method applied for simulation development is a novel multi-agent approach to incorporate stochastic probabilistic behavior, combined with theoretical definitions from the process experts and relevant literature, and data/results from laboratory-scale experiments with different parameter configurations. Results: The simulation was implemented as a representation of the real physical process, reproducing the relationships between process parameters (flow rates) and experimental key performance indicators (capsule diameter, poly dispersion index, encapsulation efficiency). The simulation results demonstrated a general agreement with the empirical results and provided useful predictive insights for the laboratory experiments. Conclusions: The simulation has potential as a support tool for laboratory experiments to reduce physical testing and indicate the most promising configurations on which to focus, with potential savings in time, resources and other costs.

JTD Keywords: Calibration, Encapsulation, Lipid nanoparticles, Microfluidics, Micromixer, Multi-agents, Optimization, Process simulation, Sustainability

Background: Nuclear factor erythroid 2-related factor 2 (NRF2) regulates antioxidant defenses and protects against neurodegeneration, including Alzheimer's disease (AD). Its age-related decline disrupts redox balance and increases neuronal vulnerability, but the early hippocampal effects remain unclear. Here, we tested whether NRF2 loss affects tau seeding and spreading in a PHF-tau-inoculated mouse model, contributing to accelerated aging. Methodology: Three-month-old NRF2-knockout (Nfe2l2-/-) and wild-type (WT) mice received hippocampal inoculations of human AD-derived PHF-tau, and tau propagation was analyzed after three months. To elucidate the molecular underpinnings of the observed changes, we performed integrative phosphoproteotranscriptomic analyses of hippocampal tissue, supported by RT-qPCR and Western blot validation. Results: PHF-tau inoculation at 3 months of age in Nfe2l2-/- mice, surprisingly, exhibited markedly reduced tau seeding and spreading compared to WT after 3 months of incubation. Molecular characterization of the Nfe2l2-/- hippocampus was carried out to unravel the molecular changes associated with impaired tau propagation. Transcriptomic profiling revealed 745 deregulated genes in Nfe2l2-/- mice, characterized by upregulation of immune and metabolic pathways but downregulation of oxidative stress and redox-related genes. RT-qPCR confirmed diminished expression of antioxidant enzymes and anti-inflammatory receptors, alongside altered astrocytic markers. Proteomic analysis identified 157 dysregulated proteins associated with mitochondrial, synaptic, and inflammatory processes, while phosphoproteomics detected 824 altered phosphosites enriched in cytoskeletal and synaptic networks. Western blot showed increased GFAP-C-term, AQP4, 8-OHdG, and MDAL, with reduced GSTM2 expression. Notably, total and 4R-tau levels were decreased, while 3R-tau was elevated in Nfe2l2-/- mice. Conclusion: Our findings suggest that NRF2 loss induces a hippocampal state marked by impaired antioxidant defenses, astrocytic remodeling, and disrupted tau isoform balance. This environment, while metabolically altered, paradoxically hinders tau propagation, highlighting NRF2 as a key regulator of both redox and cellular maturity programs essential for tau spread and as a potential therapeutic target in tauopathies.

JTD Keywords: Aging, Alzheimer's disease, Brain, Disease progression, Expression, Fibrillary acidic protein, Inflammation, Mutations, Nrf2, Oxidative stress, Rat, Receptor, Tau, Transgenic mice

Oxidation is a major factor affecting the quality and shelf life of Extra Virgin Olive Oil (EVOO), leading to chemical degradation and loss of freshness. This study investigates the assessment of EVOO freshness using a peptide-based optoelectronic nose (OE-nose) system combined with signal processing and machine learning techniques. Volatile organic compound (VOC) profiles from fresh and oxidized EVOO samples were acquired using a multigas sensor array implemented on the Aryballe NeOse Advance platform. The oxidation status of the samples was validated using reference chemical quality analyses. Sensor signals were subjected to baseline correction and normalization, without the application of digital smoothing. Full-sequence analysis was employed to exploit desorption-phase kinetics as a volatility-driven, implicit preseparation mechanism, enabling robust discrimination without chromatographic steps. Exploratory and supervised models were evaluated, including principal component analysis (PCA), partial least-squares discriminant analysis (PLS-DA), and support vector machines (SVM). The SVM model achieved a classification accuracy of 100%, while PLS-DA reached 95.8% accuracy under strict validation conditions. Compared to conventional analytical methods, the proposed approach offers a rapid, nondestructive, and cost-effective solution for on-site EVOO freshness evaluation. To the authors' knowledge, this work represents the first application of a peptide-based optoelectronic nose for assessing EVOO oxidation, highlighting its potential advantages over conventional MOX- and polymer-based electronic nose systems reported in previous studies.

JTD Keywords: Evoo, Feature extraction, Fraud detection, Nondestructive quality control, Optoelectronic nose (oe-nose), Peace, justice and strong institutions, Reduced inequalities, Time-resolved headspace analysis

Neurodegenerative diseases, like Alzheimer's disease (AD), are characterized by the accumulation of tau aggregates, leading to neuronal dysfunction and cognitive decline. This study explores the development of dual-acting compounds combining sigma-1 receptor (sigma R-1) agonists and histone deacetylase inhibitors (HDACi) to target these pathological mechanisms. Compounds 2d and 3a demonstrated high affinity for sigma R-1 and significantly reduced tau aggregation and phosphorylation in vitro, notably at the AT8 epitope. These dual-acting compounds destabilized tau aggregates, increased tau solubility, and showed favorable pharmacokinetic properties, with compound 2d exhibiting enhanced chemical stability and longer half-life than 3a. In vivo, both compounds confirmed a sigma R-1 agonist profile by reversing the effect of the sigma R-1 antagonist BD-1063. This dual-action approach, acting on both HDAC and sigma R-1 pathways, holds significant potential for treating tauopathies. While further optimization and clinical evaluation are needed, these findings provide a strong foundation for the continued development of multimodal therapies for neurodegenerative diseases treatment.

JTD Keywords: Alzheimers, Amyloid-beta, Anavex2-73, Dual-acting compounds, Hdac inhibitors, Histone deacetylase, Ligands, Neurodegenerative diseases, Neuroprotection, Pathogenesis, Phenylbutyrate, Phenylbutyric acid, Phosphorylation, Sigma 1r agonists, Sigma receptors (sigma rs), Sigma(1) receptors, Tau protein, Valproic acid

Several procedures have been developed to enhance the rehabilitation of stroke patients. However, most techniques struggle to promote sustained recovery in the months following the treatment. Therefore, it is essential to understand the mechanisms that can be harnessed during treatment to potentiate retention of benefits and sustained recovery. While stroke patients often suffer from thalamocortical dysrhythmia (TCD), a perturbation in alpha (8-13 Hz) rhythms caused by decreased excitation in the cortico-thalamic projections, the functional relevance of TCD in stroke patients is not yet clear. We propose that TCD can be counteracted by combining focal stimulation of the motor cortex with virtual-reality (VR) based rehabilitation, which engages distributed networks associated with goal-oriented behavior. Critically, we investigate whether this can be the key to promoting sustained recovery in stroke patients. We compare thalamocortical rhythms and behavioral recovery in patients receiving Sham and bilateral tDCS stimulation of the motor cortex during therapy with the Rehabilitation Gaming System (RGS). Our results reveal that patients in the tDCS group show a sustained recovery in all clinical scales up to three months post-treatment, as opposed to the Sham group. Furthermore, we demonstrate that the slowing down of alpha rhythms can be counteracted by transcranial direct-current stimulation (tDCS), with a particular role for enhancing the excitability of parietal areas. That said, we found no correlation between changes in alpha rhythms and motor recovery. On one hand, our findings suggest that sustained recovery can be potentiated by tDCS-enhanced VR-based rehabilitation. On the other hand, enhancing the excitability of parietal areas while recruiting brain networks associated with goal-oriented behavior can successfully counteract TCD, even though this is likely not the main driver of sustained motor recovery.

JTD Keywords: Activation, Alpha rhythms, Deep brain-stimulation, Direct-current stimulation, Excitatory-inhibitory balance, Guidelines, Human thalamus, Involvement, Motor recovery, Quality-of-life, Rehabilitation, Sensitivity, Stroke, Transcranial direct-current stimulation

Calcium phosphate 3D printing has revolutionized customized bone grafting. However, its inherent fragility limits clinical applicability. In this work, this problem is overcome by designing a composite scaffold able to harden in vivo. An alpha-tricalcium phosphate/polycaprolactone scaffold is developed that is ductile and tough when freshly printed and undergoes a transformation to hydroxyapatite following implantation in the body, resulting in its hardening. The hardening reaction, that takes place under physiological conditions and its impact on the biological response and osteogenic capacity of the material are investigated, both in vitro and in vivo, by comparing the in vivo hardening scaffolds with 3D printed hydroxyapatite and hydroxyapatite/polycaprolactone counterparts. In vitro results confirm the bioactivity, osteogenicity, and immunomodulatory potential of the polycaprolactone-based scaffolds. MG-63 cells increase the expression of osteogenic markers, while a downregulation of proinflammatory cytokines is observed in RAW246.7 cells. In vivo evaluation in a rabbit model confirms progressive bone infiltration and maturation, while osteoclast-mediated scaffold degradation is observed, being gradually resorbed and replaced by newly formed bone. Overall, in vivo hardening alpha-tricalcium phosphate/polycaprolactone scaffolds achieve mechanical properties comparable to human trabecular bone while retaining the biocompatibility and osteogenic potential of biomimetic hydroxyapatite.

JTD Keywords: 3d printing, Biomaterials, Bone regeneration, Bone tissue engineering, Cells, Hydroxyapatite, Macrophages, Polarization, Regeneration, Size, Synthetic bone graft

The degeneration of the muscle in muscle dystrophies involves complex interactions among the different cell types. Here, we have used datasets from single-nuclei RNA sequencing (snRNAseq) of Duchenne Muscular Dystrophy (DMD) muscle samples to study the dysregulation of molecular pathways compared to healthy control muscle. We have observed that the epidermal growth factor (EGF) signaling is upregulated in DMD by an increase of the ligands EGF and EGF containing fibulin extracellular matrix protein 1 (EFEMP1). This study explores the role of EGF and EFEMP1 in FAPs and myoblasts in vitro. We provide evidence that EFEMP1 is secreted by FAPs in DMD and is mainly involved with increased myotube size but without enhancing muscle strength. Conversely, EGF enhances fibrotic differentiation in FAPs and promote smaller, proliferative myotubes in myoblasts, aligning with a fibrotic and dysfunctional muscle phenotype in DMD. The cellular differences from both ligands can be explained by the interactions with the receptor type, with EGF activating both EGFR and ErbB2, while EFEMP1 selectively maintained ErbB4 in an inactive state but promoting EGFR-ErbB2 and ErbB2-ErbB4 heterodimerization, potentially enhancing EGF signaling. Consequently, this study examinates the alteration of the EGF signalling in DMD and provides new molecular interactions in muscle that can be useful for targeted therapies of muscle degeneration.

JTD Keywords: Deposits, Efemp1, Migration, Regeneration, Satellite cells

Objective: Accurate detection of inspiratory onset and offset in the diaphragm electromyographic signal (EMGdi) is clinically relevant to assess patient-ventilator interaction in COPD patients undergoing non-invasive ventilation (NIV). Manual annotations are time-consuming and subject to inter-observer variability, highlighting the need for reliable automatic methods. Method: We developed a fully automatic algorithm to detect EMGdi activity cycles and their onset/offset timing in overnight NIV recordings. Four ECG suppression approaches were combined with root mean square (RMS) and fixed sample entropy (fSE) envelopes, and a novel bias correction strategy based on inspiratory-to-basal signal-to-noise ratio (I2BSNR) was introduced. Performance was compared with double-blind annotations from two independent experts. Results: In a cohort of 10 severe COPD patients (9212 annotated cycles), the best configuration (adaptive filtering with fSE exponential envelope) achieved F $1=0.96$ , with onset bias -28 ms (SD 270 ms) and offset bias + 120 ms (SD 292 ms). We show that fSE-based envelopes consistently outperform RMS in onset/offset detection, and that I2BSNR-based correction reduces systematic bias to within accepted clinical timing windows. Conclusions: The proposed method provides accurate and robust onset/offset detection of EMGdi during NIV in COPD patients. This enables reliable quantification of patient-ventilator asynchronies such as ineffective efforts and delayed cycling, offering direct clinical value for optimizing nightly ventilator settings in severe COPD. Clinical and Impact: Reliable detection of patient inspiratory activity offers a practical tool to guide real-time ventilator adjustments and reduce patient-ventilator asynchronies

JTD Keywords: Annotations, Asynchrony, Chronic obstructive pulmonary disease, Chronic obstructive pulmonary disease (copd), Electromyography, Emg, Filtering, Fixed sample entropy (fse)., Non-invasive ventilation (niv), Patient-ventilator asynchrony (pva), Recording, Reliability, Root mean square, Surface diaphragm electromyography (emgdi), Time, Timing, Ventilation, Ventilators

Astrocytes are central to brain homeostasis, supporting neuronal metabolism, synaptic activity, and the blood-brain barrier. With aging, these glial cells undergo molecular and functional changes that weaken support functions and promote neuroinflammation, contributing to neurodegeneration. Yet the systems-level mechanisms by which astrocytes respond to aging-related stressors remain poorly defined in human models. Because aging also heightens risk for cardiovascular disease, cognitive impairment, type 2 diabetes, and systemic inflammation, clarifying shared astrocytic pathways is critical for understanding brain-body crosstalk. Using an in vitro human astrocyte model exposed to sublethal oxidative stress (10 mu M H2O2) as a proxy for age-related cellular stress, we profiled transcriptomic changes and identified differentially expressed genes across antioxidant defenses, proteostasis, transcriptional regulation, vesicular trafficking, and inflammatory signaling. We then performed network-prioritization analyses on a curated human protein-protein interactome: one seeded with the astrocyte oxidative stress responsive genes and six with phenotype-associated gene sets (Alzheimer's disease, cardiovascular disease, cognitive impairment, type 2 diabetes, oxidative stress, and inflammation). Intersecting the top 5 % scoring genes from each run yielded a 127-gene core shared across all seven, enriched for proteostasis, DNA repair, mitochondrial regulation, and telomere and nuclear envelope maintenance. Structure-guided analyses highlighted vulnerable interfaces, including lamin A/C-lamin B1, alpha-actinin-filamins, 14-3-3 dimers, and aminoacyl-tRNA synthetase assemblies, where pathogenic variants are predicted to destabilize or aberrantly stabilize protein interactions. Structure-based interface predictions also highlight potential interactions between amyloid precursor protein (APP) and valosin-containing protein (VCP), and between p53 and 14-3-3 zeta, poten-tially linking proteostasis and stress signaling. Together, these analyses identify a conserved astrocyte-centered network signature that may relate neurodegenerative and cardiovascular processes, and prioritize structurally testable candidates for biomarker and intervention hypothesis testing.

JTD Keywords: 14-3-3-zeta, Aging-associated proteomic remodeling, Astrocytic vulnerability networks, Crosstalk, Disease, Dysfunction, Insights, Interactome, Interfaces, Mutations, Network-based gene-disease prioritization, Neurodegeneration-cardiovascular disease, Oxidative stress-responsive astrocyte pathways, Phosphorylation, Prediction, Proteostasis and mitochondrial dysfunction, Receptor, Structurally vulnerable proteinprotein, Structure-guided variant impact prediction, Telomere and nuclear envelope integrity, Update

Additive manufacturing enhances the catalyst performance via hierarchical design. To address environmental and resource concerns, this work aims to fabricate directly recycled 3D-printed monoliths using Direct-Ink Writing (DIW) from 100 % recovered cobalt-zirconia powders. Virgin cobalt-zirconia monoliths were firstly fabricated by DIW of 3.0-7.0 wt% Co-enriched hydrogel-based ceramic inks, followed by calcination at 600 degrees C in a single thermal treatment. After testing the catalytic performance of monoliths in ethanol steam reforming, 3Dprinted cobalt-zirconia monoliths were fragmented and subjected to subsequent milling and sieving steps to recover composite cobalt-zirconia powders with the appropriate properties for reuse in DIW. The recovered powders, inks and monoliths were microstructurally, rheologically and catalytically characterized, and then compared to catalysts constituted by virgin materials. The rheology properties of inks for the recycled and virgin monoliths presented an appropriate printability. Furthermore, the catalytic performance of recycled monoliths was close to that exhibited by virgin catalysts. This study demonstrates the feasibility of directly recycling fully 3D-printed catalysts, potentially reducing the environmental impact with a circular production model to enhance sustainability in the catalyst industry.

JTD Keywords: Additive manufacturing, Catalyst ethanol steam reforming, Cobalt catalysts, Direct-ink writing, Efficient, Heterogeneous catalyst, Hydrogen production, Ionically conductive supports, Monoliths, Nanoparticles, Oxidation, Performance, Recycled ceramics, Regeneration, Solid oxide fuel, Zirconia

A fully organic electrochemical cell was designed for the immobilization of l-lactic acid (LLA) and for the detection of lactate (LA) oxidation to pyruvate, representing a nonenzymatic sensor for in vitro LA analyses. The novelty relies on the preparation of a bilayer semiconducting electrode, composed of an inert and biocompatible poly(propylene) (PP) film and a coating of doped poly(3,4-ethylenedioxythiophene) (PEDOT), which served as both working and counter electrodes, for the monitoring of the LA/pyruvate redox reaction and the quantification of these biomolecules using electrochemical tools and UV-visible spectroscopy, respectively. An advantageous characteristic of PP/PEDOT-LA electrodes was the faster pyruvate release under electrical stimulation (by pulsed short-time voltage applications), reaching 100% conversion in 360 min. Such results were promoted by the replacement of aqueous electrolytes for a highly stable hydrogel, constituted of poly(gamma-glutamic acid) (gamma-PGA) cross-linked with cystamine, which was employed as a porous and permeable semisolid electrolyte in the polymer-based electrochemical cell (PEC). The resulting insights would help to improve the analytical methods currently employed for the quantification of LA in the biomedical, food, and beverage industries.

JTD Keywords: Electrodes, Ion, Supercapacitors

The actin cytoskeleton is remarkably adaptable and multifunctional. It often organizes into nematic bundles such as contractile rings or stress fibers. However, how a uniform and isotropic actin gel self-organizes into dense nematic bundles is not fully understood. Here, using an active gel model accounting for nematic order and density variations, we identify an active patterning mechanism leading to localized dense nematic structures. Linear stability analysis and nonlinear finite element simulations establish the conditions for nematic bundle self-assembly and how active gel parameters control the architecture, orientation, connectivity, and dynamics of self-organized patterns. Finally, we substantiate with discrete network simulations the main requirements for nematic bundle formation according to our theory, namely increased active tension perpendicular to the nematic direction and generalized active forces conjugate to nematic order. Our work portrays actin gels as reconfigurable active materials with a spontaneous tendency to develop patterns of dense nematic bundles.

JTD Keywords: Actin cytoskeleton, Alpha-actinin, Architecture, Cells, Contraction, Cooperate, Cortex, Drives, Mechanics, Myosin-ii, Nematic bundles, Self-organization, Stress fibers

Targeting therapeutic nanocarriers (NCs) to endothelial receptors favours transport across the blood-brain barrier (BBB), a main obstacle to access the brain. While these strategies compel validation in animals, quantitative sub-cellular resolution is non-viable in vivo. BBB-on-chip (BBB-oC) devices can help. Illustrating this, we used a BBB-oC comprising a lateral channel containing a human brain endothelial lining and a central chamber containing hydrogel-embedded pericytes and astrocytes. We studied NCs targeting intercellular adhesion molecule-1 (ICAM-1), a cell-surface protein overexpressed in pathology and involved in CAM-mediated transport. Brain access was validated in vivo after injection of NCs coated with anti-ICAM-1 vs. control IgG. ICAM-1 expression was verified in vitro using endothelial cells, pericytes, and astrocytes (756-, 511-, 690-fold over non-specific signal under TNF alpha). VE-cadherin presence and lack of dextran leakage demonstrated a restrictive BBB-oC barrier. Data showed endothelial targeting of anti-ICAM-1 NCs (428 NCs/cell at 1 h), uptake (60% of cell-interacting NCs), and transcytosis (90%; 24 h) downregulated by a CAM-pathway inhibitor (88% decay; 1 h). Non-transcyosed NCs trafficked to lysosomes, while transcytosed NCs interacted with pericytes and astrocytes (2643 NCs/cell; 24 h) and entered them (90% of transcytosed NCs). This BBB-oC represents a valuable model to evaluate ICAM-1-mediated transcytosis, complementing animal studies.

JTD Keywords: Blood-brain barrier, Design, Drug-delivery, Endothelial and basolateral interactions, Endothelium, Icam-1 targeting, Icam-1-targeted nanocarriers, Nanoparticles, Organ-on-a-chip, Targeted nanocarriers, Transcytosis mechanism, Transport

Implant-associated infections, primarily resulting from bacterial colonization, represent a significant challenge that frequently leads to implant failure. Antibacterial coatings, particularly those incorporating antimicrobial peptides (AMPs), offer a promising strategy for mitigating these infections. However, the application methods for these coatings-whether chemical or physical-face considerable challenges regarding stability and efficacy. In this study, we introduce a novel approach that employs zinc oxide nanoparticles (ZnONP) as an intermediary physical adhesive layer between titanium implants and the self-assembled AMP GL13K. The incorporation of ZnONP enhances hydrogen bonding interactions, facilitated by the nanostructured interface and the abundant hydroxyl groups on the ZnONP surface, thereby significantly improving the stability of the coating. Additionally, GL13K and ZnONP demonstrate synergistic antibacterial and immunomodulatory effects, as validated through in vitro and in vivo studies. The enhanced stability of the coating, combined with improved antibacterial, antiinflammatory, and osteogenic properties, collectively promotes osseointegration of mini-implants in a rat tibia infection model. Given the adaptability of this nanocoating system with other nanoparticles to further enhance hydrogen bonding, we propose it as a potential versatile solution for the supramolecular peptide coating of a diverse range of medical devices.

JTD Keywords: Antimicrobial peptide, Hydrogen bonding, Implant-associated infection, Self-assembly

Purpose: To interrogate animal physiology in vivo, there is a lack of non-genetic methods to control the activity of endogenous proteins with pharmacological and spatiotemporal precision. To address this need, we recently developed targeted covalent photoswitchable (TCP) compounds that enable the remote control of endogenous glutamate receptors (GluRs) using light. Methods: We combine the photopharmacological effector TCP9 with neuronal activity sensors to demonstrate all-optical reversible control of endogenous GluRs across multiple spatiotemporal scales in rat brain tissue ex vivo and in Xenopus tadpole brains in vivo. Findings: TCP9 allows photoactivation of neuronal ensembles, individual neurons, and single synapses in ex vivo tissue and in intact brain in vivo, which is challenging using optogenetics and neurotransmitter uncaging. TCP9 covalently targets AMPA and kainate receptors, maintaining their functionality and photoswitchability for extended periods (>8 h) after a single compound application. This allows tracking endogenous receptor physiology during synaptic plasticity events such as the reduction of functional AMPA receptors during long-term depression in hippocampal neurons. Conclusion: TCP9 is a unique non-invasive tool for durable labeling, reversible photoswitching, and functional tracking of native receptors in brain tissue without genetic manipulation.

JTD Keywords: 2-photon, Ampa receptors, Ampar, Azobenzene, Caged glutamate, Calcium imaging, Covalent drug, Dendritic spines, Hippocampus, Kainate, Long-term depression, Optical control, Optopharmacology, Photopharmacology, Photoswitch, Plasticity, Proteins, Pulse-chase, Rat, Subunit, Surface expression, Synaptic ampa, Xenopus, Zero hunger

Sleep apnea is common but often underdiagnosed after stroke, hindering rehabilitation and functional recovery. Access to sleep studies remains limited for stroke patients, partly due to the inconvenience of current diagnostic tools. The widespread availability and built-in sensors of smartphones make them powerful solutions for mobile health applications, including sleep monitoring. This study aims to detect and evaluate sleep apnea in post-stroke patients using a smartphone and extract multimodal digital biomarkers to characterize their sleep patterns. For that, overnight sleep tests were conducted on 30 subacute stroke patients and 30 age- and sex-matched control subjects, using a smartphone-based system that recorded audio, accelerometer, and oximetry data. Signals were analyzed with custom-made algorithms to compute respiratory, oxygenation, and sleep position indices. Results showed that the apnea-hypopnea index (AHI) was significantly higher in the stroke than the control group (28 +/- 19 vs 14 +/- 11, p = 0.006). Moderate-to-severe sleep apnea (AHI >= 15) was present in 67% of stroke patients and 40% of control subjects. Stroke patients spent more time mouth breathing (22% vs 12%, p

JTD Keywords: Association, Biomedical signal processing, Entropy, Heart-rate, Ischemic-stroke, Mhealth, Monitoring, Obesity, Oximetry, Positions, Prediction, Prevalence, Sleep apnea, Smartphone, Stroke, Supine sleep, Wearables

Aiming to transition towards sustainable design processes, plasma doping methods have been investigated as ultra-fast and solvent-free alternatives to chemical doping strategies. Despite their advantages, the current state-of-the-art plasma-doped materials present low doping percentages. Consequently, their acceptance as a replacement to conventional methods is still disfavoured. In this work, we propose a change in the paradigm by presenting a new approach termed high-performance plasma doping (HPPD) capable of intensively doping material lattices. To do so, HPPD exploits the higher number of available sites in vacancy-engineered materials for introducing dopants through non-thermal plasma (NTP) treatment. For this purpose, hydroxyapatite (HAp) is presented as a representative case example of successful HPPD. Thus, HAp disks with OH- lattice vacancies are prepared and treated for short times with NTP. All the HPPD samples are oxygen-doped successfully, displaying conductivity enhancement of up to one order of magnitude. In addition, doping for the entire material bulk is achieved, reaching a doping replacement efficiency of 50%. The proposed mechanism, based on oxygen diffusion through the OH- HAp columns, is corroborated through density functional theory (DFT) calculations. Results reveal the key role of lattice vacancies as charge imbalances, exercising an electronic pull on reactive gas species. Further assessment of the HPPD HAp is done through catalytic CO2 conversion reactions. Thus, the synthesis of C1-C3 products (including ethanol and formic acid, among others) from CO2 under mild conditions (150 degrees C and 6 bar of CO2) is achieved, realizing a total yield of 537.85 +/- 3.40 mu mol gc-1. Finally, the implications of HPPD and its extension towards other materials are discussed and highlighted by performing a state-of-the-art comparison.

JTD Keywords: Co2, Congo red, Conversion, Nanoparticles, Oxide, Photocatalytic degradation, Sites, Surface, Tio2

Complementary split ring resonators (CSRRs) have been extensively studied as planar sensors in the last two decades. However, their practical use remains limited to controlled environments and classification problems. Their performance relies on high-end vector network analyzers (VNAs), highly repeatable laboratory conditions, and special sample holders or microfluidic circuits hinders its regular use in chemistry laboratories as an analytical tool. Temperature drifts and humidity variations during measuring, uncertainties in the electromagnetic properties of the sample containers, and careless sample handling introduce significant uncertainties in measurements, leading to unreliable results. Therefore, the prediction of target compounds concentration in samples has been out of the research focus up to now. Machine learning (ML) algorithms can help to mitigate these uncertainties and open the applicability of CSRR sensors to quantification problems, where it is necessary to determine the amount of a substance in a liquid (or solid) sample. This work presents a novel approach that tackles this issue, combining a CSRR sensor with well-stabilized ML algorithms that enhance its quantification performance. For illustration purposes, a low-cost, benchtop CSRR-based system is proposed to predict ethanol concentration in water solutions. Ethanol samples from 10% to 96% concentration were prepared in commercial vials, generating 450 randomized measurements. Principal component analysis (PCA) was employed for data exploration, while a partial least squares (PLS) regression model, tuned with leave-one-group-out cross validation (LOGO-CV), was trained for ethanol concentration prediction. No feature extraction technique or noise reduction strategy was applied. Although this straightforward workflow is well known in the chemical sensing field, it has not been applied to data acquired with CSRR sensors. The trained model achieved a root mean square error in prediction (RMSEP) of 3.7% . Compared with 23.4% RMSEP when using univariate calibration at optimized frequencies, it presents a prediction performance reduced by a factor of 6. No evidence of underfitting or overfitting was observed during the test of the trained model. The low RMSEP achieved by the presented setup demonstrates the potential of CSRR-based sensors when combined with ML techniques for concentration prediction working in realistic, uncontrolled conditions. This pushes forward the applicability of CSRR sensors in the chemical analysis field, which might lead to benchtop, low-cost, and reliable analysis devices for many laboratories.

JTD Keywords: Chemical analysis, Chemical sensors, Complementary, Complementary split ring resonator (csrr) sensors, Concentration prediction, Design, Electronic mail, Ethanol, Feature extraction, Filters, Machine learning (ml), Metamaterials, Principal component analysis, Resonators, Rf sensors, Sensor phenomena and characterization, Sensors, Split-ring resonators, Temperature measurement, Transmission, Transmission line measurements, Uncertainty, Variable selection

Transcutaneous devices such as dental implants frequently fail due to infections at their interfaces with epithelial tissues. These infections are facilitated by the lack of integration between the devices and the surrounding soft tissues. This study aims to improve epithelial integration through surface modification of a transcutaneous implant material (polyetheretherketone (PEEK)). The modification involved covalent bonding of collagen via two distinct methods: (1) nonselective binding through any primary amines present on collagen using carbodiimide-based coupling and (2) site-specific binding to the free amine on the N-terminus of collagen molecules. The second approach preserves active sites responsible for interacting with integrins, crucial for epithelial cell adhesion, located near the C terminus. Both conjugation methods resulted in similar amounts of immobilized collagen; yet, surfaces with 2-PCA-based collagen conjugation exhibited 4 times more free amines. This indicates that fewer amines were used for conjugation in these samples, confirming that 2-PCA selectively binds collagen only through the N-terminus amines. Collagen-conjugated surfaces significantly enhanced HaCaT epithelial cell viability and adhesion compared to unmodified PEEK. Furthermore, 2-PCA-based conjugation resulted in a 2-fold increase in beta 4 subunit gene expression of integrin alpha 6 beta 4 (a key epithelial cell adhesion marker), higher integrin beta 4 immunofluorescence (IF) intensity, and over a 30% improvement in cell retention following mechanical detachment, compared to nonselective conjugation. These findings suggest that selective collagen conjugation on PEEK surfaces increases the accessibility of collagen domains responsible for binding with integrin receptors, which in turn improves epithelial cell attachment, offering a promising strategy for reducing infections and enhancing the longevity of transcutaneous devices.

JTD Keywords: Cell-adhesion, Conjugation, Domains, Fibroblasts, Fibronectin, Integrin, Matrix, Protein, Selective protein conjugation, Soft tissue integration, Strategies, Titanium surfaces, Transcutaneous implants

Lafora disease (LD) is a fatal childhood progressive myoclonus epilepsy and glycogen storage disease that is caused by recessive mutations in either EPM2A or EPM2B. The hallmarks of LD are cytoplasmic, aberrant glycogen-like aggregates, called Lafora bodies (LBs), that drive disease progression. The 9th Annual Lafora Science Symposium was held in San Diego, California and brought together over 70 researchers, clinicians, academic trainees, and friends and family members of patients with LD and 80 attendees joined virtually. This symposium focused primarily on international collaborations for therapeutic development and biomarker identification and strategies for preparing the Lafora community for upcoming clinical trials.

JTD Keywords: Childhood dementia, Cytoplasmic glycogen, Efficacy, Gene, Glycogen, Glycogen storage disease, Lafora disease, Mutations, Myoclonus epilepsy, Phosphatase, Progressive myoclonus epilepsy

Atomic force microscopy (AFM) is widely used to measure surface topography of solid, soft, and living matter at the nanoscale. Moreover, by mapping forces as a function of distance to the surface, AFM can provide a wealth of information beyond topography, with nanomechanical properties as a prime example. Here, a method based on photothermal off-resonance tapping (PORT) is presented to increase the speed of such force spectroscopy measurements by at least an order of magnitude, thereby enabling high-throughput, quantitative nanomechanical mapping of a wide range of materials. Specifically, photothermal actuation is used to modulate the position of the AFM probe at frequencies that far exceed those possible with traditional actuation by piezo-driven z scanners. Understanding and accounting for the microscale thermal and mechanical behavior of the AFM probe, the study determines the resulting probe position at sufficient accuracy to allow rapid and quantitative nanomechanical examination of polymeric and metallic materials.

JTD Keywords: Atomic force microscopy, Calibration, Dynamics, Force spectroscopy, Liqui, Liquid, Nanomechanical characterization, Off-resonance tapping, Photothermal excitatio, Photothermal excitation, Surface, Thermal noise

Cationic coatings on titanium surfaces are a promising approach for dental and biomedical implants due to their low-cost antimicrobial effect and no need for antibiotics. These coatings are applied on hydroxylated (-OH) surfaces using silanes, such as 3-aminopropyltriethoxysilane (APTES). However, it is unclear whether the concentration of this organofunctional compound affects surface charge or potential toxicity. This study investigated how different concentrations of APTES in cationic coatings on titanium samples influence electrostatic behavior and interactions with bacteria and mesenchymal stem cells (MSCs). Titanium discs served as controls (Ti group) and were first treated by plasma electrolytic oxidation (PEO) to generate -OH groups (PEO group). Subsequently, APTES was applied at 83.8, 167.6, and 251.4 mM, forming PEO+APTES0.3, PEO+APTES0.6, and PEO+APTES0.9 groups, respectively. Surfaces were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), contact angle, Zeta potential, and profilometry. Microbiological assays assessed initial bacterial adhesion (1 h) and biofilm formation (24 h) using Staphylococcus aureus and Escherichia coli. Cell metabolism was assessed on days 1, 3, and 8, while cell viability was assessed on days 1 and 3 using mesenchymal stem cells. PEO-treated surfaces showed porous morphology, and silanization increased roughness and shifted surfaces toward hydrophobicity. Amines and surface charge changes were confirmed by XPS and Zeta potential. Increasing APTES concentration did not proportionally increase cation number. Crystalline hydroxyapatite oxides were identified following the electrochemical process. SEM, EDS, and FTIR confirmed treatment stability after 28 days of immersion, while tribological tests indicated improved performance for PEO-treated groups. Cationic coatings reduced bacterial adhesion by up to 65%, decreased biofilm Log10 values, and increased dead bacteria proportion. Biocompatibility was confirmed by metabolism and cell viability tests, with the group with lower APTES concentration showing the best performance on day 8, with an 80% higher cell metabolism than day 1. On the other hand, higher concentrations of APTES resulted in reduced cell metabolism. These findings indicate, for the first time, that APTES concentration does not affect electrostatic properties but that lower concentrations are required for cytocompatible cationic coatings.

JTD Keywords: Adhesion, Biofilms, Cationic coating, Cell proliferation, Coatings, Electrostatic interactions, Implant surfaces, In-vitro, Nanoparticles, Osteoblasts, Oxidation, Self-assembled monolayers, Thin-films, Titanium, Wettability

The electrochemical response of alpha/beta-peptides with (L-Ala-beta-Fpg)n sequence, where beta-Fpg refers to syn 3-amino-2-(2-fluorophenyl)-3-phenylpropanoic acid, has been investigated examining the effects of the peptide length (n = 1-3), the stereochemistry of the beta 2,3-diaryl-amino acid and their self-assembly. alpha/beta-Peptides have been deposited by drop-casting on a conducting polymer (CP) film, which is previously electropolymerized on a stainless steel conducting substrate. The current-potential response of the CP coated by the different studied peptides suggests that, for alpha/beta-peptides, the role played by the electron transport through intermolecular stacking of aromatic side groups prevails over peptide length and stereochemistry. In order to prove such a hypothesis, the experimental conditions used to achieve an ordered self-assembly are optimized for one of the alpha/beta-peptides. The achieved self-assembled structures, which consist of well-defined long microfibers, considerably improve the electrochemical response of the CP. Finally, the prepared alpha/beta-peptide-based electrodes are used to electrochemically detect the oxidation of nicotinamide adenine dinucleotide (NADH). The analytical parameters are better for electrodes with well-defined peptide microfibers than for uncoated CP, corroborating the importance of pi-pi stacking interactions in the response of alpha/beta-peptides.

JTD Keywords: Acid, Alpha/beta-peptides, Beta-peptides, Bioelectronics, Design, Electron-transfer, Foldamers, Nadh, Nadh detection, Nanomaterials, Self-assembly, Stacking interactions

Non-small cell lung cancer (NSCLC) is the most common lung cancer type and one of the deadliest neoplasias worldwide. NSCLC is histologically classified into adenocarcinoma, squamous cell carcinoma, and other less frequent subtypes. Both subtypes and other solid tumors are increasingly regarded as abnormal organs, highlighting the critical role of the desmoplastic tumor stroma rich in cancer-associated fibroblasts (CAFs) in driving tumor progression and therapeutic resistance. This tumor stroma resembles a chronic fibrotic wound and is largely formed by activated/myofibroblast-like alpha-SMA+ CAFs (myCAFs), which are strongly associated with immunosuppression and poor prognosis. Despite the dominance of the myCAF phenotype, we reported a decade ago phenotypic alterations in NSCLC with a strong dependence on the histologic subtype. Subsequent studies using functional assays, single-cell techniques, and in vivo models have refined these initial observations, enhancing our understanding of the biology of both normal fibroblasts/myofibroblasts and CAFs in NSCLC and other cancer types, including their origins, subclassification, and physiopathologic functions. Notably, increasing evidence supports that CAFs can exhibit tumor-restraining or tumor-promoting effects, and current therapeutic efforts aim to shift the balance towards tumor-restraining phenotypes. Here, we review major advances in our understanding of tumor stromagenesis and CAF heterogeneity in both primary tumors and metastasis, including emerging consensus, with a special focus on NSCLC and its frequent dissemination to the brain. We also highlight the critical role of smoking through epigenetic reprogramming of the TGF-beta/SMAD3 pathway. These advances are beginning to delineate how CAF heterogeneity depends on the stage and histologic subtype in NSCLC.

JTD Keywords: Accumulation, Activation, Cancer-associated fibroblasts, Carcinoma-associated-fibroblasts, Desmoplasia, Differentiation, Generation, Localization, Metastasis, Microenvironment, Myofibroblast, Myofibroblasts, Non-small cell lung cancer, Progression, Stroma, Stromagenesis

Medical devices such as vascular grafts, stents, and catheters are crucial for patient treatment but often suffer suboptimal integration with host tissues due to the nature of their surfaces. The materials commonly used, including metals and synthetic polymers, frequently lead to undesired immune responses and device failure. In this context, coating their surfaces with designer proteins has arisen as a promising strategy to improve the device's biointegration. Here, we present a bioinspired method for coating biomaterial surfaces with protein-engineered polymers designed to mimic tailored functions from the native extracellular matrix (ECM). Combining mussel-inspired catechol chemistry with bioorthogonal click chemistry, we developed a modular grafting method for the surface functionalization of metallic and polymeric implants using a bifunctional peptide containing azide and DOPA (3,4-dihydroxyphenylalanine) groups. This simple dip-coating process enabled the fabrication of bioactive elastin-like coatings with precise peptide presentation. The results reveal enhanced bioactivity and cytocompatibility, as evidenced by improved endothelial cell adhesion, proliferation, and heparin-binding capacity on coated surfaces. The versatility and effectiveness of this bioorthogonal coating method suggest significant potential for creating implant surfaces tailored to diverse clinical applications.

JTD Keywords: Adhesion, Binding, Biofunctional coatings, Cell response, Click chemistry, Coatings, Dopa, Elastin-like recombinamers, Fibronectin, Peptides, Polymers, Protein adsorption, Surface functionalization, Surfaces, Titanium

The invasion of human embryos in the uterus overcoming the maternal tissue barrier is a crucial step in embryo implantation and subsequent development. Although tissue invasion is fundamentally a mechanical process, most studies have focused on the biochemical and genetic aspects of implantation. Here, we fill the gap by using a deformable ex vivo platform to visualize traction during human embryo implantation. We demonstrate that embryos apply forces remodeling the matrix with species-specific displacement amplitudes and distinct radial patterns: principal displacement directions for mouse embryos, expanding on the surface while human embryos insert in the matrix generating multiple traction foci. Implantation-impaired human embryos showed reduced displacement, as well as mouse embryos with inhibited integrin-mediated force transmission. External mechanical cues induced a mechanosensitive response, human embryos recruited myosin, and directed cell protrusions, while mouse embryos oriented their implantation or body axis toward the external cue. These findings underscore the role of mechanical forces in driving species-specific invasion patterns during embryo implantation.

JTD Keywords: Animals, Anterior-posterior axis, Biomechanical phenomena, Cells, Collagen, Differentiatio, Embryo implantation, Embryo, mammalian, Female, Humans, Mechanotransduction, cellular, Mice, Morphogenesis, Pregnancy, Range, Self-organization, Species specificity, Trophoblast invasion, Uterine contractions

Unjamming transitions from a solid-like to a fluid-like state are a gateway to breast epithelial cancer invasion. However, the mechanical interplay between phase transitions and dimension transitions, in particular wetting, remains elusive, despite being critical for understanding the onset of metastatic dissemination. This study shows that unjamming, mediated by the RAB5A GTPase, alters carcinoma spheroid fluidity, rigidity, and rewires adhesion mechanics to drive supracellular active wetting as a new mode of tumor expansion. Spheroid fluidification enhances the selective expression of integrin subunits and increases focal adhesion dynamics, inducing a fluid-like spreading behavior on specific matrix ligands. Notably, nanoscale regulation of integrin clustering can select for distinct phase transitions at the collective scale upon wetting. In this framework, fluidized spheroids polarize into cohesive "supracells", and maintain a stiff peripheral actin bundle as measured by nanomechanical mapping. Furthermore, a combination of Brillouin microscopy and 2.5D traction force analysis reveals a mechanical switch within the spheroid core, characterized by significant cell softening and a reduction in compressive forces exerted on the substrate, thereby mimicking the wetting of a liquid droplet. These findings establish unjamming-driven active wetting as a key mechanism to comprehend the molecular and biophysical underpinnings of solid tumor invasion.

JTD Keywords: Adhesion, Biophysics, Dynamics, Epithelia, Integrin, Mechanobiology, Mechanotransduction, Mesenchymal transitions, Paxillin, Rab5a-mediated breast carcinoma fluidification, Snai, Softening, Spheroid wetting, Supracellular motilit

Biohybrid actuators leveraging living muscle tissue offer the potential to replicate natural motion for biomedical and robotic applications. However, challenges such as limited force output and inefficient force transfer at tissue interfaces persist. The myotendinous junction, a specialized interface connecting muscle to the tendon, plays a critical role in efficient force transmission for movement. Engineering muscle-tendon units in vitro is essential for replicating native musculoskeletal functions in biohybrid actuators. Here, we present a three-dimensionally bioprinted system integrating skeletal muscle tissue with tendon-mimicking anchors containing fibroblasts, forming a biomimetic interdigitated myotendinous junction. Using computational models, we optimized muscle geometries to enhance deformation and force generation. The engineered system improved mechanical stability, myofiber maturation, and force transmission, generating contractile forces of up to 350 micronewtons over a 3-month period. This work highlights how biomimetic designs and mechanical optimization can advance bioactuator technologies for applications in medicine and robotics.

JTD Keywords: Fabrication, Fibrinoge, Fibroblasts, Interleukin-6, Proliferation, Skeletal-muscle, Soft, Stiffness, Stimulation, Tissue

Amyloid fibrils, which are aggregates of misfolded proteins characterized by 13-sheet-rich structures, are implicated in several neurodegenerative and systemic pathologies, including Alzheimer's and Parkinson's diseases and type II diabetes mellitus. Traditional amyloid markers, such as Congo Red and Thioflavin T, are widely used for amyloid detection but present limitations, particularly in cellular assays, due to spectral interference and aggregation inhibition. This study investigates YAT2150, a novel fluorescent dye with enhanced amyloid-binding specificity and sensitivity, as a potential alternative to conventional dyes. We evaluated YAT2150's efficacy for detecting amyloid aggregates in both in vitro and in cellula assays. First, we compared its fluorescence intensity and binding specificity to that of Thioflavin Tin amyloid fibril assays, demonstrating that YAT2150 exhibits high affinity and selectivity for amyloid structures, with minimal interference from non-aggregated proteins. Furthermore, we explored YAT2150's utility in Escherichia colt as a model system for studying protein aggregation and amyloid formation in a procaryotic cellular context. Our findings indicate that YAT2150 effectively labels amyloid-like inclusion bodies in E. colt producing a robust fluorescence signal with low background noise. These results suggest that YAT2150 is a promising new tool for amyloid research, offering greater sensitivity compared to traditional dyes, even in complex cellular environments.

JTD Keywords: Aggregation, Amyloid, Amyloid inhibitor, Bacterial inclusion-bodies, Detect, In-vitro, Inclusion bodies, Kinetics, Model, Parameters, Prion, Screening, Silico, Yat2150

The proteome of Plasmodium falciparum exhibits a marked propensity for aggregation. This characteristic results from the parasite's AT-rich genome, which encodes numerous proteins with long asparagine-rich stretches and low structural complexity, which lead to abundant intrinsically disordered regions. While this poses challenges for the parasite, the propensity for protein aggregation may also serve functional roles, such as stress adaptation, and could therefore be exploited by targeting it as a potential vulnerable spot in the pathogen. Here, we overexpressed an aggregation-prone segment of the P. falciparum ubiquitin transferase (PfUTf), an E3 ubiquitin ligase protein that has been previously demonstrated to regulate the stability of parasite proteins involved in invasion, development and drug metabolism. Overexpression of PfUTf in P. falciparum had evident phenotypic effects observed by transmission electron microscopy and confocal fluorescence microscopy, increased endogenous protein aggregation, disrupted proteostasis, and caused significant growth impairment in the parasite. Combined with dihydroartemisinin treatment, PfUTf overexpression had a synergistic effect that further compromised the parasites viability, linking protein aggregation to proteasome dysfunction. Changes in the distribution of aggregation-prone proteins, shown by the altered subcellular fluorescent pattern of the new investigational aggregated protein dye and antiplasmodial compound YAT2150 in the overexpressing P. falciparum line, highlighted the critical balance between protein aggregation, stress responses, and parasite viability, suggesting proteostasis-targeting therapies as a good antimalarial strategy.

JTD Keywords: plasmodium falciparum, Aggregation, Amyloid formation, Bodie, Disease, E3 ubiquitin ligases, Malaria parasite, Mechanism, Mutations, New antimalarial therapie, Peptides, Protein aggregation, Proteostasis disruption, Sequence, Stress

Bacterial infections pose a significant global health challenge aggravated by the rise of antimicrobial resistance (AMR). Among the obstacles preventing effective treatment are biological barriers (BBs) within the body such as the mucus layer. These BBs trap antimicrobials, necessitating higher doses and ultimately accelerating AMR. Addressing this issue requires innovative therapeutic strategies capable of bypassing BBs to deliver drugs more effectively. Here, we present nanomotors (NMs) based on hyaluronic acid (HA)- and urease-nanogels (NGs) as a solution to navigate effectively in viscous media by catalyzing the decomposition of urea into ammonium and carbon dioxide. These HA-based nanomotors (HA-NMs) were loaded with chloramphenicol (CHL) antibiotic and demonstrated superior antimicrobial activity against Escherichia coli(E. coli) compared to mesoporous silica NMs (MSNP-NMs), a reference in the field of NMs. Moreover, using an in vitro transwell model we evaluated the ability of HA-NMs to penetrate mucin barriers, effectively reducing E. coli proliferation, whereas the free antibiotic did not reduce bacteria proliferation. The optical density reduction at 24 h was over ten times greater than with free CHL. These organic-based enzyme-powered NMs represent a significant advancement in drug delivery, offering a promising approach to combat AMR while addressing the challenges of crossing complex BBs.

JTD Keywords: Bacterial infections, Biologicalbarriers, Design, Drug deliver, Enzyme, Mucu, Nanogels, Nanomotors, Nanoparticles

The structure and dynamics of important biological quasi-two-dimensional systems, ranging from cytoskeletal gels to tissues, are controlled by nematic order, flow, defects and activity. Continuum hydrodynamic descriptions combined with numerical simulations have been used to understand such complex systems. The development of thermodynamically consistent theories and numerical methods to model active nemato-hydrodynamics is eased by mathematical formalisms enabling systematic derivations and structured-preserving algorithms. Alternative to classical nonequilibrium thermodynamics and bracket formalisms, here we develop a theoretical and computational framework for active nematics based on Onsager's variational formalism to irreversible thermodynamics, according to which the dynamics result from the minimization of a Rayleighian functional capturing the competition between free-energy release, dissipation and activity. We show that two standard incompressible models of active nemato-hydrodynamics can be framed in the variational formalism, and develop a new compressible model for density-dependent active nemato-hydrodynamics relevant to model actomyosin gels. We show that the variational principle enables a direct and transparent derivation not only of the governing equations, but also of the finite element numerical scheme. We exercise this model in two representative examples of active nemato-hydrodynamics relevant to the actin cytoskeleton during wound healing and to the dynamics of confined colonies of elongated cells.

JTD Keywords: Active nematics, Bracket formulation, Equations, Finite element metho, Hydrodynamics, Instabilities, Model, Nematic defects, Onsager's variational formalism, Principle, Wound healing

Background/aims: Human mesenchymal stromal cells (hMSC) are multipotent adult cells commonly used in regenerative medicine as advanced therapy medicinal products. The expansion of these cells in xeno-free supplements is highly encouraged by regulatory agencies due to safety concerns. However, the number of supplements with robust performance and consistency for hMSC expansion are limited. Here, we evaluate a xeno-free human plasma-derived protein supplement (Plastem, Grifols) for the expansion and functional evaluation of hMSCs. Methods: hMSC from bone marrow, adipose tissue and umbilical cord were obtained from two suppliers and cultured in Dulbecco's modified Eagle's medium (DMEM/F-12) supplemented with fetal bovine serum 10% (FBS), human platelet lysate 5% (hPL) or Plastem 10%+ hPL0.5%. Cell proliferation was evaluated after culturing hMSC for 13 days with trypan blue exclusion. hMSC immunophenotype was assessed by flow cytometry of surface markers expression. Multipotentiality assay determined the ability of hMSC to differentiate into osteogenic, chondrogenic and adipogenic lineages after 21 days, by using specific staining. Immunomodulatory properties of hMSC were analyzed by measuring suppression of human peripheral blood mononuclear cell (PBMC) proliferation in co-culture with hMSC. Results: Plastem 10% + hPL 0.5% supported robust and sustained hMSC growth with a similar efficiency to the reference supplement FBS 10%. hMSC cultured with the xeno-free supplement presented a similar morphology comparable to FBS-supplemented cells and maintained typical expression of markers: positive (>95%) for CD90, CD73 and CD105; and negative (

JTD Keywords: Animal serum, Bone-marrow, Cell culture media, Cell therapy manufacturing, Expansion, Human mesenchymal stromal cells, Human platelet lysate, Immunomodulation, International-society, Multipotentiality, Proliferation, Serum-free media, Stem-cells, Substitut, Therapy, Xeno-fre

Arborescent (dendrigraft) polymers are high-molecular-weight dendritic macromolecules with a regular, multilevel branched topology and a high density of functional end groups in their periphery. Their well-defined architecture, devoid of cross-links or loops, imparts a particle-macromolecule duality that becomes particularly pronounced at interfaces. However, the underlying mechanisms governing their interfacial behavior remain largely unexplored. Here, we elucidate how the unique topology dictates the interfacial organization of water-soluble arborescent polymers. Using an iterative grafting-from approach via single-electron transfer living radical polymerization, we synthesized narrowly dispersed polymers with controlled branching and ultra-high molecular weight of 6.2 x 106 g mol-1. These polymers transition from spherical rigid particles in solution, to highly flexible, two-dimensional conformations upon interfacial adsorption. At solid interfaces, increasing segment density shifts surface morphologies from quasi-2D discs to fried-egg-like structures, as observed by atomic force microscopy and corroborated by dissipative particle dynamics simulations. At liquid-liquid interfaces, the absence of substrate constraints facilitates complete spreading into uniform 2D discs, driven by the energy gain due to polymer-segment adsorption. Furthermore, we uncover that macromolecular crowding and topological constraints inherent to the arborescent architecture dictate the response to compression of the adsorbed polymer layer, contrasting sharply with the behavior of conventional flexible linear or star polymers. The combination of high interfacial activity, spatially adaptable end groups, and extreme molecular flexibility will enable arborescent polymers to adapt to complex interfaces, acting as versatile platforms for multivalent and superselective interactions. These properties open new avenues for designing multivalent nanocarriers and adaptive interfacial materials with cooperative binding effects.

JTD Keywords: Angle neutron-scattering, Architectur, Graft, Microgels, Polymers, Polystyrene-graft-poly(2-vinylpyridine) copolymers, Polystyrenes, Radical polymerization, Set, Unimolecular micelles

Acetylcholine and the cholinergic system are crucial to brain function, including functions such as consciousness and cognition. Dysregulation of this system is implicated in the pathophysiology of neurological conditions such as Alzheimer's disease. For this reason, cholinergic neuromodulation is relevant in both basic neuroscience and clinical neurology. In this study, we used photopharmacology to modulate neuronal activity using the novel selective type-1 muscarinic (M1) photoswitchable drugs: the agonist benzyl quinolone carboxylic acid-azo-iperoxo (BAI) and the antagonist cryptozepine-2. Our aim was to investigate the control over these cholinergic receptors using light and to investigate the effects of these drugs on physiological spontaneous slow waves and on epileptic activity in the cerebral cortex. First, we used transfected HEK cell cultures and demonstrated BAI's preferential activation of M1 muscarinic acetylcholine receptors (mAChRs) compared with M2 mAChRs. Next, we found that white-light illumination of BAI increased the frequency of spontaneous slow-wave activity in brain cortical networks of both active slices and anesthetized mice, through M1-mAChRs activation. Illumination of cryptozepine-2 with UV light effectively suppressed not only the muscarinic-induced increase in slow-wave frequency, but also muscarinic-induced epileptiform discharges. These findings not only shed light on the role of M1 acetylcholine receptors in the cortical network dynamics but also lay the groundwork for developing advanced light-based pharmacological therapies. Photopharmacology offers the potential for high-precision spatiotemporal control of brain networks with high pharmacological specificity in both healthy and pathological conditions.

JTD Keywords: Acetylcholine, Acetylcholine-receptors, Biological health and medical sciences, Brain, Epilepsy, Hz oscillation, Less-than-1 hz, Modulation, Network mechanisms, Neuromodulation, Neuroscienc, Pathology, Photopharmacology, Seizures, Slee, Slow oscillations

A multiplexed microarray chip (Immuno-mu SARS2) aiming at providing information on the prognosis of the COVID-19 has been developed. The diagnostic technology records information related to the profile of the immunological response of patients infected by the SARS-CoV-2 virus. The diagnostic technology delivers information on the avidity of the sera against 28 different peptide epitopes and 7 proteins printed on a 25 mm2 area of a glass slide. The peptide epitopes (12-15 mer) derived from structural proteins (Spike and Nucleocapsid) have been rationally designed, synthesized, and used to develop Immuno-mu SARS2 as a multiplexed and high-throughput fluorescent microarray platform. The analysis of 755 human serum samples (321 from PCR+ patients; 288 from PCR- patients; 115 from prepandemic individuals and classified as hospitalized, admitted to intensive-care unit (ICU), and exitus) from three independent cohorts has shown that the chips perform with a 98% specificity and 91% sensitivity identifying RT-PCR+ patients. Computational analysis utilized to correlate the immunological signatures of the samples analyzed indicate significant prediction rates against exitus conditions with 82% accuracy, ICU admissions with 80% accuracy, and 73% accuracy over hospitalization requirement compared to asymptomatic patients' fingerprints. The miniaturized microarray chip allows simultaneous determination of 96 samples (24 samples/slide) in 90 min and requires only 10 mu L of sera. The diagnostic approach presented for the first time here could have a great value in assisting clinicians in decision-making based on the information provided by the Immuno-mu SARS2 regarding progression of the disease and could be easily implemented in diagnostics of other infectious diseases.

JTD Keywords: Antibodies, Clinical diagnostic, Diagnosis, High-throughput, Machine learning, Microarray, Multiplexation, Nucleocapsid protein, Peptide epitopes, Sars-cov-, Sars-cov-2, Serological signature, Seroprevalence, Severity prediction, Spik

Historical processes in community assembly, such as species arrival order, influence interactions, causing priority effects. Candida albicans and Pseudomonas aeruginosa often co-occur in biofilm-based infections of the skin, lungs, and medical devices. Their predominantly antagonistic relationship involves complex physical and chemical interactions. However, the presence and implications of priority effects among these microorganisms remain largely unexplored. Here, we investigate the presence and impact of priority effect in dual-species biofilms using clinical isolates. By varying inoculation order, we observe significant changes in biofilm composition, structure, virulence, and antimicrobial susceptibility. The first colonizer has an advantage for surface colonization. Consecutive colonization increases biofilm virulence and negates C. albicans' protective effect on P. aeruginosa PAET1 against meropenem treatment. Finally, we propose N-acetylcysteine as an adjuvant for treating C. albicans and P. aeruginosa interkingdom infections, working independently of priority effects.

JTD Keywords: Airway colonization, Bacteria, Infections, Pneumonia, Spp., Virulenc

Gas sensor-based electronic noses (e-noses) have gained considerable attention over the past thirty years, leading to the publication of numerous research studies focused on both the development of these instruments and their various applications. Nonetheless, the limited specificity of gas sensors, along with the common requirement for chemical identification, has led to the adaptation and incorporation of analytical chemistry instruments into the e-nose framework. Although instrument-based e-noses exhibit greater specificity to gasses than traditional ones, they still produce data that require correction in order to build reliable predictive models. In this work, we introduce the use of a multivariate signal processing workflow for datasets from a multi-capillary column ion mobility spectrometer-based e-nose. Adhering to the electronic nose philosophy, these workflows prioritized untargeted approaches, avoiding dependence on traditional peak integration techniques. A comprehensive validation process demonstrates that the application of this preprocessing strategy not only mitigates overfitting but also produces parsimonious models, where classification accuracy is maintained with simpler, more interpretable structures. This reduction in model complexity offers significant advantages, providing more efficient and robust models without compromising predictive performance. This strategy was successfully tested on an olive oil dataset, showcasing its capability to improve model parsimony and generalization performance.

JTD Keywords: Breath, Chromatography, Classification, Electronic nose, Hs-gc-ims, Ion mobility spectrometry, Mcc-ims-based e-nose, Olive oi, Olive oil, Parsimony, Preprocessing, Quality control, Selection, Signal processing workflow, System, Too, Validation, Wavelet

The intricate interactions between the host immune system and its microbiome constituents undergo dynamic shifts in response to perturbations to the intestinal tissue environment. Our ability to study these events on the systems level is significantly limited by in situ approaches capable of generating simultaneous insights from both host and microbial communities. Here, we introduce Microbiome Cartography (MicroCart), a framework for simultaneous in situ probing of host and microbiome across multiple spatial modalities. We demonstrate MicroCart by investigating gut host and microbiome changes in a murine colitis model, using spatial proteomics, transcriptomics, and glycomics. Our findings reveal a global but systematic transformation in tissue immune responses, encompassing tissue-level remodeling in response to host immune and epithelial cell state perturbations, bacterial population shifts, localized inflammatory responses, and metabolic process alterations during colitis. MicroCart enables a deep investigation of the intricate interplay between the host tissue and its microbiome with spatial multi-omics.

JTD Keywords: Animals, Bacteria, Cellular microenvironment, Colitis, Design, Disease models, animal, Environment, Fis, Gastrointestinal microbiome, Glycomics, Host microbial interactions, Intestinal mucosa, Intestines, Male, Mice, Mice, inbred c57bl, Multiomics, Organization, Probes, Proteins, Proteomics, Rna, Subcellular resolution, Transcriptome

Bio-nano interactions have been extensively explored in nanomedicine to develop selective delivery strategies and reduce systemic toxicity. To enhance the delivery of nanocarriers to cancer cells and improve the therapeutic efficiency, different nanomaterials have been developed. However, the limited clinical translation of nanoparticle-based therapies, largely due to issues associated with poor targeting, requires a deeper understanding of the biological phenomena underlying cell-nanoparticle interactions. In this context, we investigate the molecular and cellular mechanobiology parameters that control such interactions. We demonstrate that the pharmacological inhibition or the genetic ablation of the key mechanosensitive component of the Hippo pathway, i.e., yes-associated protein, enhances nanoparticle internalization by 1.5-fold. Importantly, this phenomenon occurs independently of nanoparticle properties, such as size, or cell properties such as surface area and stiffness. Our study reveals that the internalization of nanoparticles in target cells can be controlled by modulating cell mechanosensing pathways, potentially enhancing nanotherapy specificity.

JTD Keywords: Bio-nano interactions, Comple, Mechanobiology, Mechanotransductio, Nanoparticles, Yap/taz

The discovery that sponges (Porifera) can fully regenerate from aggregates of dissociated cells launched them as one of the earliest experimental models to study the evolution of cell adhesion and allorecognition in animals. This process depends on an extracellular glycoprotein complex called the Aggregation Factor (AF), which is composed of proteins thought to be unique to sponges. We used quantitative proteomics to identify additional AF components and interacting proteins in the classical model, Clathria prolifera, and compared them to proteins involved in cell interactions in Bilateria. Our results confirm MAFp3/p4 proteins as the primary components of the AF but implicate related proteins with calx-beta and wreath domains as additional components. Using AlphaFold, we unveiled close structural similarities of AF components to protein domains in other animals, previously masked by the mutational decay of sequence similarity. The wreath domain, believed to be unique to the AF, was predicted to contain a central beta- sandwich of the same organization as the vWFD domain (also found in extracellular, gel- forming glycoproteins in other animals). Additionally, many copurified proteins share a conserved C- terminus, containing divergent immunoglobulin (Ig) and Fn3 domains predicted to serve as an AF-interaction interface. One of these proteins, MAF- associated protein 1, resembles Ig superfamily cell adhesion molecules and we hypothesize that it may function to link the AF to the surface of cells. Our results highlight the existence of an ancient toolkit of conserved protein domains regulating cell-cell and cell-extracellular matrix protein interactions in all animals, and likely reflect a common origin of cell adhesion and allorecognition.

JTD Keywords: Adhesion, Allorecognitio, Binding, Calcium, Carbohydrate-carbohydrate interactions, Cell-cell adhesion, Evolution, Marine sponge, Microciona-prolifera, Molecule, Porifera, Protein, Proteomics, Recepto, Recognition

Candida albicans and Staphylococcus aureus have been co-isolated from several biofilm-associated diseases, including those related to medical devices. This association confers advantages to both microorganisms, resulting in detrimental effects on the host. To elucidate this phenomenon, the present study investigated colony changes derived from non-physical interactions between C. albicans and S. aureus. We performed proximity assays by confronting colonies of the yeast and the bacteria on agar plates at six different distances for 9-10 days. We found that colony variants of S. aureus originated progressively after prolonged exposure to C. albicans proximity, specifically in response to pH neutralization of the media by the fungi. The new phenotypes of S. aureus were more virulent in a Galleria mellonella larvae model compared to colonies grown without C. albicans influence. This event was associated with an upregulation of RNA III and agrA expression, suggesting a role for alpha-toxin. Our findings indicate that C. albicans enhances S. aureus virulence by inducing the formation of more aggressive colonies. This highlights the importance of understanding the intricate connection between environmental responses, virulence and, fitness in S. aureus pathogenesis.

JTD Keywords: Agr system, Aureus, Biofil, Expression, Galleria mellonella, Gene regulator agr, Interkingdom interactions, Pathogenicit, Polymicrobial interactions, Proximity assay, Synergistic effects

The field of G protein-coupled receptor (GPCR) research has greatly benefited from the spatiotemporal resolution provided by light controllable, i.e., photoswitchable ligands. Most of the developed tools have targeted the Rhodopsin-like family (Class A), the largest family of GPCRs. However, to date, all such Class A photoswitchable ligands were designed to act at the orthosteric binding site of these receptors. Herein, we report the development of the first photoswitchable allosteric modulators of Class A GPCRs, designed to target the M-1 muscarinic acetylcholine receptor. The presented benzyl quinolone carboxylic acid (BQCA) derivatives, Photo-BQCisA and Photo-BQCtrAns, exhibit complementary photopharmacological behavior and allow reversible control of the receptor using light as an external stimulus. This makes them valuable tools to further investigate M-1 receptor signaling and a proof of concept for photoswitchable allosteric modulators at Class A receptors.

JTD Keywords: Agonist, Allosterism, Gpcr, Muscarinic ligands, Photopharmacology, Photoswitc, Selective activation, Serie

Objective:To investigate the spermidine pathway capability to predict patients at risk for tumor recurrence following colorectal cancer (CRC) surgery.Background:Recurrence rates after CRC surgery remain at about 20% despite an optimal technique and adjuvant therapy when necessary. Identification of risk biomarkers of recurrence is an unmet need. The spermidine pathway is indispensable for cell proliferation and differentiation, and is suggested to accelerate tumor spread.Methods:This was a prospective cohort study of patients undergoing CRC surgery from 2015 to 2018. Plasma samples were collected before surgery and on postoperative day 4, and the spermidine pathway was assessed through mass spectrometry. Oncological outcomes were registered.Results:A total of 146 patients were included and 24 (16.4%) developed tumor recurrence. Higher levels of preoperative spermidine pathway components (spermidine, spermine, spermidine synthase enzyme, and spermine/arginine balance) were positively associated with recurrence. Surgery promoted a decrease in these pathway elements. The greater the decline was, the lower the risk of recurrence. Preoperative spermidine over the cut-off of 0.198 mu M displayed a 4.69-fold higher risk of recurrence. The spermine synthase enzyme behaved in the opposite direction.Conclusions:The spermidine pathway is associated with tumor recurrence following CRC surgery and, after confirmation in larger cohorts, could be translated as a risk biomarker of recurrence into clinical practice.

JTD Keywords: Adjuvant chemotherapy, Colon-cancer, Colorectal cancer, Energ, Metabolomics, Polyamine levels, Postoperative intraabdominal infection, Spermidine pathway, Stage, Tumor recurrenc

Biomaterial-associated infections (BAIs) pose significant challenges in modern medical technologies, being a major postoperative complication and leading cause of implant failure. These infections significantly risk patient health, resulting in prolonged hospitalization, increased morbidity and mortality rates, and elevated treatment expenses. This comprehensive review examines the mechanisms driving bacterial adhesion and biofilm formation on biomaterial surfaces, offering an in-depth analysis of current antimicrobial strategies for preventing BAIs. We explore antimicrobial-eluting biomaterials, contact-killing surfaces, and antifouling coatings, emphasizing the application of antifouling polymer brushes on medical devices. Recent advancements in multifunctional antimicrobial biomaterials, which integrate multiple mechanisms for superior protection against BAIs, are also discussed. By evaluating the advantages and limitations of these strategies, this review aims to guide the design and development of highly efficient and biocompatible antimicrobial biomaterials. We highlight potential design routes that facilitate the transition from laboratory research to clinical applications. Additionally, we provide insights into the potential of synthetic biology as a novel approach to combat antimicrobial resistance. This review aspires to inspire future research and innovation, ultimately improving patient outcomes and advancing medical device technology.

JTD Keywords: Animals, Anti-bacterial agents, Antifouling coatings, Antimicrobial peptide, Antimicrobial-eluting coatings, Antimicrobial‐eluting coatings, Bacterial adhesion, Bacterial biofilm formation, Biocompatible materials, Biofilms, Biomaterial-associated infections, Biomaterial‐associated infections, Contact killing coatings, Humans, In-vitr, Infused porous surfaces, Metal-oxide surfaces, Multifunctional antimicrobial coating, Multifunctional antimicrobial coatings, Poly(l-lysine)-g-poly(ethylene glycol) layers, Polymer brushes, Prosthesis-related infections, Silicone oil, Superhydrophobic surfaces, Urinary catheters

Mesenchymal stem cells (MSCs) interact with their surroundings via integrins, which link to the actin cytoskeleton and translate physical cues into biochemical signals through mechanotransduction. N-cadherins enable cell-cell communication and are also linked to the cytoskeleton. This crosstalk between integrins and cadherins modulates MSC mechanotransduction and fate. Here we show the role of this crosstalk in the mechanosensing of viscosity using supported lipid bilayers as substrates of varying viscosity. We functionalize these lipid bilayers with adhesion peptides for integrins (RGD) and N-cadherins (HAVDI), to demonstrate that integrins and cadherins compete for the actin cytoskeleton, leading to an altered MSC mechanosensing response. This response is characterised by a weaker integrin adhesion to the environment when cadherin ligation occurs. We model this competition via a modified molecular clutch model, which drives the integrin/cadherin crosstalk in response to surface viscosity, ultimately controlling MSC lineage commitment. The crosstalk between cell-cell and cell-matrix adhesions regulates stem cell fate. Here, the authors reveal a critical role for matrix viscosity in controlling this crosstalk, which they explain via a modified molecular clutch model.

JTD Keywords: Actin cytoskeleton, Adhesion, Animals, Arginyl-glycyl-aspartic acid, Cadherins, Cell adhesion, Cell communication, Fibronectin, Force transmission, Humans, Hydrogel, Integrins, Lipid bilayers, Matrix, Mechanotransduction, Mechanotransduction, cellular, Mesenchymal stem cells, Mobility, Oligopeptides, Osteogenic differentiation, Substrate stiffness, Vinculin, Viscosity

Herein, a facile approach toward converting a three-dimensional polyurethane sponge (PUS), employed in endoluminal vacuum-assisted closure (endo-VAC) therapies, in a theranostic material able to detect and to inhibit bacteria growth, has been reported. The endo-VAC PUS presented sensitivity to Gram-positive and Gramnegative bacterial species thanks to its functionalization with gold and silver antibacterial nanoparticles (NPs). PUS with chitosan-stabilized Au-NPs achieved 5.26 f 0.17 logs and 2.78 f 0.34 logs of reduction of bacteria growth, whereas the sponges functionalized with phenolated lignin Ag-NPs offered slightly inferior values (4.77 f 0.36 logs and 2.03 f 0.37 logs, respectively), against Escherichia coli and Staphylococcus aureus pathogens, respectively, after the application of photothermal ablation. The in vitro antimicrobial studies were contrasted with the in-situ monitoring of bacteria localization and inactivation with excitation lasers of 532 and 785 nm wavelengths, respectively, in the Raman equipment. The novel theranostic nano-enabled antimicrobial PU sponges offer unprecedented possibilities for the improvement of the endo-VAC treatments and extrapolation of the methodology to other plastic-based implants to combat antimicrobial resistances.

JTD Keywords: Adhesiv, Gold nanoparticles, Lignin, Molecular-mechanism, Polyurethane, Silver nanoparticles, Surface activation, Surface enhanced raman scatterin

Endothelium, the lining in this blood vessel, orchestrates three main critical functions such as protecting blood components, modulating of hemostasis by secreting various inhibitors, and directing clot digestion (fibrinolysis) by activating tissue plasminogen activator. No other surface can perform these tasks; thus, the contact of blood and blood-contacting medical devices inevitably leads to the activation of coagulation, often causing device failure, and thromboembolic complications. This perspective, first, discusses the biological mechanisms of activation of coagulation and highlights the efforts of advanced coatings to recapitulate one characteristic of endothelium, hereafter single functions of endothelium and noting necessity of the synergistic integration of its three main functions. Subsequently, it is emphasized that to overcome the challenges of blood compatibility an endothelium-mimicking system is needed, proposing a synergy of bottom-up synthetic biology, particularly synthetic cells, with passive- and bioactive surface coatings. Such integration holds promise for developing advanced biomaterials capable of recapitulating endothelial functions, thereby enhancing the hemocompatibility and performance of blood-contacting medical devices. The activation of coagulation on the surface of blood-contacting medical devices often leads to thromboembolic complications. A concept for the next generation of hemocompatbile surfaces inspired by endothelium is proposed. This concept not only contribute to the fundamental understanding of hemocompatibility but also offer practical implications for the design and development of biomedical devices with enhanced biocompatibility and functionality. image

JTD Keywords: Animals, Antifouling coatings, Antifouling polymer brushes, Biocompatible materials, Blood coagulation, Coagulation-factor-xii, Coated materials, biocompatible, Endothelium, Endothelium, vascular, Endothelium-inspired, Endothelium‐inspired, Hemocompatibility, Hemocompatible surface coatings, Hemostasis, Heparin-induced thrombocytopenia, Humans, Nitric-oxide release, Of-the-art, Peptide macrocycle inhibitor, Plasma contact system, Protein-adsorption, Self-assembled monolayers, Surface modificatio, Synthetic endotheliu, Synthetic endothelium

The performance of single-chain polymeric nanoparticles (SCPNs) in biomedical applications highly depends on their conformational stability in cellular environments. Until now, such stability studies are limited to 2D cell culture models, which do not recapitulate the 3D tumor microenvironment well. Here, a microfluidic tumor-on-a-chip model is introduced that recreates the tumor milieu and allows in-depth insights into the diffusion, cellular uptake, and stability of SCPNs. The chip contains Matrigel/collagen-hyaluronic acid as extracellular matrix (ECM) models and is seeded with cancer cell MCF7 spheroids. With this 3D platform, it is assessed how the polymer's microstructure affects the SCPN's behavior when crossing the ECM, and evaluates SCPN internalization in 3D cancer cells. A library of SCPNs varying in microstructure is prepared. All SCPNs show efficient ECM penetration but their cellular uptake/stability behavior depends on the microstructure. Glucose-based nanoparticles display the highest spheroid uptake, followed by charged nanoparticles. Charged nanoparticles possess an open conformation while nanoparticles stabilized by internal hydrogen bonding retain a folded structure inside the tumor spheroids. The 3D microfluidic tumor-on-a-chip platform is an efficient tool to elucidate the interplay between polymer microstructure and SCPN's stability, a key factor for the rational design of nanoparticles for targeted biological applications.© 2024 The Authors. Small Methods published by Wiley-VCH GmbH.

JTD Keywords: 3d cancer cell uptake, Cancer cells, Cell culture, Cell uptake, Cellular uptake, Diseases, Ecm penetration, Extracellular matrices, Extracellular matrix penetration, Functional polymers, Hydrogen bonds, Medical applications, Microfluidics, Microstructure, Nanoparticles, Polymeric nanoparticles, Scpns, Single chains, Single-chain polymeric nanoparticle, Stability, Tumor-on-a-chip, Tumors

Cells sense and respond to mechanical forces through mechanotransduction, which regulates processes in health and disease. In single adhesive cells, mechanotransduction involves the transmission of force from the extracellular matrix to the cell nucleus, where it affects nucleocytoplasmic transport (NCT) and the subsequent nuclear localization of transcriptional regulators, such as YAP (also known as YAP1). However, if and how NCT is mechanosensitive in multicellular systems is unclear. Here, we characterize and use a fluorescent sensor of nucleocytoplasmic transport (Sencyt) and demonstrate that NCT responds to mechanical forces but not cell density in cell monolayers. Using monolayers of both epithelial and mesenchymal phenotype, we show that NCT is altered in response both to osmotic shocks and to the inhibition of cell contractility. Furthermore, NCT correlates with the degree of nuclear deformation measured through nuclear solidity, a shape parameter related to nuclear envelope tension. In contrast, YAP is sensitive to cell density, showing that the YAP response to cell-cell contacts is not via a mere mechanical effect of NCT. Our results demonstrate the generality of the mechanical regulation of NCT.

JTD Keywords: Cell nucleu, Cell nucleus, Deformation, Growth, Induction, Lamin, Mechanobiology, Mechanotransduction, Sensor, Stress, Triggers, Volume, Yap/taz

Only 30% of embryos from in vitro fertilized oocytes successfully implant and develop to term, leading to repeated transfer cycles. To reduce time-to-pregnancy and stress for patients, there is a need for a diagnostic tool to better select embryos and oocytes based on their physiology. The current standard employs brightfield imaging, which provides limited physiological information. Here, we introduce METAPHOR: Metabolic Evaluation through Phasor-based Hyperspectral Imaging and Organelle Recognition. This non-invasive, label-free imaging method combines two-photon illumination and AI to deliver the metabolic profile of embryos and oocytes based on intrinsic autofluorescence signals. We used it to classify i) mouse blastocysts cultured under standard conditions or with depletion of selected metabolites (glucose, pyruvate, lactate); and ii) oocytes from young and old mouse females, or in vitro-aged oocytes. The imaging process was safe for blastocysts and oocytes. The METAPHOR classification of control vs. metabolites-depleted embryos reached an area under the ROC curve (AUC) of 93.7%, compared to 51% achieved for human grading using brightfield imaging. The binary classification of young vs. old/in vitro-aged oocytes and their blastulation prediction using METAPHOR reached an AUC of 96.2% and 82.2%, respectively. Finally, organelle recognition and segmentation based on the flavin adenine dinucleotide signal revealed that quantification of mitochondria size and distribution can be used as a biomarker to classify oocytes and embryos. The performance and safety of the method highlight the accuracy of noninvasive metabolic imaging as a complementary approach to evaluate oocytes and embryos based on their physiology.

JTD Keywords: Ai, Consumption, Culture, Embryo development, Fluorescence, Hyperspectral imagin, Implantation, In vitro fertilization, Infertility, Label-free imaging, Microscopy, Morphokinetics, Oxygen concentrations, Selectio, Time-lapse

The development of smart biomedical devices as efficient tools in early diagnosis and therapy monitoring has recently witnessed unprecedented growth, becoming an emerging field in biomedical engineering. Sponges for endoluminal vacuum therapy, which are intended for transmitting negative pressure as trigger for tissue regeneration and for draining infections in anastomotic leakages, are massively used implants with very complex geometry and high risk of infection. In this work, commercial polyurethane (PU) sponges have been converted into smart biomedical devices by incorporating an electrochemical sensor to monitor the growth of bacteria. Such innovative approach, which allows to track the tissue healing process avoiding further infection development, has been performed applying a three-step process: 1) activation of PU using low pressure oxygen plasma; 2) incorporation of conducting polymer (CP) nanoparticles (NPs) at the surface of the activated PU by chemical oxidative polymerization; and 3) formation of a homogeneous electroactive coating using the CP NPs obtained in 2), as growth nuclei in an electrochemical polymerization. The functionalized PU sponge is able to monitor the bacteria growth in the surrounding media by detecting the concentration of nicotinamide adenine dinucleotide (NADH) from respiration reactions in the cytosol (i.e. bacteria do not have mitochondria). Conversely, respiration in normal eukaryotic cells takes place in the mitochondria, whose double membrane is not permeable to NADH. The sensing performance of the CP-coated PU sponges (limit of detection: 0.06 mM; sensitivity: 1.21 mA/cm2) has been determined in the lab using NADH solutions, while a proof of concept have been conducted using Escherichia coli bacteria cultures.

JTD Keywords: Conducting polymer, Desig, Electrochemical coating, Esophageal cancer, Nadh, Pedot, Polyurethane functionalization, Selective detection, Sponge functionalizatio

Conventional osteogenic platforms utilize active growth factors to repair bone defects that are extensive in size, but they can adversely affect patient health. Here, an unconventional osteogenic platform is reported that functions by promoting capture of inactive osteogenic growth factor molecules to the site of cell growth for subsequent integrin-mediated activation, using a recombinant fragment of latent transforming growth factor beta-binding protein-1 (rLTBP1). It is shown that rLTBP1 binds to the growth-factor- and integrin-binding domains of fibronectin on poly(ethyl acrylate) surfaces, which immobilizes rLTBP1 and promotes the binding of latency associated peptide (LAP), within which inactive transforming growth factor beta 1 (TGF-beta 1) is bound. rLTBP1 facilitates the interaction of LAP with integrin beta 1 and the subsequent mechanically driven release of TGF-beta 1 to stimulate canonical TGF-beta 1 signaling, activating osteogenic marker expression in vitro and complete regeneration of a critical-sized bone defect in vivo. An osteogenic platform that functions by capturing inactive growth factor molecules is engineered to overcome conventional challenges associated with the use of active growth factors. The platform triggers capture of inactive transforming growth factor beta-1 for its subsequent integrin-mediated activation which activates osteogenic downstream signaling in vitro and fully repairs critical-sized bone defect in vivo. image

JTD Keywords: Animals, Bone, Bone defect, Bone regeneration, Cell proliferation, Cells, Chemical activation, Defects, Differentiation, Fibronectin, Fibronectins, Growth factor, Growth factors, Humans, Integrin beta1, Integrins, Latency associated peptides, Latent tgf-beta binding proteins, Ltbp1, Osteogenesis, Osteogenic, Protein binding, Recombinant proteins, Release, Repair, Signal transduction, Surface properties, Tgf-beta, Tgf-β1, Transforming growth factor beta1, Transforming growth factors

Clinical relevance of miRNAs as biomarkers is growing due to their stability and detection in biofluids. In this, diagnosis at asymptomatic stages of Alzheimer ' s disease (AD) remains a challenge since it can only be made at autopsy according to Braak NFT staging. Achieving the objective of detecting AD at early stages would allow possible therapies to be addressed before the onset of cognitive impairment. Many studies have determined that the expression pattern of some miRNAs is dysregulated in AD patients, but to date, none has been correlated with downregulated expression of cellular prion protein (PrP C ) during disease progression. That is why, by means of cross studies of miRNAs up -regulated in AD with in silico identification of potential miRNAs-binding to 3 ' UTR of human PRNP gene, we selected miR-519a-3p for our study. Then, in vitro experiments were carried out in two ways. First, we validated miR-519a-3p target on 3 ' UTR- PRNP , and second, we analyzed the levels of PrP C expression after using of mimic technology on cell culture. In addition, RT-qPCR was performed to analyzed miR519a-3p expression in human cerebral samples of AD at different stages of disease evolution. Additionally, samples of other neurodegenerative diseases such as other non -AD tauopathies and several synucleinopathies were included in the study. Our results showed that miR-519a-3p overlaps with PRNP 3 ' UTR in vitro and promotes downregulation of PrP C . Moreover, miR-519a-3p was found to be up -regulated exclusively in AD samples from stage I to VI, suggesting its potential use as a novel label of preclinical stages of the disease.

JTD Keywords: 3' untranslated regions, Activation, Aged, Aged, 80 and over, Alzheimer disease, Alzheimer's disease, Biomarke, Biomarker, Biomarkers, Brain, Cellular prion protein, Developmental expression, Female, Gen, Humans, Male, Micrornas, Mirn519 microrna, human, Plasma, Prion proteins, Prnp protein, human, Prpc, Prpc proteins, Tau-aggregation

Photocatalytic nanomotors have attracted a lot of attention because of their unique capacity to simultaneously convert light and chemical energy into mechanical motion with a fast photoresponse. Recent discoveries demonstrate that the integration of optical and magnetic components within a single nanomotor platform offers novel advantages for precise motion control and enhanced photocatalytic performance. Despite these advancements, the impact of magnetic fields on energy transfer dynamics in photocatalytic nanomotors remains unexplored. Here, we introduce dual-responsive rod-like nanomotors, made of a TiO2/NiFe heterojunction, able to (i) self-propel upon irradiation, (ii) align with the direction of an external magnetic field, and (iii) exhibit enhanced photocatalytic performance. Consequently, when combining light irradiation with a homogeneous magnetic field, these nanomotors exhibit increased velocities attributed to their improved photoactivity. As a proof-of-concept, we investigated the ability of these nanomotors to generate phenol, a valuable chemical feedstock, from benzene under combined optical and magnetic fields. Remarkably, the application of an external magnetic field led to a 100% increase in the photocatalytic phenol generation in comparison with light activation alone. By using various state-of-the-art techniques such as photoelectrochemistry, electrochemical impedance spectroscopy, photoluminescence, and electron paramagnetic resonance, we characterized the charge transfer between the semiconductor and the alloy component, revealing that the magnetic field significantly improved charge pair separation and enhanced hydroxyl radical generation. Consequently, our work provides valuable insights into the role of magnetic fields in the mechanisms of light-driven photocatalytic nanomotors for designing more effective light-driven nanodevices for selective oxidations.

JTD Keywords: Charge transfer, Dual-responsive nanomotors, Magnetic properties, Photoactive nanomotors, Photocatalysis, Selective oxidations

Cholesterol, a crucial component of cell membranes, influences various biological processes, including membrane trafficking, signal transduction, and host-pathogen interactions. Disruptions in cholesterol homeostasis have been linked to congenital and acquired conditions, including neurodegenerative disorders such as Alzheimer's disease (AD). Previous research from our group has demonstrated that herpes simplex virus type I (HSV-1) induces an AD-like phenotype in several cell models of infection. This study explores the interplay between cholesterol and HSV-1-induced neurodegeneration. The impact of cholesterol was determined by modulating its levels with methyl-beta-cyclodextrin (M beta CD) using the neuroblastoma cell lines SK-N-MC and N2a. We have found that HSV-1 infection triggers the intracellular accumulation of cholesterol in structures resembling endolysosomal/autophagic compartments, a process reversible upon M beta CD treatment. Moreover, M beta CD exhibits inhibitory effects at various stages of HSV-1 infection, underscoring the importance of cellular cholesterol levels, not only in the viral entry process but also in subsequent post-entry stages. M beta CD also alleviated several features of AD-like neurodegeneration induced by viral infection, including lysosomal impairment and intracellular accumulation of amyloid-beta peptide (A beta) and phosphorylated tau. In conclusion, these findings highlight the connection between cholesterol, neurodegeneration, and HSV-1 infection, providing valuable insights into the underlying mechanisms of AD.

JTD Keywords: Alzheimer's disease, Arterial cells, Beta-amyloid, Cholesterol, Hsv-1, Hyperphosphorylated ta, Infection, Lysosomal alterations, Methyl-beta-cyclodextrin, Neuroblastoma cells, Neurodegeneration, Syste

Amyotrophic lateral sclerosis (ALS) is a devastating neurodegenerative disease characterized by the progressive loss of motor neurons in the spinal cord. Glial cells, including astrocytes and microglia, have been shown to contribute to neurodegeneration in ALS, and metabolic dysfunction plays an important role in the progression of the disease. Glycogen is a soluble polymer of glucose found at low levels in the central nervous system that plays an important role in memory formation, synaptic plasticity, and the prevention of seizures. However, its accumulation in astrocytes and/or neurons is associated with pathological conditions and aging. Importantly, glycogen accumulation has been reported in the spinal cord of human ALS patients and mouse models. In the present work, using the SOD1G93A mouse model of ALS, we show that glycogen accumulates in the spinal cord and brainstem during symptomatic and end stages of the disease and that the accumulated glycogen is associated with reactive astrocytes. To study the contribution of glycogen to ALS progression, we generated SOD1G93A mice with reduced glycogen synthesis (SOD1G93A GShet mice). SOD1G93A GShet mice had a significantly longer life span than SOD1G93A mice and showed lower levels of the astrocytic pro-inflammatory cytokine Cxcl10, suggesting that the accumulation of glycogen is associated with an inflammatory response. Supporting this, inducing an increase in glycogen synthesis reduced life span in SOD1G93A mice. Altogether, these results suggest that glycogen in reactive astrocytes contributes to neurotoxicity and disease progression in ALS.© 2023 The Authors. Journal of Neurochemistry published by John Wiley & Sons Ltd on behalf of International Society for Neurochemistry.

JTD Keywords: activation, astrocytes, brain, contributes, expression, glycogen, impairment, mice, motor neurons, neurodegeneration, reactive astrocytes, spinal cord, Amyotrophic lateral sclerosis, Astrocytes, Glycogen, Motor neurons, Motor-neuron degeneration, Neurodegeneration, Spinal cord

Steroid myopathy is a clinically challenging condition exacerbated by prolonged corticosteroid use or adrenal tumors. In this study, we engineered a functional three-dimensional (3D) in vitro skeletal muscle model to investigate steroid myopathy. By subjecting our bioengineered muscle tissues to dexamethasone treatment, we reproduced the molecular and functional aspects of this disease. Dexamethasone caused a substantial reduction in muscle force, myotube diameter and induced fatigue. We observed nuclear translocation of the glucocorticoid receptor (GCR) and activation of the ubiquitin-proteasome system within our model, suggesting their coordinated role in muscle atrophy. We then examined the therapeutic potential of taurine in our 3D model for steroid myopathy. Our findings revealed an upregulation of phosphorylated AKT by taurine, effectively countering the hyperactivation of the ubiquitin- proteasomal pathway. Importantly, we demonstrate that discontinuing corticosteroid treatment was insufficient to restore muscle mass and function. Taurine treatment, when administered concurrently with corticosteroids, notably enhanced contractile strength and protein turnover by upregulating the AKT-mTOR axis. Our model not only identifies a promising therapeutic target, but also suggests combinatorial treatment that may benefit individuals undergoing corticosteroid treatment or those diagnosed with adrenal tumors.

JTD Keywords: 3d bioengineered skeletal muscle tissues, Adrenal cortex hormones, Atroph, Colocalization, Corticosteroids, Dexamethasone, Glucocorticoid-receptor, Humans, Mechanisms, Models, biological, Mtor protein, human, Muscle contraction, Muscle fibers, skeletal, Muscle strength, Muscle, skeletal, Muscular diseases, Organ size, Phosphorylation, Proteasome endopeptidase complex, Proto-oncogene proteins c-akt, Receptors, glucocorticoid, Signal transduction, Skeletal-muscle, Steroid myopathy, Steroids, Supplementation, Taurin, Taurine, Tor serine-threonine kinases, Ubiquitin

[No abstract available]

JTD Keywords: Breathing, Cost, Developed country, Developing countries, Developing country, Health care facility, Home monitoring, Human, Humans, Internet, Internet of things, Letter, Lowest income group, Lung function, Lung mechanics, Lung resistance, Mathematical model, Middle income country, Mobile applications, Non invasive procedure, Open source technology, Oscillometry, Pneumotachygraphy, Telemedicine

This paper is aimed to develop ultrananoporous polarized hydroxyapatite (HAp) catalyst and evaluate its per-formance in transforming CO2 into useable ethanol considering three different scenarios: 1) a batch reaction using a mixture of CO2 and CH4 as feeding gas; 2) a batch reaction using as reactant exhaust gases captured from the fumes of diesel vehicles; and 3) a continuous flow reaction using pure CO2 as feeding gas. Ultrananoporous HAp scaffolds were prepared using a four-step process: 1) as prepared HAp powder was mixed with 60% wt. of a commercial hydrogel at low-temperature; 2) the resulting paste was shaped at low temperature to reduce the adhesion between the metallic tools and the mixture, enhancing the homogeneity of the sample; 3) the shaped paste was calcined in air by applying 1000 oC during 2 h to eliminate the hydrogel; and 4) an external DC electric field of 3 kV/cm was imposed at 1000 oC during 1 h to the calcined scaffold. The resulting polarized scaffolds both ultrananoporosity and catalytic activation. Thus, the mass: volume ratio of the ultrananoporous catalyst was much lower than that of conventional HAp catalyst (718 vs 5093 g/L. Furthermore, the ethanol yield was much higher (up to a factor of x21.4) for the ultrananoporous catalyst than for the compact one, allowing us to conclude that ultrananoporous polarized HAp catalyst is a promising technology for transforming CO2 into valuable chemical products from highly polluted gases, especially those coming from road, sea and air transport.

JTD Keywords: A: ceramics, Air pollution, Automotives, Batch reactions, Calcination, Carbon, Carbon dioxide, Co2 fixation, Co2 reduction, Desig, Electric fields, Environmental process, Ethanol, Exhaust gases, Feeding gas, Fumes, Hydrogels, Hydroxyapatite, Lows-temperatures, Nano-catalyst, Nanocatalysts, Polarized catalys, Polarized catalyst, Scaffolds, Temperature, ]+ catalyst

Over the past decades, the development of nanoparticles (NPs) to increase the efficiency of clinical treatments has been subject of intense research. Yet, most NPs have been reported to possess low efficacy as their actuation is hindered by biological barriers. For instance, synovial fluid (SF) present in the joints is mainly composed of hyaluronic acid (HA). These viscous media pose a challenge for many applications in nanomedicine, as passive NPs tend to become trapped in complex networks, which reduces their ability to reach the target location. This problem can be addressed by using active NPs (nanomotors, NMs) that are self-propelled by enzymatic reactions, although the development of enzyme-powered NMs, capable of navigating these viscous environments, remains a considerable challenge. Here, the synergistic effects of two NMs troops, namely hyaluronidase NMs (HyaNMs, Troop 1) and urease NMs (UrNMs, Troop 2) are demonstrated. Troop 1 interacts with the SF by reducing its viscosity, thus allowing Troop 2 to swim more easily through the SF. Through their collective motion, Troop 2 increases the diffusion of macromolecules. These results pave the way for more widespread use of enzyme-powered NMs, e.g., for treating joint injuries and improving therapeutic effectiveness compared with traditional methods. The conceptual idea of the novel approach using hyaluronidase NMs (HyaNMs) to interact with and reduce the viscosity of the synovial fluid (SF) and urease NMs (UrNMs) for a more efficient transport of therapeutic agents in joints.image

JTD Keywords: Biological barrier, Clinical research, Clinical treatments, Collective motion, Collective motion,nanomotors,nanorobots,swarming,viscous medi, Collective motions, Complex networks, Enzymatic reaction, Enzymes, Hyaluronic acid, Hyaluronic-acid,ph,viscoelasticity,adsorption,barriers,behavior,ureas, Macromolecules, Medical nanotechnology, Nano robots, Nanomotors, Nanorobots, Swarming, Synovial fluid, Target location, Viscous media, Viscous medium

Micro/nanomotors (MNMs) have evolved from single self-propelled entities to versatile systems capable of performing one or multiple biomedical tasks. When single MNMs self-assemble into coordinated swarms, either under external control or triggered by chemical reactions, they offer advantages that individual MNMs cannot achieve. These benefits include intelligent multitasking and adaptability to changes in the surrounding environment. Here, we provide our perspective on the evolution of MNMs, beginning with the development of enzymatic MNMs since the first theoretical model was proposed in 2005. These enzymatic MNMs hold immense promise in biomedicine due to their advantages in biocompatibility and fuel availability. Subsequently, we introduce the design and application of single motors in biomedicine, followed by the control of MNM swarms and their biomedical applications. In the end, we propose viable solutions for advancing the development of MNM swarms and anticipate valuable insights into the creation of more intelligent and controllable MNM swarms for biomedical applications.; Micro/nanomotor swarms propelled by diverse mechanisms.

JTD Keywords: Active particles, Actuation, Behaviors, Biocompatibility, Biomedical applications, Coordination reactions, Design and application, Diffusion, External control, Medical applications, Micromotors, Motion, Nanomotors, Powered nanomotors, Propulsion, Self-assemble, Surrounding environment, Theoretical modeling, Versatile system, Viable solutions

Applications of sodium alginate (Alg) and polyacrylic acid (PAA) hydrogels in biomedicine are well-known. These are predefined by the strength and weakness of their properties, which in turn depend on the chemical structure and the architecture of their crosslinks. In this work, Alg biopolymer has been grafted to synthetic PAA that has been chemically crosslinked using N,N '-methylene-bisacrylamide (MBA) to produce a pH responsive hydrogel with adhesive property. The double crosslinking network, which combines MBA-mediated covalent crosslinks and ionic crosslinks in Alg domains, results in an elastic modulus that resembles that of highly anisotropic and viscoelastic human skin. After addressing the influence of the dual network onto the Alg-g-PAA hydrogel properties, a prospection of its potential as an adhesive has been made considering different surfaces (rubber, paper steel, porcine skin, etc). The bonding energy onto porcine skin, 32.6 +/- 4.6 J/m2, revealed that the Alg-g-PAA hydrogel can be proposed in the biomedical field as tissue adhesive for wound healing applications. Finally, the hydrogel has been semi-interpenetrated with poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PEDOT-MeOH) chains through a chemical oxidative polymerization process. The resulting hydrogel, Alg-g- PAA/PEDOT-MeOH, which is even more porous than Alg-g-PAA, in addition to being electro-responsive, maintains adhesive properties.

JTD Keywords: Adhesion properties, Adhesion properties,biomedical applications,bonding energy,dual network,conducting hydrogel, Adhesive properties, Adhesives, Biomedical applications, Biopolymers, Bonding energies, Bonding energy, Chemical bonds, Conducting hydrogels, Crosslinking, Dual network, Hydrogels, Medical applications, Methylenebisacrylamide, Poly(acrylic acid), Porcine skin, Property, Rational design,film, Sodium alginate

Background: Early detection of postoperative complications after colorectal cancer (CRC) surgery is associated with improved outcomes. The aim was to investigate early metabolomics signatures capable to detect patients at risk for severe postoperative complications after CRC surgery. Materials and methods: Prospective cohort study of patients undergoing CRC surgery from 2015 to 2018. Plasma samples were collected before and after surgery, and analyzed by mass spectrometry obtaining 188 metabolites and 21 ratios. Postoperative complications were registered with Clavien-Dindo Classification and Comprehensive Complication Index. Results: One hundred forty-six patients were included. Surgery substantially modified metabolome and metabolic changes after surgery were quantitatively associated with the severity of postoperative complications. The strongest positive relationship with both Clavien-Dindo and Comprehensive Complication Index (beta=4.09 and 63.05, P<0.001) corresponded to kynurenine/tryptophan, against an inverse relationship with lysophosphatidylcholines (LPCs) and phosphatidylcholines (PCs). Patients with LPC18:2/PCa36:2 below the cut-off 0.084 mu M/mu M resulted in a sevenfold higher risk of major complications (OR=7.38, 95% CI: 2.82-21.25, P<0.001), while kynurenine/tryptophan above 0.067 mu M/mu M a ninefold (OR=9.35, 95% CI: 3.03-32.66, P<0.001). Hexadecanoylcarnitine below 0.093 mu M displayed a 12-fold higher risk of anastomotic leakage-related complications (OR=11.99, 95% CI: 2.62-80.79, P=0.004). Conclusion: Surgery-induced phospholipids and amino acid dysregulation is associated with the severity of postoperative complications after CRC surgery, including anastomotic leakage-related outcomes. The authors provide quantitative insight on metabolic markers, measuring vulnerability to postoperative morbidity that might help guide early decision-making and improve surgical outcomes.

JTD Keywords: Acids, Anastomotic leakage, Bypass, Clinical-practice guidelines, Colon, Colorectal cancer, Metabolomics, Postoperative complications, Predict, Sepsis, Trauma, Tryptophan degradation

Malaria, caused by different species of protists of the genus Plasmodium, remains among the most common causes of death due to parasitic diseases worldwide, mainly for children aged under 5. One of the main obstacles to malaria eradication is the speed with which the pathogen evolves resistance to the drug schemes developed against it. For this reason, it remains urgent to find innovative therapeutic strategies offering sufficient specificity against the parasite to minimize resistance evolution and drug side effects. In this context, nanotechnology-based approaches are now being explored for their use as antimalarial drug delivery platforms due to the wide range of advantages and tuneable properties that they offer. However, major challenges remain to be addressed to provide a cost-efficient and targeted therapeutic strategy contributing to malaria eradication. The present work contains a systematic review of nanotechnology-based antimalarial drug delivery systems generated during the last 10 years. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease

JTD Keywords: Adjuvant system, Antimalarial activities, Antimalarial agent, Antimalarial drug, Antimalarial drugs, Antimalarials, Artemisinin resistance, Causes of death, Child, Controlled drug delivery, Diseases, Drug delivery system, Drug delivery systems, Drug interactions, Drug side-effects, Drug-delivery, Experimental modelling, Heparan-sulfate, Human, Humans, In-vitro, Malaria, Malaria vaccine, Mannosylated liposomes, Medical nanotechnology, Models, theoretical, Nanocarriers, Nanomedicine, Nanotechnology, Parasite-, Parasitics, Plasmodium, Plasmodium-falciparum malaria, Red-blood-cells, Targeted delivery, Targeted drug delivery, Theoretical model, Therapeutic strategy

Human mesenchymal stromal cells (hMSCs) seeded on calcium phosphate (CaP) bioceramics are extensively explored in bone tissue engineering and have recently shown effective clinical outcomes. In previous pre-clinical studies, hMSCs-CaP-mediated bone formation was preceded by osteoclastogenesis at the implantation site. The current study evaluates to what extent phase composition of CaPs affects the osteoclast response and ultimately influence bone formation. To this end, four different CaP bioceramics were used, hydroxyapatite (HA), beta-tricalcium phosphate (beta-TCP) and two biphasic composites of HA/beta- TCP ratios of 60/40 and 20/80 respectively, for in vitro osteoclast differentiation and correlation with in vivo osteoclastogenesis and bone formation. All ceramics allowed osteoclast formation in vitro from mouse and human precursors, except for pure HA, which significantly impaired their maturation. Ectopic implantation alongside hMSCs in subcutis sites of nude mice revealed new bone formation at 8 weeks in all conditions with relative amounts for beta-TCP > biphasic CaPs > HA. Surprisingly, while hMSCs were essential for osteoinduction, their survival did not correlate with bone formation. By contrast, the degree of early osteoclastogenesis (2 weeks) seemed to define the extent of subsequent bone formation. Together, our findings suggest that the osteoclastic response could be used as a predictive marker in hMSC-CaPbased bone regeneration and strengthens the need to understand the underlying mechanisms for future biomaterial development. Statement of significance The combination of mesenchymal stromal cells (MSCs) and calcium phosphate (CaP) materials has demonstrated its safety and efficacy for bone regeneration in clinical trials, despite our insufficient understanding of the underlying biological mechanisms. Osteoclasts were previously suggested as key mediators between the early inflammatory phase following biomaterial implantation and the subsequent bone formation. Here we compared the affinity of osteoclasts for various CaP materials with different ratios of hydroxyapatite to beta-tricalcium phosphate. We found that osteoclast formation, both in vitro and at early stages in vivo, correlates with bone formation when the materials were implanted alongside MSCs in mice. Surprisingly, MSC survival did not correlate with bone formation, suggesting that the number or phenotype of osteoclasts formed was more important. (c) 2024 The Author(s). Published by Elsevier Ltd on behalf of Acta Materialia Inc. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ )

JTD Keywords: Acid phosphatase tartrate resistant isoenzyme, Animal, Animal cell, Animal experiment, Animal tissue, Animals, Article, Beta-tricalcium phosphate, Bioceramics, Biocompatible materials, Biomaterial, Bone, Bone development, Bone formation, Bone regeneration, Calcium phosphate, Calcium phosphate materials, Calcium phosphates, Cd14 antigen, Cell differentiation, Cell engineering, Cell maturation, Cell survival, Ceramics, Chemical composition, Controlled study, Correlation analysis, Correlation coefficient, Data correlation, Durapatite, Engraftment, Flowcharting, Human, Human cell, Human mesenchymal stromal cell, Human mesenchymal stromal cells, Humans, Hydroxyapatite, Hydroxyapatites, In vitro study, In vivo study, In-vitro, In-vivo, Mammals, Marrow stromal cells, Material composition, Material compositions, Mesenchymal stroma cell, Mesenchymal stromal cells, Mice, Mice, nude, Monocyte, Mouse, Nonhuman, Nude mouse, Ossification, Osteoclast, Osteoclastogenesis, Osteoclasts, Osteogenesis, Osteoinduction, Phase composition, Regeneration strategies, Resorption, Scaffolds, Stem-cells, Subcutaneous tissue, Tissue engineering, Transmission control protocol, Tri-calcium phosphates, Vimentin

Polypropylene (PP), thermoplastic polyurethane (TPU), polyethylene terephthalate glycol (PETG) and polylactic acid (PLA) 3D printed specimens, which are intrinsically non-electroresponsive materials, have been converted into electroresponsive electrodes applying a low-pressure oxygen plasma treatment. After complete chemical, morphological and electrochemical characterization, plasma treated samples have been applied as integrated electrochemical sensors for detecting dopamine and serotonin by cyclic voltammetry and chronoamperometry. Results show differences in the sensing behavior, which have been explained on the basis of the chemical structure of the pristine materials. While plasma treated PLA exhibits the highest performance as electrochemical sensor in terms of sensitivity (lowest limits of detection and quantification) and selectivity (against uric acid and ascorbic acid as interfering substances), plasma treated PP displays the poorest behavior due to its low polarity compared to PLA 3D-printed electrodes. Instead, plasma treated TPU and PETG shows a very good response, much closer to PLA, as sensitive electrodes towards neurotransmitter molecules (dopamine and serotonin). Overall, results open a new door for the fabrication of electrochemical conductive sensors using intrinsically insulating materials, without the need of chemical functionalization processes.

JTD Keywords: 3d printing, Amines, Ascorbic acid, Chemical characterization, Cyclic voltammetry, Dopamine, Electrochemical characterizations, Electrochemical sensor s, Electrochemical sensors, Electrode materials, Electroresponsive materials, Low-pressure oxygen-plasma treatments, Morphological characterization, Multiwalled carbon nanotubes (mwcn), Neurophysiology, Oxygen, Oxygen plasmas, Plastic bottles, Polyethylene terephthalate glycol, Polyethylene terephthalate glycols, Polyethylene terephthalates, Polylact i c acid, Polylactic acid, Polylactic acid pla, Polyols, Polypropylene, Polypropylene oxides, Polypropylenes, Polyurethanes, Reinforced plastics, Supercapacitors, Thermoplast i c polyurethane, Thermoplastic polyurethane, Thermoplastic polyurethanes

Microbial biofilms are complex three-dimensional structures where sessile microbes are embedded in a polymeric extracellular matrix. Their resistance toward the host immune system as well as to a diverse range of antimicrobial treatments poses a serious health and development threat, being in the top 10 global public health threats declared by the World Health Organization. In an effort to combat biofilm-related microbial infections, several strategies have been developed to independently eliminate biofilms or to complement conventional antibiotic therapies. However, their limitations leave room for other treatment alternatives, where the application of nanotechnology to biofilm eradication has gained significant relevance in recent years. Their small size, penetration efficiency, and the design flexibility that they present makes them a promising alternative for biofilm infection treatment, although they also present set-backs. This review aims to describe the main possibilities and limitations of nanomedicine against biofilms, while covering the main aspects of biofilm formation and study, and the current therapies for biofilm treatment. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

JTD Keywords: Anti-bacterial agents, Anti-infective agents, Antiinfective agent, Antimicrobial, Antimicrobials, Antimicrobials,bacteria,biofilm,infectious diseases,microorganism, Bacteria, Biofilm, Biofilm infections, Biofilms, Complex three dimensional structures, Diseases, Diverse range, Drug-delivery systems,in-vitro,cellular toxicity,nanoparticles,penetration,model,biocompatibility,perspectives,hyperthermia,diagnosi, Extracellular matrices, Global public health, Health risks, Infectious disease, Infectious diseases, Medical nanotechnology, Microbial biofilm, Microorganisms, Nanomedicine, Polymer, Polymers, Regulatory issues, Roadmap

Tissue engineering holds great promise for biomedical research and healthcare, offering alternatives to animal models and enabling tissue regeneration and organ transplantation. Three-dimensional (3D) bioprinting stands out for its design flexibility and reproducibility. Here, we present an integrated fluorescent light sheet bioprinting and imaging system that combines high printing speed (0.66 mm3 /s) and resolution (9 μm) with light sheet-based imaging. This approach employs direct laser patterning and a static light sheet for confined voxel crosslinking in photocrosslinkable materials. The developed bioprinter enables real-time monitoring of hydrogel crosslinking using fluorescent recovery after photobleaching (FRAP) and brightfield imaging as well as in situ light sheet imaging of cells. Human fibroblasts encapsulated in a thiol-ene click chemistry-based hydrogel exhibited high viability (83% ± 4.34%) and functionality. Furthermore, full-thickness skin constructs displayed characteristics of both epidermal and dermal layers and remained viable for 41 days. The integrated approach demonstrates the capabilities of light sheet bioprinting, offering high speed, resolution, and real-time characterization. Future enhancements involving solid-state laser scanning devices such as acousto-optic deflectors and modulators will further enhance resolution and speed, opening new opportunities in light-based bioprinting and advancing tissue engineering. This article is protected by copyright. All rights reserved.This article is protected by copyright. All rights reserved.

JTD Keywords: cadherin, collagen, culture, differentiation, fluorescence microscopy, full-thickness skin model, hydrogels, light sheet bioprinter, light sheet fluorescence microscopy, proliferation, survival, tissue engineering, Animal, Animals, Biofabrication, Bioprinting, Cell culture, Crosslinking, Fluorescence, Fluorescence microscopy, Full-thickness skin model, Hair follicle, Human, Humans, Hydrogel, Hydrogels, Image resolution, Laser patterning, Light sheet, Light sheet bioprinter, Light sheet fluorescence microscopy, Molecular biology, Photobleaching, Printing, three-dimensional, Procedures, Reproducibility, Reproducibility of results, Skin model, Three dimensional printing, Tissue, Tissue engineering, Tissue regeneration, Tissue scaffolds, Tissues engineerings

Polarized hydroxyapatite (p-HAp) has been used as a catalyst for the synthesis of urea coupling N-2, CO2 and water under mild reaction conditions when compared to classical nitrogen fixation reactions, such as the Haber-Bosch process. The reaction of 3 bar of N-2 and 3 bar of CO2 under UV illumination at 120 degrees C (for 48 h) results in a urea yield of 1.5 +/- 0.1 mmol per gram of catalyst (g(c)) with a selectivity close to 80%, whereas the reaction is not successful without UV irradiation. However, the addition of small amounts of NO (314 ppm) produces 15.2 +/- 0.6 and 4.6 +/- 0.4 mmol g(c)(-1) with and without UV illumination, respectively, with the selectivity in both cases being close to 100%. As nitrogen fixation without UV irradiation using p-HAp as a catalyst is a challenge, studies with NO have been conducted varying the reaction conditions (time, pressure and temperature). The results suggest a mechanism based on the production of NH4+ through the oxidation of N-2.

JTD Keywords: Carbon dioxide, Carbon,dinitrogen,reduction,nitrogen,ammonia,dioxid, Catalyst selectivity, Condition, Haber-bosch process, Hydroxyapatite, Irradiation, Metabolism, Mild reaction conditions, Nitrogen fixation, Pressure and temperature, Reaction conditions, Time pressures, Time-temperature, Urea, Uv illuminations, Without uv irradiations, ]+ catalyst

Factor XII (FXII) is a zymogen present in blood that tends to adsorb onto the surfaces of blood-contacting medical devices. Once adsorbed, it becomes activated, initiating a cascade of enzymatic reactions that lead to surface-induced coagulation. This process is characterized by multiple redundancies, making it extremely challenging to prevent clot formation and preserve the properties of the surface. In this study, a novel modulatory coating system based on C1-esterase inhibitor (C1INH) functionalized polymer brushes, which effectively regulates the activation of FXII is proposed. Using surface plasmon resonance it is demonstrated that this coating system effectively repels blood plasma proteins, including FXII, while exhibiting high activity against activated FXII and plasma kallikrein under physiological conditions. This unique property enables the modulation of FXII activation without interfering with the overall hemostasis process. Furthermore, through dynamic Chandler loop studies, it is shown that this coating significantly improves the hemocompatibility of polymeric surfaces commonly used in medical devices. By addressing the root cause of contact activation, the synergistic interplay between the antifouling polymer brushes and the modulatory C1INH is expected to lay the foundation to enhance the hemocompatibility of medical device surfaces.© 2023 The Authors. Macromolecular Bioscience published by Wiley-VCH GmbH.

JTD Keywords: adsorption, binding, c1-esterase-inhibitor, coatings, contact activation, factor-xii, fxii activation, hemocompatibility, hemocompatible surface modification, heparin, polymer brushes, system, thrombosis, Adsorption, Anticoagulation, Antifouling agent, Article, Beta-fxiia, Biocompatibility, Blood, Blood clotting, Blood clotting factor 12, Blood clotting factor 12a, Blood clotting factor 12a inhibitor, Blood coagulation, C1-esterase-inhibitor, Cell activation, Chemical activation, Coagulation, Coating (procedure), Complement component c1s inhibitor, Complement system, Controlled study, Dendrimers, Enzyme immobilization, Enzymes, Erythrocyte, Esters, Factor xii, Factor xii activation, Factor xiia, Fibrin deposition, Functional polymers, Fxii activation, Haemocompatibility, Hemocompatibility, Hemocompatible surface modification, Hemostasis, Heparin, Human, Hydrogel, Medical devices, Metabolism, Plasma kallikrein, Plasma protein, Plastic coatings, Platelet count, Polymer, Polymer brushes, Polymerization, Polymers, Property, Root cause, Surface plasmon resonance, Surface property, Surface reactions, Surface-modification, Thrombocyte adhesion, Β-fxiia

A new generation of fully bioresorbable metallic Zn-based alloys could be used for stenting applications; however, the initial surface degradation delays stent re-endothelialization. Thus, this work proposes a dual strategy to control the corrosion and accelerate the endothelialization of ZnMg and ZnAg biodegradable alloys. First, a stable polycaprolactone (PCL) coating is obtained and followed by its functionalization with either linear RGD (Arg-Gly-Asp) or REDV (Arg-Glu-Asp-Val) peptides or a dual peptide-based platform combining both sequences (RGD-REDV). Scratching tests showed neither delamination nor detachment of the polymeric coating. Potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) measurements confirmed the corrosion resistance after PCL coating by revealing lower current density and higher absolute impedance values. X-ray photoelectron spectroscopy (XPS) and fluorescent microscopy confirmed the correct peptide immobilization onto PCL coated Zn alloys. The functionalized samples exhibited enhanced human umbilical vein endothelial cells (HUVEC) adhesion. The higher number of adhered cells to the functionalized surfaces with the RGD-REDV platform demonstrates the synergistic effect of combining both RGD and REDV sequences. Higher corrosion resistance together with enhanced endothelialization indicates that the dual functionalization of Zn alloys with PCL and peptide-based RGD-REDV platform holds great potential to overcome the clinical limitations of current biodegradable metal stents.

JTD Keywords: Binary alloys, Biodegradable metals, Bioresorbable, Cardiovascular applications, Cell adhesive peptides, Corrosion, Corrosion resistance, Corrosion resistant alloys, Corrosion resistant coatings, Degradation, Dual peptide-based platform, Electrochemical corrosion, Electrochemical impedance spectroscopy, Endothelial cells, Endothelialization, Functionalization, Functionalizations, In-vitro, Magnesium alloys, Metallics, Mg alloy, Peptides, Polycaprolactone coating, Polymer-coatings, Rgd-functionalization, Silver alloys, Stents, Surface, X ray photoelectron spectroscopy, Zinc, Zinc alloys, Zn alloys, Zn-based alloys

Interactions between living cells and nanoparticles are extensively studied to enhance the delivery of therapeutics. Nanoparticles size, shape, stiffness, and surface charge are regarded as the main features able to control the fate of cell-nanoparticle interactions. However, the clinical translation of nanotherapies has so far been limited, and there is a need to better understand the biology of cell-nanoparticle interactions. This study investigates the role of cellular mechanosensitive components in cell-nanoparticle interactions. It is demonstrated that the genetic and pharmacologic inhibition of yes-associated protein (YAP), a key component of cancer cell mechanosensing apparatus and Hippo pathway effector, improves nanoparticle internalization in triple-negative breast cancer cells regardless of nanoparticle properties or substrate characteristics. This process occurs through YAP-dependent regulation of endocytic pathways, cell mechanics, and membrane organization. Hence, the study proposes targeting YAP may sensitize triple-negative breast cancer cells to chemotherapy and increase the selectivity of nanotherapy.© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.

JTD Keywords: cancer treatment, cells, differentiation, hippo pathway, mechanics, mechanobiology, mechanotransduction, nanoparticles, progression, protein, resistance, yap-signaling, yap/taz, Adaptor proteins, signal transducing, Bio-nano interaction, Bio-nano interactions, Breast cancer cells, Cancer cells, Cancer treatment, Cells, Cellular therapeutics, Cellular uptake, Chemotherapy, Cytology, Diseases, Extracellular-matrix, Human, Humans, Mechano-biology, Mechanobiology, Metabolism, Nanoparticle, Nanoparticle interaction, Nanoparticles, Physiology, Protein serine threonine kinase, Protein serine-threonine kinases, Protein signaling, Signal transducing adaptor protein, Signal transduction, Therapeutic effects, Triple negative breast cancer, Triple negative breast neoplasms, Triple-negative breast cancers, Yap-signaling, Yap-signaling proteins, Yes-associated protein-signaling

The accurate spatial segregation into distinct phases within cell membranes coordinates vital biochemical processes and functionalities in living organisms. One of nature's strategies to localize reactivity is the formation of dynamic raft domains. Most raft models rely on liquid-ordered L-0 phases in a liquid-disordered L-d phase lacking correlation and remaining static, often necessitating external agents for phase separation. Here, we introduce a synthetic system of bicomponent glycodendrimersomes coassembled from Janus dendrimers and Janus glycodendrimers (JGDs), where lactose-lactose interactions exclusively drive lateral organization. This mechanism results in modulated phases across two length scales, yielding raft-like microdomains featuring nanoarrays at the nanoscale. By varying the density of lactose and molecular architecture of JGDs, the nanoarray type and size, shape, and spacing of the domains were controlled. Our findings offer insight into the potential primordial origins of rudimentary raft domains and highlight the crucial role of glycans within the glycocalyx.

JTD Keywords: Article, Artificial cells, Atomic force microscopy, Bicomponents, Bilayer, Bilayer membrane, Biochemical functionality, Biochemical process, Biological-membranes, Cell component, Cell membrane, Cellular parameters, Chemical interaction, Chemical structure, Chemistry, Cytology, Defined janus glycodendrimers, Dehydration, Dendrimer, Dendrimers, Dilution, Dimer, External agents, Fourier transform, Giant vesicles, Glycan, Glycans, Glycocalyx, Glycodendrimers, Janus dendrimer, Janus glycodendrimer, Lactose, Lateral organization, Lectin, Lipid rafts, Living organisms, Membrane damage, Membrane microdomain, Membrane microdomains, Membrane structure, Metabolism, Modulated phases, Molecule, Monomer, Nanoarrays, Oligosaccharide, Organization, Periodicity, Phase separation, Phase-separation, Phospholipids, Polysaccharide, Polysaccharides, Raft like domain, Relative humidity, Spatial segregation, Structure analysis, Sugars, Synthetic systems, Tetramer, Unclassified drug, Unilamellar vesicles, Water

Human pluripotent stem cell -derived kidney organoids offer unprecedented opportunities for studying polycystic kidney disease (PKD), which still has no effective cure. Here, we developed both in vitro and in vivo organoid models of PKD that manifested tubular injury and aberrant upregulation of renin-angiotensin aldosterone system. Single -cell analysis revealed that a myriad of metabolic changes occurred during cystogenesis, including defective autophagy. Experimental activation of autophagy via ATG5 overexpression or primary cilia ablation significantly inhibited cystogenesis in PKD kidney organoids. Employing the organoid xenograft model of PKD, which spontaneously developed tubular cysts, we demonstrate that minoxidil, a potent autophagy activator and an FDA -approved drug, effectively attenuated cyst formation in vivo. This in vivo organoid model of PKD will enhance our capability to discover novel disease mechanisms and validate candidate drugs for clinical translation.

JTD Keywords: Adenylate kinase, Adult, Animal cell, Animal experiment, Animal model, Animal tissue, Article, Autophagosome, Autophagy, Autophagy (cellular), Autosomal-dominant, Calcium homeostasis, Cilia, Cilium, Cohort analysis, Controlled study, Cyclic amp, Disease, Dominant polycystic kidney, Enzyme linked immunosorbent assay, Epithelium, Exon, Expression, Female, Food and drug administration, Framework, Generation, Growth, Hepatitis a virus cellular receptor 1, Human, Human cell, Humans, Immunohistochemistry, In vitro study, In vivo study, Kidney, Kidney organoid, Kidney polycystic disease, Male, Minoxidil, Mouse, Mutations, Nonhuman, Organoid, Organoids, Platelet derived growth factor beta receptor, Pluripotent stem-cells, Polycystic kidney diseases, Protein kinase lkb1, Renin, Sequestosome 1, Single cell analysis, Single cell rna seq, Small nuclear rna, Tunel assay, Upregulation, Western blotting, Whole exome sequencing

Surface electromyography (sEMG) can be used to measure the electrical activity of the respiratory muscles. The possible applications of sEMG span from patients suffering from acute respiratory failure to patients receiving chronic home mechanical ventilation, to evaluate muscle function, titrate ventilatory support and guide treatment. However, sEMG is mainly used as a monitoring tool for research and its use in clinical practice is still limited-in part due to a lack of standardization and transparent reporting. During this round table meeting, recommendations on data acquisition, processing, interpretation, and potential clinical applications of respiratory sEMG were discussed. This paper informs the clinical researcher interested in respiratory muscle monitoring about the current state of the art on sEMG, knowledge gaps and potential future applications for patients with respiratory failure.

JTD Keywords: Acute respiratory failure, Artificial ventilation, Asthmatic-children, Breathing muscle, Clinical monitoring, Clinical practice, Clinical research, Consensus development, Data interpretation, Disease exacerbation, Drive, Electrode positioning, Electrode removal, Electromyography, Force, Home care, Human, Human diaphragm, Humans, Information processing, Inspiratory muscle training, Inspiratory muscles, Intensive care unit, Knowledge gap, Long term care, Mechanical ventilation, Medical procedures, Muscle contraction, Muscle fatigue, Muscle function, Muscle training, Muscle, skeletal, Muscle-activity, Noninvasive ventilation, Patient monitoring, Patient-ventilator asynchrony, Physiology, Prognosis, Quality of life, Reporting and data system, Respiratory failure, Respiratory muscles, Review, Severe exacerbations, Signal processing, Skeletal muscle, Standardization, Surface electromyography, Time factor

Hydroxyapatite-based materials have been widely used in countless applications, such as bone regeneration, catalysis, air and water purification or protein separation. Recently, much interest has been given to controlling the aspect ratio of hydroxyapatite crystals from bulk samples. The ability to exert control over the aspect ratio may revolutionize the applications of these materials towards new functional materials. Controlling the shape, size and orientation of HA crystals allows obtaining high aspect ratio structures, improving several key properties of HA materials such as molecule adsorption, ion exchange, catalytic reactions, and even overcoming the well-known brittleness of ceramic materials. Regulating the morphogenesis of HA crystals to form elongated oriented fibres has led to flexible inorganic synthetic sponges, aerogels, membranes, papers, among others, with applications in sustainability, energy and catalysis, and especially in the biomedical field.; Hydroxyapatite-based materials have been widely used in countless applications, such as bone regeneration, catalysis, air and water purification or protein separation.

JTD Keywords: Bone, Calcium-phosphate, Doped hydroxyapatite, Fire-resistant, Hydrothermal synthesis, Metal-ions, Nanoparticles, Nanowires, Particle-size, Porous nanocomposite

The sensitivity of NMR may be enhanced by more than four orders of magnitude via dissolution dynamic nuclear polarization (dDNP), potentially allowing real-time, in situ analysis of chemical reactions. However, there has been no widespread use of the technique for this application and the major limitation has been the low experimental throughput caused by the time-consuming polarization build-up process at cryogenic temperatures and fast decay of the hyper-intense signal post dissolution. To overcome this limitation, we have developed a microfluidic device compatible with dDNP-MR spectroscopic imaging methods for detection of reactants and products in chemical reactions in which up to 8 reactions can be measured simultaneously using a single dDNP sample. Multiple MR spectroscopic data sets can be generated under the same exact conditions of hyperpolarized solute polarization, concentration, pH, and temperature. A proof-of-concept for the technology is demonstrated by identifying the reactants in the decarboxylation of pyruvate via hydrogen peroxide (e.g. 2-hydroperoxy-2-hydroxypropanoate, peroxymonocarbonate and CO2). dDNP-MR allows tracing of fast chemical reactions that would be barely detectable at thermal equilibrium by MR. We envisage that dDNP-MR spectroscopic imaging combined with microfluidics will provide a new high-throughput method for dDNP enhanced MR analysis of multiple components in chemical reactions and for non-destructive in situ metabolic analysis of hyperpolarized substrates in biological samples for laboratory and preclinical research.

JTD Keywords: injections, nmr, pyruvate, Polarization

Herein, an innovative self- and pressure-adhesive biomedical implant was developed. Tissue adhesion was achieved with a thermosensitive hydrogel based on poly-(N-isopropylacrylamide-co-acrylamide), PNIPAAm-co-PAAm, grafted on a substrate composed of knitted fibers of isotactic polypropylene mesh (PP), used as surgical mesh implants. The in vitro studies, carried out with porcine skin, showed an important role of the inclusion of acrylamide-based comonomer (AAm) in the thermosensitive hydrogel PNIPAAm matrix. The bonding, peeling, and shearing energies obtained for PNIPAAm-co-PAAm increased exponentially up to three, two, and six times, respectively, compared to the gel without AAm. The physisorption and mechanical interlocking mechanisms are responsible for such improvement due to the simultaneous creation of hydrophobic and hydrophilic interactions of the thermosensitive hydrogel at temperatures higher than the lower critical solution temperature (LCST), with the porcine tissue. In addition, our bioadhesives present excellent interfacial toughness (similar to 100 J/m(2)) when compared to commercial bioglues (similar to 50 J/m(2) or lower). The results obtained represent a very promising adhesive material that is extensible to other medical devices that require atraumatic fixation to avoid chronic pain related to other fixation approaches.

JTD Keywords: Bioadhesive, Complications, Hernia-repair, Interface adhesion, Mechanicalinterlocking, Physisorption, Poly(n-isopropylacrylamide), Polypropylene mesh, Surgicalmesh, Thermosensitive hydrogel

The Boston keratoprosthesis (BKPro) is a medical device used to restore vision in complicated cases of corneal blindness. This device is composed by a front plate of polymethylmethacrylate (PMMA) and a backplate usually made of titanium (Ti). Ti is an excellent biomaterial with numerous applications, although there are not many studies that address its interaction with ocular cells. In this regard, despite the good retention rates of the BKPro, two main complications compromise patients' vision and the viability of the prosthesis: imperfect adhesion of the corneal tissue to the upside of the backplate and infections. Thus, in this work, two topographies (smooth and rough) were generated on Ti samples and tested with or without functionalization with a dual peptide platform. This molecule consists of a branched structure that links two peptide moieties to address the main complications associated with BKPro: the well-known RGD peptide in its cyclic version (cRGD) as cell pro-adherent motif and the first 11 residues of lactoferrin (LF1-11) as antibacterial motif. Samples were physicochemically characterized, and their biological response was evaluated in vitro with human corneal keratocytes (HCKs) and against the gram-negative bacterial strain Pseudomonas aeruginosa. The physicochemical characterization allowed to verify the functionalization in a qualitative and quantitative manner. A higher amount of peptide was anchored to the rough surfaces. The studies performed using HCKs showed increased long-term proliferation on the functionalized samples. Gene expression was affected by topography and peptide functionalization. Roughness promoted α-smooth muscle actin (α-SMA) overexpression, and the coating notably increased the expression of extracellular matrix components (ECM). Such changes may favour the development of unwanted fibrosis, and thus, corneal haze. In contrast, the combination of the coating with a rough topography decreased the expression of α-SMA and ECM components, which would be desirable for the long-term success of the prosthesis. Regarding the antibacterial activity, the functionalized smooth and rough surfaces promoted the death of bacteria, as well as a perturbation in their wall definition and cellular morphology. Bacterial killing values were 58 % for smooth functionalised and 68 % for rough functionalised samples. In summary, this study suggests that the use of the dual peptide platform with cRGD and LF1-11 could be a good strategy to improve the in vitro and in vivo performance of the rough topography used in the commercial BKPro.Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.

JTD Keywords: binding, corneal blindness, differentiation, dual coating, iii collagen, in-vitro, infectious endophthalmitis, keratocyte, myofibroblast, peptide platform, proliferation, surface-roughness, titanium implant, Boston keratoprostheses, Corneal blindness, Dual coating, Gram-negative bacteria, Peptide platform, Titanium implant

Antibodies are highly selective and sensitive, making them the gold standard for recognition affinity tools. However, their production cost is high and their downstream processing is time-consuming. Molecularly imprinted polymers (MIPs) are tailor-made by incorporating specific molecular recognition sites in their structure, thus translating into receptor-like activity mode of action. The interest in molecular imprinting technology, applied to biomacromolecules, has increased in the past decade. MIPs, produced using biomolecules as templates, commonly referred to as "plastic antibodies" or "artificial receptors", have been considered as suitable cheaper and easy to produce alternatives to antibodies. Research on MIPs, designed to recognize proteins or peptides is particularly important, with potential contributions towards biomedical applications, namely biosensors and targeted drug delivery systems. This mini review will cover recent advances on (bio)molecular imprinting technology, where proteins or peptides are targeted or mimicked for sensing and therapeutic applications. Polymerization methods are reviewed elsewhere, being out of the scope of this review. Template selection and immobilization approaches, monomers and applications will be discussed, highlighting possible drawbacks and gaps in research.Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.

JTD Keywords: artificial antibodies, assay, biomimetics, biomolecules, biosensors, delivery, diagnostics, drug delivery, electrochemical detection, nanoparticles, receptors, science-and-technology, selective recognition, selective targeting, separation, templates, Artificial antibodies, Biomimetics, Biomolecules, Biosensors, Diagnostics, Drug delivery, Molecularly imprinted polymers, Nanoparticles, Selective targeting, Solid-phase synthesis

Recent experimental evidence indicates a role for the intermediate filament vimentin in regulating cellular mechanical homeostasis, but its precise contribution remains to be discovered. Mechanical homeostasis requires a balanced bi-directional interplay between the cell's microenvironment and the cellular morphological and mechanical state-this balance being regulated via processes of mechanotransduction and mechanoresponse, commonly referred to as mechanoreciprocity. Here, we systematically analyze vimentin-expressing and vimentin-depleted cells in a swatch of in vitro cellular microenvironments varying in stiffness and/or ECM density. We find that vimentin-expressing cells maintain mechanical homeostasis by adapting cellular morphology and mechanics to micromechanical changes in the microenvironment. However, vimentin-depleted cells lose this mechanoresponse ability on short timescales, only to reacquire it on longer time scales. Indeed, we find that the morphology and mechanics of vimentin-depleted cell in stiffened microenvironmental conditions can get restored to the homeostatic levels of vimentin-expressing cells. Additionally, we observed vimentin-depleted cells increasing collagen matrix synthesis and its crosslinking, a phenomenon which is known to increase matrix stiffness, and which we now hypothesize to be a cellular compensation mechanism for the loss of vimentin. Taken together, our findings provide further insight in the regulating role of intermediate filament vimentin in mediating mechanoreciprocity and mechanical homeostasis.© 2023. The Author(s).

JTD Keywords: contributes, dynamics, focal adhesions, forces, mechanotransduction, migration, motility, organization, tissue, Intermediate-filaments

Decellularized extracellular matrix (dECM) hydrogels have emerged as promising materials in tissue engineering. The steps to produce dECM hydrogels containing the bioactive epitopes found in the native matrix are often laborious, including the initial harvesting and decellularization of the animal organ. Furthermore, resulting hydrogels often exhibit weak mechanical properties that require the use of additional crosslinkers such as genipin to truly simulate the mechanical properties of the desired study tissue. In this work, we have developed a protocol to readily obtain tens of thin dECM hydrogel cryosections attached to a glass slide as support, to serve as scaffolds for two-dimensional (2D) or three-dimensional (3D) cell culture. Following extensive atomic force microscopy (AFM)-based mechanical characterization of dECM hydrogels crosslinked with increasing genipin concentrations (5 mM, 10 mM, and 20 mM), we provide detailed protocol recommendations for achieving dECM hydrogels of any biologically relevant stiffness. Given that our protocol requires hydrogel freezing, we also confirm that the approach taken can be further used to increase the mechanical properties of the scaffold in a controlled manner exhibiting twice the stiffness in highly crosslinked arrays. Finally, we explored the effect of ethanol-based short- and long-term sterilization on dECM hydrogels, showing that in some situations it may give rise to significant changes in hydrogel mechanical properties that need to be taken into account in experimental design. The hydrogel cryosections produced were shown to be biocompatible and support cell attachment and spreading for at least 72 h in culture. In brief, our proposed method may provide several advantages for tissue engineering: (1) easy availability and reduction in preparation time, (2) increase in the total hydrogel volume eventually used for experiments being able to obtain 15-22 slides from a 250 µL hydrogel) with a (3) reduction in scaffold variability (only a 17.5 ± 9.5% intraslide variability provided by the method), and (4) compatibility with live-cell imaging techniques or further cell characterization of cells.

JTD Keywords: atomic force microscopy, cryogel, cryosectioning, decellularization, extracellular matrix, genipin, sterilization, stiffness, young's modulus, Atomic force microscopy, Cryogel, Cryosectioning, Decellularization, Extracellular matrix, Genipin, Hydrogel, Sterilization, Stiffness, Young’s modulus

General porins are nature's sieving machinery in the outer membrane of Gram-negative bacteria. Their unique hourglass-shaped architecture is highly conserved among different bacterial membrane proteins and other biological channels. These biological nanopores have been designed to protect the interior of the bacterial cell from leakage of toxic compounds while selectively allowing the entry of the molecules needed for cell growth and function. The mechanism of transport through porins is of utmost and direct interest for drug discovery, extending toward nanotechnology applications for blue energy, separations, and sequencing. Here we present a theoretical framework for analysing the filter of general porins in relation to translocating molecules with the aid of enhanced molecular simulations quantitatively. Using different electrostatic probes in the form of a series of related molecules, we describe the nature of this filter and how to finely tune permeability by exploiting electrostatic interactions between the pore and the translocating molecule. Eventually, we show how enhanced simulations constitute today a valid tool for characterising the mechanism and quantifying energetically the transport of molecules through nanopores. General porins are nature's sieving machinery in the outer membrane of Gram-negative bacteria. In the diffusive transport process of molecules, electrostatic interactions can help to decrease the entropic free energy barrier.

JTD Keywords: Channel, Diffusion barrier, Electric-field, Molecular-dynamics, Outer-membrane permeability, Permeation, Porins, Simulations, Translocation, Transport

Introducing SimpliPyTEM, a Python library and accompanying GUI that simplifies the post-acquisition evaluation of transmission electron microscopy (TEM) images, helping streamline the workflow. After an imaging session, a folder of image and/or video files, typically containing low contrast and large file size 32-bit images, can be quickly processed via SimpliPyTEM into high-quality, high-contrast.jpg images with suitably sized scale bars. The app can also generate HTML or PDF files containing the processed images for easy viewing and sharing. Additionally, SimpliPyTEM specifically focuses on in situ TEM videos, an emerging field of EM involving the study of dynamic processes whilst imaging. The package allows fast data processing into preview movies, averages, image series, or motion-corrected averages. The accompanying Python library offers many standard image processing methods, all simplified to a single command, plus a module to analyse particle morphology and population. This latter application is particularly useful for life sciences investigations. User-friendly tutorials and clear documentation are included to help guide users through the processing and analysis. We invite the EM community to contribute to and further develop this open-source package.

JTD Keywords: Image processing, computer-assisted, Microscopy, electron, transmission, Mobile applications, Software

Charge exchange is the fundamental process that sustains cellular respiration and photosynthesis by shuttling electrons in a cascade of electron transfer (ET) steps between redox cofactors. While intraprotein charge exchange is well characterized in protein complexes bearing multiple redox sites, interprotein processes are less understood due to the lack of suitable experimental approaches and the dynamic nature of the interactions. Proteins constrained between electrodes are known to support electron transport (ETp) through the protein matrix even without redox cofactors, as the charges housed by the redox sites in ET are furnished by the electrodes. However, it is unknown whether protein ETp mechanisms apply to the interprotein medium present under physiological conditions. We study interprotein charge exchange between plant photosystem I (PSI) and its soluble redox partner plastocyanin (Pc) and address the role of the Pc copper center. Using electrochemical scanning tunneling spectroscopy (ECSTS) current-distance and blinking measurements, we quantify the spatial span of charge exchange between individual Pc/PSI pairs and ETp through transient Pc/PSI complexes. Pc devoid of the redox center (Pcapo) can exchange charge with PSI at longer distances than with the copper ion (Pcholo). Conductance bursts associated with Pcapo/PSI complex formation are higher than in Pcholo/PSI. Thus, copper ions are not required for long-distance Pc/PSI ETp but regulate its spatial span and conductance. Our results suggest that the redox center that carries the charge in Pc is not necessary to exchange it in interprotein ET through the aqueous solution and question the canonical view of tight complex binding between redox protein partners.

JTD Keywords: azurin, binding, blinking, crystal-structure, cupredoxin, current distance spectroscopy, electrochemical tunneling microscopy, proteinconductance, reduction, single metalloprotein, single molecule measurements, site, spectroscopy, Blinking, Cupredoxin, Current distance spectroscopy, Electrochemical tunneling microscopy, Interprotein electron transfer, Protein conductance, Single molecule measurements, State electron-transport

The intestine is a complex tissue with a characteristic three-dimensional (3D) crypt-villus architecture, which plays a key role in the intestinal function. This function is also regulated by the intestinal stroma that actively supports the intestinal epithelium, maintaining the homeostasis of the tissue. Efforts to account for the 3D complex structure of the intestinal tissue have been focused mainly in mimicking the epithelial barrier, while solutions to include the stromal compartment are scarce and unpractical to be used in routine experiments. Here we demonstrate that by employing an optimized bioink formulation and the suitable printing parameters it is possible to produce fibroblast-laden crypt-villus structures by means of digital light projection stereolithography (DLP-SLA). This process provides excellent cell viability, accurate spatial resolution, and high printing throughput, resulting in a robust biofabrication approach that yields functional gut mucosa tissues compatible with conventional testing techniques.Copyright © 2023 Elsevier B.V. All rights reserved.

JTD Keywords: 3d microstructure, barrier, cells, epithelial-stromal interactions, gelma-pegda soft hydrogels, growth, hydrogel, intestinal mucosa model, methacrylamide, microfabrication, proliferation, scaffold, stereolithography, 3d bioprinting, 3d microstructure, Epithelial-stromal interactions, Fibroblasts, Gelma-pegda soft hydrogels, Intestinal mucosa model

In order to exploit the pharmacological potential of natural bioactive molecules with low water solubility, such as curcumin, it is necessary to develop formulations, such as amorphous polymer dispersions, which allow a constant release rate and at the same time avoid possible toxicity effects of the crystalline form of the molecule under scrutiny. In this study, polymer dispersions of curcumin were obtained in PADAS, a biodegradable semicrystalline copolymer based on 1,12-dodecanediol, sebacic acid and alanine. The dispersions were fully characterized by means of differential scanning calorimetry and broadband dielectric spectroscopy, and the drug release profile was measured in a simulated body fluid. Amorphous homogeneous binary dispersions were obtained for curcumin mass fraction between 30 and 50%. Curcumin has significantly higher glass transition temperature Tg (≈ 347 K) than the polymer matrix (≈274-277 K depending on the molecular weight), and dispersions displayed Tg's intermediate between those of the pure amorphous components, implying that curcumin acts as an effective antiplasticizer for PADAS. Dielectric spectroscopy was employed to assess the relaxation dynamics of the binary dispersion with 30 wt% curcumin, as well as that of each (amorphous) component separately. The binary dispersion was characterized by a single structural relaxation, a single Johari-Goldstein process, and two local intramolecular processes, one for each component. Interestingly, the latter processes scaled with the Tg of the sample, indicating that they are viscosity-sensitive. In addition, both the pristine polymer and the dispersion exhibited an interfacial Maxwell-Wagner relaxation, likely due to spatial heterogeneities associated with phase disproportionation in this polymer. The release of curcumin from the dispersion in a simulated body fluid followed a Fickian diffusion profile, and 51% of the initial curcumin content was released in 48 h.Copyright © 2023. Published by Elsevier B.V.

JTD Keywords: antioxidant, bioavailability, dielectric spectroscopy, domain havriliak-negami, glass transition temperature, kinetic stability, molecular mobility, nm pores, phase-behavior, physical stability, release kinetics, temperature, thermodynamic quantities, time, Amorphous formulations, Dielectric spectroscopy, Glass transition temperature, Kinetic stability, Kohlrausch-williams-watts, Molecular mobility, Release kinetics

The incorporation of exogenous lactate into cardiac tissues is a regenerative strategy that is rapidly gaining attention. In this work, two polymeric platforms were designed to achieve a sustained release of lactate, combining immediate and prolonged release profiles. Both platforms contained electrospun poly(lactic acid) (PLA) fibers and an alginate (Alg) hydrogel. In the first platform, named L/K(x)/Alg-PLA, lactate and proteinase K (x mg of enzyme per 1 g of PLA) were directly loaded into the Alg hydrogel, into which PLA fibers were assembled. In the second platform, L/Alg-K(x)/PLA, fibers were produced by electrospinning a proteinase K:PLA solution and, subsequently, assembled within the lactate-loaded hydrogel. After characterizing the chemical, morphological, and mechanical properties of the systems, as well as their cytotoxicity, the release profiles of the two platforms were determined considering different amounts of proteinase K (x = 5.2, 26, and 52 mg of proteinase K per 1 g of PLA), which is known to exhibit a broad cleavage activity. The profiles obtained using L/Alg-K(x)/PLA platforms with x = 26 and 52 were the closest to the criteria that must be met for cardiac tissue regeneration. Finally, the amount of lactate directly loaded in the Alg hydrogel for immediate release and the amount of protein in the electrospinning solution were adapted to achieve a constant lactate release of around 6 mM per day over 1 or 2 weeks. In the optimized bioplatform, in which 6 mM lactate was loaded in the hydrogel, the amount of fibers was increased by a factor of x3, the amount of enzyme was adjusted to 40 mg per 1 g of PLA, and a daily lactate release of 5.9 +/- 2.7 mM over a period of 11 days was achieved. Accordingly, the engineered device fully satisfied the characteristics and requirements for heart tissue regeneration.

JTD Keywords: biodegradable fibers, cardiac tissue regeneration, cell, drug-release, elastic-modulus, electrospinning, heart, nanoindentation, plasma treatment, proteinase, scaffold, stiffness, Alginate, Alginates, Biodegradable fibers, Cardiac tissue, Cardiac tissue regeneration, Cell, Delayed-action preparations, Drug-release, Elastic-modulus, Electrospinning, Endopeptidase k, Heart, Hydrogels, Lactic acid, Nanoindentation, Plasma treatment, Poly(lactide), Polyesters, Proteinase, Regeneration, Scaffold, Skeletal-muscle, Stiffness

Highly permeable polyamide reverse osmosis (RO) membranes are desirable for reducing the energy burden and ensuring future water resources in arid and semiarid regions. One notable drawback of thin film composite (TFC) polyamide RO/NF membranes is the polyamide's sensitivity to degradation by free chlorine, the most used biocide in water purification trains. This investigation demonstrated a significant increase in the crosslinking-degree parameter by the m-phenylenediamine (MPD) chemical structure extending in the thin film nanocomposite (TFN) membrane without adding extra MPD monomers to enhance the chlorine resistance and performance. Membrane modification was carried out according to monomer ratio changes and Nanoparticle embedding into the PA layer approaches. A new class of TFN-RO membranes incorporating novel aromatic amine functionalized (AAF)-MWCNTs embedded into the polyamide (PA) layer was introduced. A purposeful strategy was carried out to use cyanuric chloride (2,4,6-trichloro-1,3,5-triazine) as an intermediate functional group in the AAF-MWCNTs. Thus, amidic nitrogen, connected to benzene rings and carbonyl groups, assembles a structure similar to the standard PA, consisting of MPD and trimesoyl chloride. The resulting AAF-MWCNTs were mixed in the aqueous phase during the interfacial polymerization to increase the susceptible positions to chlorine attack and improve the crosslinking degree in the PA network. The characterization and performance results of the membrane demonstrated an increase in ion selectivity and water flux, impressive stability of salt rejection after chlorine exposure, and improved antifouling performance. This purposeful modification resulted in overthrowing two tradeoffs; i) high crosslink density-water flux and ii) salt rejection-permeability. The modified membrane demonstrated ameliorative chlorine resistance relative to the pristine one, with twice the increase in crosslinking degree, more than four times the enhancement of the oxidation resistance, negligible reduction in the salt rejection (0.83 %), and only 5 L/m2.h flux loss following a rigorous static chlorine exposure of 500 ppm.h under acidic conditions. The excellent performance of new chlorine resistant TNF RO membranes fabricated via AAF-MWCNTs together with the facile membrane manufacturing process offered the possibility of postulating them in the desalination field, which could eventually help the current freshwater supply challenge.Copyright © 2023 Elsevier B.V. All rights reserved.

JTD Keywords: behavior, carbon nanotubes, desalination, interfacial polymerization, naclo resistance, nanocomposite, nanofiltration membrane, performance, polymerization, ro membranemodification, substrate, water, Antifouling, Desalination, Interfacial polymerization, Naclo resistance, Ro membrane modification, Thin-film composite

An unacceptably large number of newborn infants die in developing countries. For a considerable number of cases (particularly in preterm infants), morbidity and mortality can be reduced by simply maintaining newborn thermal homeostasis during the first weeks of life. Unfortunately, deaths caused by prematurity remain inordinately common in low- and middle-income countries (LMICs) due to reduced access to incubators in light of the high cost of commercially available devices. We herein describe and test a low-cost and easy-to-assemble neonatal incubator created with inexpensive materials readily available in LMICs. The incubator is based on an Arduino microcontroller. It maintains controlled temperature and relative humidity inside the main chamber while continuously measuring newborn weight progress. Moreover, the incubator has a tilting bed system and an additional independent safety temperature alarm. The performance of the novel low-cost neonatal incubator was evaluated and successfully passed the IEC 60601-2-19 standards. In the present work, we provide all the necessary technical information, which is distributed as open source. This will enable assembly of very low-cost (<250 €) and fully functional incubators in LMICs that should help reduce neonatal mortality.© 2023 The Authors. Published by Elsevier Ltd.

JTD Keywords: arduino, control systems, developing countries, low-cost, low-resource regions, noise, preterm infant, Arduino, Control systems, Developing countries, Low-cost, Low-resource regions, Mortality, Neonatal incubator, Preterm infant

Artemisinin, curcumin or quercetin, alone or in combination, were loaded in nutriosomes, special phospholipid vesicles enriched with Nutriose FM06®, a soluble dextrin with prebiotic activity, that makes these vesicles suitable for oral delivery. The resulting nutriosomes were sized between 93 and 146 nm, homogeneously dispersed, and had slightly negative zeta potential (around -8 mV). To improve their shelf life and storability over time, vesicle dispersions were freeze-dried and stored at 25 °C. Results confirmed that their main physico-chemical characteristics remained unchanged over a period of 12 months. Additionally, their size and polydispersity index did not undergo any significant variation after dilution with solutions at different pHs (1.2 and 7.0) and high ionic strength, mimicking the harsh conditions of the stomach and intestine. An in vitro study disclosed the delayed release of curcumin and quercetin from nutriosomes (∼53% at 48 h) while artemisinin was quickly released (∼100% at 48 h). Cytotoxicity assays using human colon adenocarcinoma cells (Caco-2) and human umbilical vein endothelial cells (HUVECs) proved the high biocompatibility of the prepared formulations. Finally, in vitro antimalarial activity tests, assessed against the 3D7 strain of Plasmodium falciparum, confirmed the effectiveness of nutriosomes in the delivery of curcumin and quercetin, which can be used as adjuvants in the antimalaria treatment. The efficacy of artemisinin was also confirmed but not improved. Overall results proved the possible use of these formulations as an accompanying treatment of malaria infections.Copyright © 2023. Published by Elsevier B.V.

JTD Keywords: artemisinin, delivery, flavonol, formulations, liposomes, malaria infections, nanomedicine, nutriose (r) fm06, oral administration, plasmodium falciparum, In-vitro, Liposomes, Malaria infections, Nanomedicine, Nutriose® fm06, Oral administration, Plasmodium falciparum

We aimed to characterize the cerebral hemodynamic response to obstructive sleep apnea/hypopnea events, and evaluate their association to polysomnographic parameters. The characterization of the cerebral hemodynamics in obstructive sleep apnea (OSA) may add complementary information to further the understanding of the severity of the syndrome beyond the conventional polysomnography.Severe OSA patients were studied during night sleep while monitored by polysomnography. Transcranial, bed-side diffuse correlation spectroscopy (DCS) and frequency-domain near-infrared diffuse correlation spectroscopy (NIRS-DOS) were used to follow microvascular cerebral hemodynamics in the frontal lobes of the cerebral cortex. Changes in cerebral blood flow (CBF), total hemoglobin concentration (THC), and cerebral blood oxygen saturation (StO2) were analyzed.We considered 3283 obstructive apnea/hypopnea events from sixteen OSA patients (Age (median, interquartile range) 57 (52-64.5); females 25%; AHI (apnea-hypopnea index) 84.4 (76.1-93.7)). A biphasic response (maximum/minimum followed by a minimum/maximum) was observed for each cerebral hemodynamic variable (CBF, THC, StO2), heart rate and peripheral arterial oxygen saturation (SpO2). Changes of the StO2 followed the dynamics of the SpO2, and were out of phase from the THC and CBF. Longer events were associated with larger CBF changes, faster responses and slower recoveries. Moreover, the extrema of the response to obstructive hypopneas were lower compared to apneas (p < .001).Obstructive apneas/hypopneas cause profound, periodic changes in cerebral hemodynamics, including periods of hyper- and hypo-perfusion and intermittent cerebral hypoxia. The duration of the events is a strong determinant of the cerebral hemodynamic response, which is more pronounced in apnea than hypopnea events.© The Author(s) 2023. Published by Oxford University Press on behalf of Sleep Research Society.

JTD Keywords: cerebral hemodynamics, desaturation, diffuse correlation spectroscopy, duration, hypopnea, hypoxemia, near-infrared spectroscopy, optical pathlength, oxygenation, severity, sleep disorder, spectroscopy, tissue, Adult, Airway obstruction, Apnea hypopnea index, Arterial oxygen saturation, Article, Blood oxygen tension, Blood-flow, Brain blood flow, Brain cortex, Cerebral hemodynamics, Controlled study, Diffuse correlation spectroscopy, Disease severity, Female, Frequency, Frontal lobe, Heart rate, Hemodynamics, Hemoglobin, Hemoglobin determination, Human, Humans, Major clinical study, Male, Near infrared spectroscopy, Near-infrared spectroscopy, Obstructive sleep apnea, Oxygen, Periodicity, Polysomnography, Sleep apnea syndromes, Sleep apnea, obstructive, Sleep disorder, Spectroscopy, near-infrared

Gap junction channels (GJCs) mediate intercellular communication by connecting two neighbouring cells and enabling direct exchange of ions and small molecules. Cell coupling via connexin-43 (Cx43) GJCs is important in a wide range of cellular processes in health and disease (Churko and Laird, 2013; Liang et al., 2020; Poelzing and Rosenbaum, 2004), yet the structural basis of Cx43 function and regulation has not been determined until now. Here, we describe the structure of a human Cx43 GJC solved by cryo-EM and single particle analysis at 2.26 Å resolution. The pore region of Cx43 GJC features several lipid-like densities per Cx43 monomer, located close to a putative lateral access site at the monomer boundary. We found a previously undescribed conformation on the cytosolic side of the pore, formed by the N-terminal domain and the transmembrane helix 2 of Cx43 and stabilized by a small molecule. Structures of the Cx43 GJC and hemichannels (HCs) in nanodiscs reveal a similar gate arrangement. The features of the Cx43 GJC and HC cryo-EM maps and the channel properties revealed by molecular dynamics simulations suggest that the captured states of Cx43 are consistent with a closed state.© 2023, Qi, Acosta Gutierrez et al.

JTD Keywords: cryo-em, dehydroepiandrosterone dhea, expression, gap junction channel, gene, gja1 mutations, hemichannel, membrane protein, phenotype, protein, structure, system, visualization, Biochemistry, Chemical biology, Connexin-43, Cryo-em, Gap junction channel, Hemichannel, Human, Membrane protein, Molecular biophysics, Oculodentodigital dysplasia, Structural biology, Structure

The formation of a biological seal around the neck of titanium (Ti) implants is critical for ensuring integration at the gingival site and for preventing bacterial colonization that may lead to periimplantitis. This process is guided by activated fibroblasts, named myofibroblasts, which secrete extracellular matrix (ECM) proteins and ECM-degrading enzymes resolving the wound. However, in some cases, Ti is not able to attract and activate fibroblasts to a sufficient extent, which may compromise the success of the implant. Fibronectin (FN) is an ECM component found in wounds that is able to guide soft tissue healing through the adhesion of cells and attraction of growth factors (GFs). However, clinical use of FN functionalized Ti implants is problematic because FN is difficult to obtain, and is sensitive to degradation. Herein, functionalizing Ti with a modified recombinant heparin binding II (HBII) domain of FN, mutated to include an Arg-Gly-Asp (RGD) sequence for promoting both fibroblast adhesion and GF attraction, is aimed at. The HBII-RGD domain is able to stimulate fibroblast adhesion, spreading, proliferation, migration, and activation to a greater extent than the native HBII, reaching values closer to those of full-length FN suggesting that it might induce the formation of a biological sealing.© 2023 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.

JTD Keywords: alpha-4-beta-1, beta, cell-binding, collagen, extracellular-matrix, fibroblast activation, fibronectin, growth factors, integrins, metalloproteinases, myofibroblasts, proliferation, soft-tissue integration, titanium, Biological-activities, Fibroblast activation, Titanium

The Bin/amphiphysin/Rvs (BAR) superfamily proteins have a crescent binding domain and bend biomembranes along the domain axis. However, their anisotropic bending rigidities and spontaneous curvatures have not been experimentally determined. Here, we estimated these values from the bound protein densities on tethered vesicles using a mean-field theory of anisotropic bending energy and orientation-dependent excluded volume. The dependence curves of the protein density on the membrane curvature are fitted to the experimental data for the I-BAR and N-BAR domains reported by C. Prevost et al. Nat. Commun., 2015, 6, 8529 and F.-C. Tsai et al. Soft Matter, 2021, 17, 4254-4265, respectively. For the I-BAR domain, all three density curves of different chemical potentials exhibit excellent fits with a single parameter set of anisotropic bending energy. When the classical isotropic bending energy is used instead, one of the curves can be fitted well, but the others exhibit large deviations. In contrast, for the N-BAR domain, two curves are not well fitted simultaneously the anisotropic model, although it is significantly improved compared to the isotropic model. This deviation likely suggests a cluster formation of the N-BAR domains.

JTD Keywords: Membrane-mediated interactions,elastic properties,bar,shape,mechanisms,inclusions,generation,polymers,driven,bod

The mutual interaction between reactive species generated by non-thermal plasma and biopolymers in solution causes oxidative modifications that can have an impact in biomedical applications.

JTD Keywords: atmospheric plasma, cellulose, dftb3, gas, oxidation, parameterization, simulations, water, Biopolymers, Hydrogen peroxide, Molecular dynamics simulation, Molecular-dynamics, Nitrites, Reactive oxygen species

JTD Keywords: Bacterial biofilms, Device, Growth, In-vitro, Infections, Laboratory method, Lung model, Responses, Temperature, Time

Cell membrane potential affects the electrostatic self-assembly of magnetizable nanoparticles around the flagellum of sperm cells, leading to the formation of biohybrid microrobots (i.e., IRONSperm) with various bending stiffness. Here we explain the influence of bull sperm cell membrane potential on the formation of two types of IRONSperm samples that are produced by electrostatic self-assembly. The first type is a proximal-coated soft body with nanoparticles concentrated on the head to maintain high flexibility of the flagellum and create a passively propagating transverse bending wave under the influence of an external rotating magnetic field. The second type is a rigid-body with nanoparticles approximately uniformly distributed along the length to provide arbitrary geometry that maintains a constant chiral shape and propel by rotation about its long axis. We present a magneto-elastohydrodynamic model to predict the swimming speed at low Reynolds number for rigid IRONSperm with arbitrary shapes, and show that decreasing the bending stiffness allows the model to capture the behavior of its soft counterpart. While the response of a rigid chiral IRONSperm is distinguished by a greater swimming speed with a smooth decay with frequency, the benefit of a soft flagellum in certain scenarios would present a much smaller range of frequencies for wireless actuation.

JTD Keywords: Biohybrid, Magnetic, Microrobots, Nanoparticles, Propulsion, Sperm cells

Liver cirrhosis is the end stage of all chronic liver diseases and contributes significantly to overall mortality of 2% globally. The age-standardized mortality from liver cirrhosis in Europe is between 10 and 20% and can be explained by not only the development of liver cancer but also the acute deterioration in the patient's overall condition. The development of complications including accumulation of fluid in the abdomen (ascites), bleeding in the gastrointestinal tract (variceal bleeding), bacterial infections, or a decrease in brain function (hepatic encephalopathy) define an acute decompensation that requires therapy and often leads to acute-on-chronic liver failure (ACLF) by different precipitating events. However, due to its complexity and organ-spanning nature, the pathogenesis of ACLF is poorly understood, and the common underlying mechanisms leading to the development of organ dysfunction or failure in ACLF are still elusive. Apart from general intensive care interventions, there are no specific therapy options for ACLF. Liver transplantation is often not possible in these patients due to contraindications and a lack of prioritization. In this review, we describe the framework of the ACLF-I project consortium funded by the Hessian Ministry of Higher Education, Research and the Arts (HMWK) based on existing findings and will provide answers to these open questions.

JTD Keywords: 12/15-lipoxygenase, combination, inflammation, interleukin-22, metabolism, mortality, organ failure, portal-hypertension, receptor, regeneration, systemic inflammation, systems medicine, translational hepatology, Decompensated cirrhosis, Organ failure, Systemic inflammation, Systems medicine, Translational hepatology

JTD Keywords: actin cytoskeleton, extracellular vesicles, vesicular transport, virulence factors, Actin cytoskeleton, Extracellular vesicles, Host-parasite interactions, Vesicular transport, Virulence factors

Titanium implantation success may be compromised by Staphylococcus aureus surface colonization and posterior infection. To avoid this issue, different strategies have been investigated to promote an antibacterial character to titanium. In this work, two antibacterial agents (silver nanoparticles and a multifunctional antimicrobial peptide) were used to coat titanium surfaces. The modulation of the nanoparticle (≈32.1 ± 9.4 nm) density on titanium could be optimized, and a sequential functionalization with both agents was achieved through a two-step functionalization method by means of surface silanization. The antibacterial character of the coating agents was assessed individually as well as combined. The results have shown that a reduction in bacteria after 4 h of incubation can be achieved on all the coated surfaces. After 24 h of incubation, however, the individual antimicrobial peptide coating was more effective than the silver nanoparticles or their combination against Staphylococcus aureus. All tested coatings were non-cytotoxic for eukaryotic cells.

JTD Keywords: antimicrobial peptide, biomaterials, bone, coatings, performance, ph, resistance, silanization, silver nanoparticles, staphylococcus aureus, Anti-bacterial agents, Antimicrobial peptide, Coated materials, biocompatible, Metal nanoparticles, Reduces bacterial adhesion, Silanization, Silver, Silver nanoparticles, Staphylococcus aureus, Surface properties, Titanium, Titanium functionalization

The bacterium Pseudomonas aeruginosa is involved in chronic infections of cystic fibrosis lungs and chronic wounds. In these infections the bacteria are present as aggregates suspended in host secretions. During the course of the infections there is a selection for mutants that overproduce exopolysaccharides, suggesting that the exopolysaccharides play a role in the persistence and antibiotic tolerance of the aggregated bacteria. Here, we investigated the role of individual P. aeruginosa exopolysaccharides in aggregate-associated antibiotic tolerance. We employed an aggregate-based antibiotic tolerance assay on a set of P. aeruginosa strains that were genetically engineered to over-produce a single, none, or all of the three exopolysaccharides Pel, Psl, and alginate. The antibiotic tolerance assays were conducted with the clinically relevant antibiotics tobramycin, ciprofloxacin and meropenem. Our study suggests that alginate plays a role in the tolerance of P. aeruginosa aggregates toward tobramycin and meropenem, but not ciprofloxacin. However, contrary to previous studies we did not observe a role for Psl or Pel in the tolerance of P. aeruginosa aggregates toward tobramycin, ciprofloxacin, and meropenem.Copyright © 2023 Liang, Nilsson, Kragh, Hedal, Alcàcer-Almansa, Kiilerich, Andersen and Tolker-Nielsen.

JTD Keywords: aggregates, antibiotic tolerance, biofilm formation, extracellular matrix, genome, growth, lungs, molecular-mechanisms, mutations, polysaccharide, pseudomonas aeruginosa, psl, system, Aggregates, Antibiotic tolerance, Biofilm, Extracellular matrix, Pseudomonas aeruginosa, Small-colony variants

JTD Keywords: alpha-tricalcium phosphate, cement, crystallinity, hydrolysis, hydroxyapatite, particle-size, powders, relative humidity, setting reaction, stability, tcp, vapor sorption, Calcium-phosphate, Moisture

Lysosomes play a central role in cellular homeostasis and alterations in this compartment associate with many diseases. The most studied example is that of lysosomal storage disorders (LSDs), a group of 60 + maladies due to genetic mutations affecting lysosomal components, mostly enzymes. This leads to aberrant intracellular storage of macromolecules, altering normal cell function and causing multiorgan syndromes, often fatal within the first years of life. Several treatment modalities are available for a dozen LSDs, mostly consisting of enzyme replacement therapy (ERT) strategies. Yet, poor biodistribution to main targets such as the central nervous system, musculoskeletal tissue, and others, as well as generation of blocking antibodies and adverse effects hinder effective LSD treatment. Drug delivery systems are being studied to surmount these obstacles, including polymeric constructs and nanoparticles that consti-tute the focus of this article. We provide an overview of the formulations being tested, the diseases they aim to treat, and the results observed from respective in vitro and in vivo studies. We also discuss the advantages and disadvantages of these strategies, the remaining gaps of knowledge regarding their per-formance, and important items to consider for their clinical translation. Overall, polymeric nanocon-structs hold considerable promise to advance treatment for LSDs.(c) 2023 Elsevier B.V. All rights reserved.

JTD Keywords: cellular and animal models, enzyme replacement therapy, lysosomal storage disorders, nanoemulsions, nanoparticles, Beta-glucuronidase deficiency, Blood-brain-barrier, Cellular and animal models, Central-nervous-system, Drug delivery systems, Enzyme replacement therapy, Feline gm1 gangliosidosis, Human acid sphingomyelinase, Human alpha-galactosidase, Humans, Lysosomal storage diseases, Lysosomal storage disorders, Lysosomes, Mucopolysaccharidosis type-ii, Nanoemulsions, Nanoparticles, Neuronal ceroid-lipofuscinosis, Niemann-pick-disease, Pluripotent stem-cells, Polymer-based drug delivery systems, Polymers, Tissue distribution

Mimicking bone extracellular matrix (ECM) is paramount to develop novel biomaterials for bone tissue engineering. In this regard, the combination of integrin-binding ligands together with osteogenic peptides represents a powerful approach to recapitulate the healing microenvironment of bone. In the present work, we designed polyethylene glycol (PEG)-based hydrogels functionalized with cell instructive multifunctional biomimetic peptides (either with cyclic RGD-DWIVA or cyclic RGD-cyclic DWIVA) and cross-linked with matrix metalloproteinases (MMPs)-degradable sequences to enable dynamic enzymatic biodegradation and cell spreading and differentiation. The analysis of the intrinsic properties of the hydrogel revealed relevant mechanical properties, porosity, swelling and degradability to engineer hydrogels for bone tissue engineering. Moreover, the engineered hydrogels were able to promote human mesenchymal stem cells (MSCs) spreading and significantly improve their osteogenic differentiation. Thus, these novel hydrogels could be a promising candidate for applications in bone tissue engineering, such as acellular systems to be implanted and regenerate bone or in stem cells therapy.Copyright © 2023 Oliver-Cervelló, Martin-Gómez, Gonzalez-Garcia, Salmeron-Sanchez, Ginebra and Mas-Moruno.

JTD Keywords: biomaterials, cross-linking, dwiva, functionalization, hydrogel, integrin, kinetics, marrow stromal cells, matrices, multifunctionality, myogenic differentiation, osteogenic differentiation, regeneration, stem-cells, Biomimetic peptides, Dwiva, Functionalization, Hydrogel, Multifunctionality, Osteogenic differentiation, Poly(ethylene glycol) hydrogels

JTD Keywords: Acquisition, C-13, Detecting tumor response, Exchang, Excitation pulses, Magnetic-resonance-spectroscopy, Metabolism, Mri, Resolution, Strategies

Previously, functional coatings on 3D-printed titanium implants were developed to improve their biointegration by separately incorporating Ga and Ag on the biomaterial surface. Now, a thermochemical treatment modification is proposed to study the effect of their simultaneous incorporation. Different concentrations of AgNO3 and Ga(NO3)3 are evaluated, and the obtained surfaces are completely characterized. Ion release, cytotoxicity, and bioactivity studies complement the characterization. The provided antibacterial effect of the surfaces is analyzed, and cell response is assessed by the study of SaOS-2 cell adhesion, proliferation, and differentiation. The Ti surface doping is confirmed by the formation of Ga-containing Ca titanates and nanoparticles of metallic Ag within the titanate coating. The surfaces generated with all combinations of AgNO3 and Ga(NO3)3 concentrations show bioactivity. The bacterial assay confirms a strong bactericidal impact achieved by the effect of both Ga and Ag present on the surface, especially for Pseudomonas aeruginosa, one of the main pathogens involved in orthopedic implant failures. SaOS-2 cells adhere and proliferate on the Ga/Ag-doped Ti surfaces, and the presence of gallium favors cell differentiation. The dual effect of both metallic agents doping the titanium surface provides bioactivity while protecting the biomaterial from the most frequent pathogens in implantology.

JTD Keywords: 3d-printing, agent, antibacterial activity, bioactive ti, biomaterials, coatings, competition, cu, gallium, glasses, ions, metal, porous structures, promote osseointegration, silver, titanium implants, In-vitro, Porous structures, Titanium implants

Despite the high homology of OmpF and OmpC, the internally folded loop responds differently to temperature increase.

JTD Keywords: diffusion, mechanism, molecules, nanopores, permeability, proteins, rules, simulations, transport, Membrane

Here we revisit tau protein aggregation at primary, secondary, tertiary and quaternary structures. In addition, the presence of non-aggregated tau protein, which has been recently discovered, is also commented on.Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.

JTD Keywords: alpha-helix, alzheimer-disease, antigenic determinants, binding, isomerase pin1, microtubule-binding repeats, neurofibrillary tangles, paired helical filaments, repeat domain, structural-characterization, tau conformations, w-tau isoform, Microtubule-associated protein, Microtubule-binding repeats, Tau, Tau conformations, W-tau isoform

Virtually, all implantable medical devices are susceptible to infection. As the main healthcare issue concerning implantable devices is the elevated risk of infection, different strategies based on the coating or functionalization of biomedical devices with antiseptic agents or antibiotics are proposed. In this work, an alternative approach is presented, which consists of the functionalization of implantable medical devices with sensors capable of detecting infection at very early stages through continuous monitoring of the bacteria metabolism. This approach, which is implemented in surgical sutures as a representative case of implantable devices susceptible to bacteria colonization, is expected to minimize the risk of worsening the patient's clinical condition. More specifically, non-absorbable polypropylene/polyethylene (PP/PE) surgical sutures are functionalized with conducting polymers using a combination of low-pressure oxygen plasma, chemical oxidative polymerization, and anodic polymerization, to detect metabolites coming from bacteria respiration. Functionalized suture yarns are used for real-time monitoring of bacteria growth, demonstrating the potential of this strategy to fight against infections.© 2023 Wiley-VCH GmbH.

JTD Keywords: adhesion, biofilm, conducting polymers, contamination, derivatives, detections, functionalized sutures, nadh, poly(3,4-ethylenedioxythiophene), Bacteria growth, Conducting polymers, Detections, Functionalized sutures, Monofilament, Nadh

Ferulic acid-loaded PLGA NPs were synthesised via low-energy emulsification methods utilising nano-emulsion templating including permeabilisation efficiency assessed using an in vitro organ-on-a-chip system that simulates the blood-brain barrier.

JTD Keywords: alzheimers-disease, curcumin, energy, nanocarriers, nanoemulsions, plga nanoparticles, polyreactions, release, transport, Drug-delivery-systems

Background In mechanical thrombectomy (MT), distal access catheters (DACs) are tracked through the vascular anatomy to reach the occlusion site. The inability of DACs to reach the occlusion site has been reported as a predictor of unsuccessful recanalization. This study aims to provide insight into how to navigate devices through the vascular anatomy with minimal track forces, since higher forces may imply more risk of vascular injuries. Methods We designed an experimental setup to monitor DAC track forces when navigating through an in vitro anatomical model. Experiments were recorded to study mechanical behaviors such as tension buildup against vessel walls, DAC buckling, and abrupt advancements. A multiple regression analysis was performed to predict track forces from the catheters' design specifications. Results DACs were successfully delivered to the target M1 in 60 of 63 in vitro experiments (95.2%). Compared to navigation with unsupported DAC, the concomitant coaxial use of a microcatheter/microguidewire and microcatheter/stent retriever anchoring significantly reduced the track forces by about 63% and 77%, respectively (p<0.01). The presence of the braid pattern in the reinforcement significantly reduced the track forces regardless of the technique used (p<0.05). Combined coil and braid reinforcement configuration, as compared with coil alone, and a thinner distal wall were predictors of lower track force when navigating with unsupported DAC. Conclusions The use of microcatheter and stent retriever facilitate smooth navigation of DACs through the vascular tortuosity to reach the occlusion site, which in turn improves the reliability of tracking when positioning the DAC closer to the thrombus interface.

JTD Keywords: catheter, navigation, stroke, thrombectomy, Catheter, Navigation, Stroke, Thrombectomy, Vessel wall

The term 'mechanosensation' describes the capacity of cells to translate mechanical stimuli into the coordinated regulation of intracellular signals, cellular function, gene expression and epigenetic programming. This capacity is related not only to the sensitivity of the cells to tissue motion, but also to the decryption of tissue geometric arrangement and mechanical properties. The cardiac stroma, composed of fibroblasts, has been historically considered a mechanically passive component of the heart. However, the latest research suggests that the mechanical functions of these cells are an active and necessary component of the developmental biology programme of the heart that is involved in myocardial growth and homeostasis, and a crucial determinant of cardiac repair and disease. In this Review, we discuss the general concept of cell mechanosensation and force generation as potent regulators in heart development and pathology, and describe the integration of mechanical and biohumoral pathways predisposing the heart to fibrosis and failure. Next, we address the use of 3D culture systems to integrate tissue mechanics to mimic cardiac remodelling. Finally, we highlight the potential of mechanotherapeutic strategies, including pharmacological treatment and device-mediated left ventricular unloading, to reverse remodelling in the failing heart.© 2022. Springer Nature Limited.

JTD Keywords: cardiomyocyte proliferation, cross-linking, extracellular-matrix, focal adhesions, gene-expression, mechanical regulation, myocardial-infarction, substrate stiffness affects, t-cells, Ventricular assist device

In addition of a key catecholamine neurotransmitter, dopamine is is the metabolite predominantly produced by specific types of tumors (e.g. paragangliomas and neuroblastomas), which cannot be diagnosed using conven-tional sensitive tests. Within this context, development of flexible electrochemical sensors to monitor dopamine levels in physiological fluids for the early diagnosis and control of diseases related to abnormal levels of such compound, is necessary. In this work, a flexible self-supported membrane, which acts directly as electrode, has been developed to detect dopamine. The membrane consists of three nanoperforated polylactic acid (PLA) layers, which provide flexibility and mechanical integrity, separated by two layers of an electroactive copolymer, which are obtained by electrochemical copolymerization of 3,4-ethylenedioxythiophene and aniline. The sensitivity and detection limit provided by the electroactive copolymer, which is accessible to dopamine molecules through the nanoperforations of the PLA outer layers, is 1.846 mu A/(cm2.mu M) and 1.7 mu M, respectively, in a urea-rich environments that mimics urine. These values allow us to propose the self-standing flexible electrodes devel-oped in this study for the detection of dopamine in patients affected by paragangliomas and neuroblastomas tumors, which typically present dopamine concentrations between 2 and 7 mu M.

JTD Keywords: 4-ethylenedioxythiophene), Conducting polymer, Electrochemical sensor, Electrodes, Hydrogels, Poly(3, Polyaniline, Polylactic acid, Selective detection, Sensors, Supercapacitors

Transcriptomics and phosphoproteomics were carried out in the cerebral cortex of B6.Cg-Mapttm1(EGFP)Klt (tau knockout: tau-KO) and wild-type (WT) 12 month-old mice to learn about the effects of tau ablation. Compared with WT mice, tau-KO mice displayed reduced anxiety-like behavior and lower fear expression induced by aversive conditioning, whereas recognition memory remained unaltered. Cortical transcriptomic analysis revealed 69 downregulated and 105 upregulated genes in tau-KO mice, corresponding to synaptic structures, neuron cytoskeleton and transport, and extracellular matrix components. RT-qPCR validated increased mRNA levels of col6a4, gabrq, gad1, grm5, grip2, map2, rab8a, tubb3, wnt16, and an absence of map1a in tau-KO mice compared with WT mice. A few proteins were assessed with Western blotting to compare mRNA expression with corresponding protein levels. Map1a mRNA and protein levels decreased. However, β-tubulin III and GAD1 protein levels were reduced in tau-KO mice. Cortical phosphoproteomics revealed 121 hypophosphorylated and 98 hyperphosphorylated proteins in tau-KO mice. Deregulated phosphoproteins were categorized into cytoskeletal (n = 45) and membrane proteins, including proteins of the synapses and vesicles, myelin proteins, and proteins linked to membrane transport and ion channels (n = 84), proteins related to DNA and RNA metabolism (n = 36), proteins connected to the ubiquitin-proteasome system (UPS) (n = 7), proteins with kinase or phosphatase activity (n = 21), and 22 other proteins related to variegated pathways such as metabolic pathways, growth factors, or mitochondrial function or structure. The present observations reveal a complex altered brain transcriptome and phosphoproteome in tau-KO mice with only mild behavioral alterations.

JTD Keywords: computational platform, conformational-changes, cytoskeleton, disease, expression, isoforms, mechanisms, mice, phosphoproteomics, phosphorylation, synapse, tau-ko, tauopathies, transcriptomics, Animals, Cerebral cortex, Cytoskeleton, Grip2 protein, mouse, Intracellular signaling peptides and proteins, Mapt protein, mouse, Mice, Mice, knockout, Nerve tissue proteins, Neurons, Phosphoproteomics, Proteostasis, Rna, messenger, Synapse, Tau proteins, Tau-ko, Tau-protein, Transcriptomics

Topographical patterns are a powerful tool to study directional migration. Grooved substrates have been extensively used as in vitro models of aligned extracellular matrix fibers because they induce cell elongation, alignment, and migration through a phenomenon known as contact guidance. This process, which involves the orientation of focal adhesions, F-actin, and microtubule cytoskeleton along the direction of the grooves, has been primarily studied on hard materials of non-physiological stiffness. But how it unfolds when the stiffness of the grooves varies within the physiological range is less known. Here we show that substrate stiffness modulates the cellular response to topographical contact guidance. We find that for fibroblasts, while focal adhesions and actin respond to topography independently of the stiffness, microtubules show a stiffness-dependent response that regulates contact guidance. On the other hand, both clusters and single breast carcinoma epithelial cells display stiffness-dependent contact guidance, leading to more directional and efficient migration when increasing substrate stiffness. These results suggest that both matrix stiffening and alignment of extracellular matrix fibers cooperate during directional cell migration, and that the outcome differs between cell types depending on how they organize their cytoskeletons.© 2023 The Authors.

JTD Keywords: actin, behavior, cell migration, contact guidance, cytoskeleton, fibroblasts, focal adhesions, matrix, microtubules, stiffness, stress fibers, topography, transduction, Contact guidance, Substrate stiffness, Topography

Surface curvature both emerges from, and influences the behavior of, living objects at length scales ranging from cell membranes to single cells to tissues and organs. The relevance of surface curvature in biology is supported by numerous experimental and theoretical investigations in recent years. In this review, first, a brief introduction to the key ideas of surface curvature in the context of biological systems is given and the challenges that arise when measuring surface curvature are discussed. Giving an overview of the emergence of curvature in biological systems, its significance at different length scales becomes apparent. On the other hand, summarizing current findings also shows that both single cells and entire cell sheets, tissues or organisms respond to curvature by modulating their shape and their migration behavior. Finally, the interplay between the distribution of morphogens or micro-organisms and the emergence of curvature across length scales is addressed with examples demonstrating these key mechanistic principles of morphogenesis. Overall, this review highlights that curved interfaces are not merely a passive by-product of the chemical, biological, and mechanical processes but that curvature acts also as a signal that co-determines these processes.© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.

JTD Keywords: biological systems, butterfly wing scales, cubic membranes, extracellular-matrix, geometry, mechanotransduction, membrane curvature, morphogenesis, neotissue growth, pattern-formation, soft materials, surface curvature, tissue-growth, Biological systems, Collective cell-migration, Surface curvature

Conductive and interactive hydrogels based on hyaluronic acid are engineered as wound dressings that enhance skin tissue regeneration either through electrical stimulation or by displaying multifunctional performance and, ultimately, interactivity.

JTD Keywords: antibacterial, fields, Anti-bacterial agents, Bacterial infections, Humans, Hyaluronic acid, Hydrogels, Injectable hydrogels, Skin, Wound healing

Multiresponsive hydrogels, which are smart soft materials that respond to more than one external stimulus, have emerged as powerful tools for biomedical applications, such as drug delivery. Within this context and with the aim of eliminating the systematic administration of antibiotics, special attention is being paid to the development of systems for controlled delivery of antibiotic for topical treatment of bacterial infections. In this work, an electro-chemo responsive hydrogel able to release chloramphenicol (CAM), a broad spectrum antibiotic also used for anticancer therapy, is proposed. This has been prepared by grafting poly(acrylic acid) (PAA) to sodium alginate (Alg) and in situ encapsulation of poly(3,4-ethylenedioxythiophene) nanoparticles loaded with CAM (PEDOT/CAM NPs), which were obtained by emulsion polymerization. Although the response to electrical stimuli of PEDOT was the main control for the release of CAM from PEDOT/CAM NPs, the release by passive diffusion had a relatively important contribution. Conversely, the passive release of antibiotic from the whole engineered hydrogel system, Alg-g-PAA/PEDOT/CAM, was negligible, whereas significant release was achieved under electrostimulation in an acid environment. Bacterial tests and assays with cancer cells demonstrated that the biological activity of CAM remained after release by electrical stimulation. Notably, the successful dual-response of the developed hydrogel to electrical stimuli and pH changes evidence the great prospect of this smart material in the biomedical field, as a tool to fight against bacterial infections and to provide local cancer treatment.

JTD Keywords: drug-delivery, films, growth, nanoparticles, Anti-bacterial agents, Bacterial infections, Cancer stem-cells, Chloramphenicol, Humans, Hydrogels, Hydrogen-ion concentration

Introduction: Three-dimensional (3D) bioprinting is a promising technique for the development of neuronal in vitro models because it controls the deposition of materials and cells. Finding a biomaterial that supports neural differentiation in vitro while ensuring compatibility with the technique of 3D bioprinting of a self-standing construct is a challenge.Methods: In this study, gelatin methacryloyl (GelMA), methacrylated alginate (AlgMA), and hyaluronic acid (HA) were examined by exploiting their biocompatibility and tunable mechanical properties to resemble the extracellular matrix (ECM) and to create a suitable material for printing neural progenitor cells (NPCs), supporting their long-term differentiation. NPCs were printed and differentiated for up to 15 days, and cell viability and neuronal differentiation markers were assessed throughout the culture.Results and Discussion: This composite biomaterial presented the desired physical properties to mimic the ECM of the brain with high water intake, low stiffness, and slow degradation while allowing the printing of defined structures. The viability rates were maintained at approximately 80% at all time points. However, the levels of beta-III tubulin marker increased over time, demonstrating the compatibility of this biomaterial with neuronal cell culture and differentiation. Furthermore, these cells showed increased maturation with corresponding functional properties, which was also demonstrated by the formation of a neuronal network that was observed by recording spontaneous activity via Ca2+ imaging.

JTD Keywords: biomaterials, bioprinting, differentiation, in vitro models, neural progenitor cells, 2d, Biomaterials, Bioprinting, C17.2, Differentiation, Extracellular-matrix, Hydrogels, In vitro models, In-vitro, Neural progenitor cells, Neuronal models, Proliferation, Scaffolds, Stem-cells, Substrate stiffness

Microcantilever-based platforms are presented as versatile lab-on-chip devices for advanced applications spanning from material characterization and environmental monitoring to energy.

JTD Keywords: mechanical-properties, micromechanical cantilever, photothermal spectroscopy, sensitive detection, silicon cantilevers, solid-liquid interface, surface-stress, thin-films, vapor detection, Nanomechanical thermal-analysis

Isotactic polypropylene (i-PP) nonabsorbable surgical meshes are modified by incorporating a conducting polymer (CP) layer to detect the adhesion and growth of bacteria by sensing the oxidation of nicotinamide adenine dinucleotide (NADH), a metabolite produced by the respiration reactions of such microorganisms, to NAD+. A three-step process is used for such incorporation: (1) treat pristine meshes with low-pressure O2 plasma; (2) functionalize the surface with CP nanoparticles; and (3) coat with a homogeneous layer of electropolymerized CP using the nanoparticles introduced in (2) as polymerization nuclei. The modified meshes are stable and easy to handle and also show good electrochemical response. The detection by cyclic voltammetry of NADH within the interval of concentrations reported for bacterial cultures is demonstrated for the two modified meshes. Furthermore, Staphylococcus aureus and both biofilm-positive (B+) and biofilm-negative (B-) Escherichia coli cultures are used to prove real-time monitoring of NADH coming from aerobic respiration reactions. The proposed strategy, which offers a simple and innovative process for incorporating a sensor for the electrochemical detection of bacteria metabolism to currently existing surgical meshes, holds considerable promise for the future development of a new generation of smart biomedical devices to fight against post-operative bacterial infections.

JTD Keywords: adhesion, bacteria metabolism, behavior, biocompatibility, conducting polymer, electrochemical sensor, hernia repair, in-vivo, liquid, nadh detection, plasma treatment, prevention, reinforcement, sensor, smart meshes, Bacteria metabolism, Bacterial infections, Conducting polymer, Electrochemical sensor, Humans, Nad, Nadh detection, Nanoparticles, Oxidation-reduction, Plasma treatment, Polymers, Polypropylene mesh, Smart meshes, Surgical mesh

Supramolecular systems chemistry has been an area of active research to develop nanomaterials with life-like functions. Progress in systems chemistry relies on our ability to probe the nanostructure formation in solution. Often visualizing the dynamics of nanostructures which transform over time is a formidable challenge. This necessitates a paradigm shift from dry sample imaging towards solution-based techniques. We review the application of state-of-the-art techniques for real-time, in situ visualization of dynamic self-assembly processes. We present how solution-based techniques namely optical super-resolution microscopy, solution-state atomic force microscopy, liquid-phase transmission electron microscopy, molecular dynamics simulations and other emerging techniques are revolutionizing our understanding of active and adaptive nanomaterials with life-like functions. This Review provides the visualization toolbox and futuristic vision to tap the potential of dynamic nanomaterials.© 2022 Wiley-VCH GmbH.

JTD Keywords: electron-microscopy, fluorescence microscopy, in-situ, mechanical-properties, molecular simulations, nanostructures, polymerization, polymers, stimulated-emission, super-resolution microscopy, supramolecular chemistry, systems chemistry, water, Atomic-force microscopy, Liquid tem, Nanostructures, Super-resolution microscopy, Supramolecular chemistry, Systems chemistry

Lately, there has been an increasing demand for materials that could improve tissue regenerative therapies and provide antimicrobial effects. Similarly, there is a growing need to develop or modify biomaterials for the diagnosis and treatment of different pathologies. In this scenario, hydroxyapatite (HAp) appears as a bioceramic with extended functionalities. Nevertheless, there are certain disadvantages related to the mechanical properties and lack of antimicrobial capacity. To circumvent them, the doping of HAp with a variety of cationic ions is emerging as a good alterative due to the different biological roles of each ion. Among many elements, lanthanides are understudied despite their great potential in the biomedical field. For this reason, the present review focuses on the biological benefits of lanthanides and how their incorporation into HAp can alter its morphology and physical properties. A comprehensive section of the applications of lanthanides-substituted HAp nanoparticles (HAp NPs) is presented to unveil the potential biomedical uses of these systems. Finally, the need to study the tolerable and non-toxic percentages of substitution with these elements is highlighted.

JTD Keywords: biolabeling, biomedicine, biosensors, bone regeneration, calcium, cancer treatment, cationic ions, cell imaging, cerium, doped hap, hydroxyapatite, implants, in-vitro bioactivity, lanthanides-substitutions, lanthanidessubstitutions, nanoparticles, radiation synovectomy, sm-153 particulate hydroxyapatite, structural-characterization, theragnostics, theranostic nanoplatforms, Europium-doped hydroxyapatite, Hydroxyapatite, Theragnostics

Human induced pluripotent stem cell (hiPSC) technologies offer a unique resource for modeling neurological diseases. However, iPSC models are fraught with technical limitations including abnormal aggregation and inefficient maturation of differentiated neurons. These problems are in part due to the absence of synergistic cues of the native extracellular matrix (ECM). We report on the use of three artificial ECMs based on peptide amphiphile (PA) supramolecular nanofibers. All nanofibers display the laminin-derived IKVAV signal on their surface but differ in the nature of their non-bioactive domains. We find that nanofibers with greater intensity of internal supramolecular motion have enhanced bioactivity toward hiPSC-derived motor and cortical neurons. Proteomic, biochemical, and functional assays reveal that highly mobile PA scaffolds caused enhanced β1-integrin pathway activation, reduced aggregation, increased arborization, and matured electrophysiological activity of neurons. Our work highlights the importance of designing biomimetic ECMs to study the development, function, and dysfunction of human neurons.Copyright © 2022 Elsevier Inc. All rights reserved.

JTD Keywords: differentiation, force-field, laminin, migration, nanostructures, peptide amphiphiles, spinal-cord, statistical-model, supramolecular materials, Coarse-grained model, Dynamics, Extracellular matrix, Ikvav, Ipsc-derived neurons, Laminin, Neuronal maturation, Peptide amphiphiles, Supramolecular motion, Supramolecular nanofibers

Peri-implantitis, caused by an inflammatory response to pathogens, is the leading cause of dental implant failure. Poor soft tissue healing surrounding implants - caused by inadequate surface properties - leads to infection, inflammation, and dysregulated keratinocyte and macrophage function. One activated inflammatory response, active around peri-implantitis compared to healthy sites, is the IL-23/IL-17A cytokine axis. Implant surfaces can be synthesized with peptide nanocoatings to present immunomodulatory motifs to target peri-implant keratinocytes to control macrophage polarization and regulate inflammatory axises toward enhancing soft tissue healing.We synthesized an IL-23 receptor (IL-23R) noncompetitive antagonist peptide nanocoating using silanization and evaluated keratinocyte secretome changes and macrophage polarization (M1-like "pro-inflammatory" vs. M2-like "pro-regenerative").IL-23R antagonist peptide nanocoatings were successfully synthesized on titanium, to model dental implant surfaces, and compared to nonfunctional nanocoatings and non-coated titanium. IL-23R antagonist nanocoatings significantly decreased keratinocyte IL-23, and downstream IL-17A, expression compared to controls. This peptide noncompetitive antagonistic function was demonstrated under lipopolysaccharide stimulation. Large scale changes in keratinocyte secretome content, toward a pro-regenerative milieu, were observed from keratinocytes cultured on the IL-23R antagonist nanocoatings compared to controls. Conditioned medium collected from keratinocytes cultured on the IL-23R antagonist nanocoatings polarized macrophages toward a M2-like phenotype, based on increased CD163 and CD206 expression and reduced iNOS expression, compared to controls.Our results support development of IL-23R noncompetitive antagonist nanocoatings to reduce the pro-inflammatory IL-23/17A pathway and augment macrophage polarization toward a pro-regenerative phenotype. Immunomodulatory implant surface engineering may promote soft tissue healing and thereby reduce rates of peri-implantitis.Copyright © 2023 Elsevier Inc. All rights reserved.

JTD Keywords: agents, alter, bioactivity, cells, dental implant, growth, keratinocyte, macrophage, peptide, peri -implant infection, peri-implant infection, Surface chemistry, Titanium

Escherichia coli is one of the most common members of the intestinal microbiota. Many of its strains are associated with various inflammatory infections, including urinary or gut infections, especially when displaying antibiotic resistance or in patients with suppressed immune systems. According to recent reports, the biofilm-forming potential of E. coli is a crucial factor for its increased resistance against antibiotics. To overcome the limitations of using antibiotics against resistant E. coli strains, the world is turning once more towards bacteriophage therapy, which is becoming a promising candidate amongst the current personalized approaches to target different bacterial infections. Although matured and persistent biofilms pose a serious challenge to phage therapy, they can still become an effective alternative to antibiotic treatment. Here, we assess the efficiency of clinically isolated phages in phage therapy against representative clinical uropathogenic and invasive biofilm-forming E. coli strains. Our results demonstrate that irrespective of host specificity, bacteriophages producing clear plaques with a high burst size, and exhibiting depolymerizing activity, are good candidates against biofilm-producing E. coli pathogens as verified from our in vitro and in vivo experiments using Galleria mellonella where survival was significantly increased for phage-therapy-treated larvae.

JTD Keywords: antibiotic resistance, assay, bacteriophage, bacteriophages, biofilm-forming potential, infection, inflammatory infections, mechanisms, Galleria-mellonella, Intestinal microflora

Tissue morphogenesis occurs in a complex physicochemical microenvironment with limited experimental accessibility. This often prevents a clear identification of the processes that govern the formation of a given functional shape. By applying state-of-the-art methods to minimal tissue systems, synthetic morphogenesis aims to engineer the discrete events that are necessary and sufficient to build specific tissue shapes. Here, we review recent advances in synthetic morphogenesis, highlighting how a combination of microfabrication and mechanobiology is fostering our understanding of how tissues are built.Copyright © 2022 Elsevier Ltd. All rights reserved.

JTD Keywords: cell dynamics, elongation, endothelial-cells, epithelium, growth, lumen, mechanical tension, patterns, self-organization, synthetic morphogenesis, tissue folding, tissue mechanics, topological defects, Cell dynamics, Humans, Morphogenesis, Stem-cells, Synthetic morphogenesis, Tissue folding, Tissue mechanics, Tissue shape

In response to different types and intensities of mechanical force, cells modulate their physical properties and adapt their plasma membrane (PM). Caveolae are PM nano-invaginations that contribute to mechanoadaptation, buffering tension changes. However, whether core caveolar proteins contribute to PM tension accommodation independently from the caveolar assembly is unknown. Here we provide experimental and computational evidence supporting that caveolin-1 confers deformability and mechanoprotection independently from caveolae, through modulation of PM curvature. Freeze-fracture electron microscopy reveals that caveolin-1 stabilizes non-caveolar invaginations-dolines-capable of responding to low-medium mechanical forces, impacting downstream mechanotransduction and conferring mechanoprotection to cells devoid of caveolae. Upon cavin-1/PTRF binding, doline size is restricted and membrane buffering is limited to relatively high forces, capable of flattening caveolae. Thus, caveolae and dolines constitute two distinct albeit complementary components of a buffering system that allows cells to adapt efficiently to a broad range of mechanical stimuli.© 2022. The Author(s).

JTD Keywords: cavin, cell-migration, cholesterol, extracellular-matrix, nanoscale organization, particle-size, polarization, size distribution, tension, Plasma-membrane

Permanently polarized hydroxyapatite (p-HAp) has been reported as a feasible green alternative to conventional catalysts for the selective conversion of CO2 into highly valuable chemical products. However, structural control and enhanced electrical properties achieved on p-HAp clearly contrast with other reported catalytic systems, where hydroxyapatite mainly acts as a support receiving much less attention. In this work we take advantage of the knowledge obtained on p-HAp to develop an HAp-based catalytic system composed of TiO2 nanoparticles deposited on p-HAp. It is important to stress that p-HAp is not only considered as a mechanical support but has been put in the spotlight for catalyst preparation and as an active catalytic part. Therefore, the use of p-HAp in this system has unveiled exceptional synergies with TiO2 attributed to the enhanced electrical properties of p-HAp, capable of attracting the photo-electrons generated in TiO2 nanoparticles avoiding electron-hole recombination. CO2 fixation reactions carried out under mild conditions (120 degrees C, 6 bar and under UV exposure) result in complete selectivity control of the C2 products, shifting from ethanol (201 mu mol g(catalyst)(-1)) for p-HAp alone to acetic acid (381 mu mol g(catalyst)(-1)) when TiO2 nanoparticles are loaded in the system. Considering the challenging CO2 activation energy and the high control of the selectivity achieved, we do believe that this novel approach can be considered as a starting point to explore other systems and reactions where control of the crystal structure and the enhanced electrical properties of HAp can play a crucial role in the final products, reaction conditions, yields and selectivities.

JTD Keywords: Behavior, Cobalt, Conversion, Methane, Ni, Oxidation, Performance, Reduction, Syngas production, Tio2

Various locomotion strategies employed by microorganisms are observed in complex biological environments. Spermatozoa assemble into bundles to improve their swimming efficiency compared to individual cells. However, the dynamic mechanisms for the formation of sperm bundles have not been fully characterized. In this study, we numerically and experimentally investigate the locomotion of spermatozoa during the transition from individual cells to bundles of two cells. Three consecutive dynamic behaviors are found across the course of the transition: hydrodynamic attraction/repulsion, alignment, and synchronization. The hydrodynamic attraction/repulsion depends on the relative orientation and distance between spermatozoa as well as their flagellar wave patterns and phase shift. Once the heads are attached, we find a stable equilibrium of the rotational hydrodynamics resulting in the alignment of the heads. The synchronization results from the combined influence of hydrodynamic and mechanical cell-to-cell interactions. Additionally, we find that the flagellar beat is regulated by the interactions during the bundle formation, whereby spermatozoa can synchronize their beats to enhance their swimming velocity.

JTD Keywords: behavior, cilia, collective locomotion, collective motion, competition, flagellar propulsion, hydrodynamics, motility, propulsion, sperm cooperation, tracking, Collective locomotion, Flagellar propulsion, Flagellar synchronization, Spermatozoa bundle

Prion-like domains (PrLDs) are intrinsically disordered regions (IDRs) of low sequence complexity with a similar composition to yeast prion domains. PrLDs-containing proteins have been involved in different organisms' regulatory processes. Regions of moderate amyloid propensity within IDRs have been shown to assemble autonomously into amyloid fibrils. These sequences tend to be rich in polar amino acids and often escape from the detection of classical bioinformatics screenings that look for highly aggregation-prone hydrophobic sequence stretches. We defined them as cryptic amyloidogenic regions (CARs) and recently developed an integrated database that collects thousands of predicted CARs in IDRs. CARs seem to be evolutionary conserved among disordered regions because of their potential to stablish functional contacts with other biomolecules. Here we have focused on identifying and characterizing CARs in prion-like proteins (pCARs) from plants, a lineage that has been poorly studied in comparison with other prionomes. We confirmed the intrinsic amyloid potential for a selected pCAR from Arabidopsis thaliana and explored functional enrichments and compositional bias of pCARs in plant prion-like proteins.Copyright © 2023 Pintado-Grima, Santos, Iglesias, Manglano-Artuñedo, Pallarès and Ventura.

JTD Keywords: aggregation, aromatic residues, bioinformatics, domains, functional interactions, identify proteins, plants, prediction, prion-like domains, q/n-rich, regulator, sup35, yeast, Bioinformatics, Cryptic amyloidogenic regions, Functional interactions, Plants, Prion-like domains, Rna-binding proteins

Sperm cells undergo complex interactions with external environments, such as a solid-boundary, fluid flow, as well as other cells before arriving at the fertilization site. The interaction with the oviductal epithelium, as a site of sperm storage, is one type of cell-to-cell interaction that serves as a selection mechanism. Abnormal sperm cells with poor swimming performance, the major cause of male infertility, are filtered out by this selection mechanism. In this study, collinear bundles, consisting of two sperm cells, generate propulsive thrusts along opposite directions and allow to observe the influence of cell-to-cell interaction on flagellar wave-patterns. The developed elasto-hydrodynamic model demonstrates that steric and adhesive forces lead to highly symmetrical wave-pattern and reduce the bending amplitude of the propagating wave. It is measured that the free cells exhibit a mean flagellar curvature of 6.4 +/- 3.5 rad mm(-1) and a bending amplitude of 13.8 +/- 2.8 rad mm(-1). After forming the collinear bundle, the mean flagellar curvature and bending amplitude are decreased to 1.8 +/- 1.1 and 9.6 +/- 1.4 rad mm(-1), respectively. This study presents consistent theoretical and experimental results important for understanding the adaptive behavior of sperm cells to the external time-periodic force encountered during sperm-egg interaction.

JTD Keywords: bovine sperm cells, cell-to-cell interaction, flagellar propulsion, Bovine sperm cells, Cell-to-cell interaction, Cilia, Filaments, Flagellar propulsion, Hydrodynamic models, Mechanism, Micro-video, Model, Motility, Thermotaxis, Transformations, Transition

Peripheral inputs continuously shape brain function and can influence memory acquisition, but the underlying mechanisms have not been fully understood. Cannabinoid type-1 receptor (CB1R) is a well-recognized player in memory performance, and its systemic modulation significantly influences memory function. By assessing low arousal/non-emotional recognition memory in mice, we found a relevant role of peripheral CB1R in memory persistence. Indeed, the peripherally-restricted CB1R specific antagonist AM6545 showed significant mnemonic effects that were occluded in adrenalectomized mice, and after peripheral adrenergic blockade. AM6545 also transiently impaired contextual fear memory extinction. Vagus nerve chemogenetic inhibition reduced AM6545-induced mnemonic effect. Genetic CB1R deletion in dopamine β-hydroxylase-expressing cells enhanced recognition memory persistence. These observations support a role of peripheral CB1R modulating adrenergic tone relevant for cognition. Furthermore, AM6545 acutely improved brain connectivity and enhanced extracellular hippocampal norepinephrine. In agreement, intra-hippocampal β-adrenergic blockade prevented AM6545 mnemonic effects. Altogether, we disclose a novel CB1R-dependent peripheral mechanism with implications relevant for lengthening the duration of non-emotional memory.© 2022. The Author(s), under exclusive licence to American College of Neuropsychopharmacology.

JTD Keywords: antagonist, consolidation, contextual fear memory, electrical-stimulation, hippocampal function, improves memory, locus-coeruleus, reconsolidation, stress, Vagus nerve-stimulation

Glycans are ubiquitously expressed sugars, coating the cell and protein surfaces. They are found on many proteins as either short and branched chains or long chains sticking out from special membrane proteins, known as proteoglycans. This sugar cushion, the glycocalyx, modulates specific interactions and protects the cell. Here it is shown that both the expression of proteoglycans and the glycans expressed on the surface of both the host and virus proteins have a critical role in modulating viral attachment to the cell. A mathematical model using SARS-Cov-2 as an archetypical virus to study the glycan role during infection is proposed. It is shown that this occurs via a tug-of-war of forces. On one side, the multivalent molecular recognition that viral proteins have toward specific host glycans and receptors. On the other side, the glycan steric repulsion that a virus must overcome to approach such specific receptors. By balancing both interactions, viral tropism can be predicted. In other words, the authors can map out the cells susceptible to virus infection in terms of receptors and proteoglycans compositions.© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.

JTD Keywords: binding, entry, glycocalyx, mechanisms, multiplexing, multivalency, nanoparticles, recognition, super-selectivity, viral infectivity, Functional receptor, Glycans, Glycocalyx, Multiplexing, Multivalency, Nanoparticles, Super-selectivity, Viral infectivity

The involvement of the extracellular matrix (ECM) in tumor progression has motivated the development of biomaterials mimicking the tumor ECM to develop more predictive cancer models. Particularly, polypeptides based on elastin could be an interesting approach to mimic the ECM due to their tunable properties. Here, we demonstrated that elastin-like recombinamer (ELR) hydrogels can be suitable biomaterials to develop breast cancer models. This hydrogel was formed by two ELR polypeptides, one containing sequences biodegradable by matrix metalloproteinase and cyclooctyne and the other carrying arginylglycylaspartic acid and azide groups to allow cell adhesion, biodegradability, and suitable stiffness through "click-chemistry" cross-linking. Our findings show that breast cancer or nontumorigenic breast cells showed high viability and cell proliferation for up to 7 days. MCF7 and MCF10A formed spheroids whereas MDA-MB-231 formed cell networks, with the expression of ECM and high drug resistance in all cases, evidencing that ELR hydrogels are a promising biomaterial for breast cancer modeling.

JTD Keywords: clinical-trials, collagen i, discovery, mcf-7 cells, phenotype, progression, spheroids, translation, tumor microenvironment, Extracellular-matrix

A variety of wound healing platforms have been proposed to alleviate the hypoxic condition and/or to modulate the immune responses for the treatment of chronic wounds in diabetes. However, these platforms with the passive diffusion of therapeutic agents through the blood clot result in the relatively low delivery efficiency into the deep wound site. Here, a microalgae-based biohybrid microrobot for accelerated diabetic wound healing is developed. The biohybrid microrobot autonomously moves at velocity of 33.3 µm s-1 and generates oxygen for the alleviation of hypoxic condition. In addition, the microrobot efficiently bound with inflammatory chemokines of interleukin-8 (IL-8) and monocyte chemoattractant protein-1 (MCP-1) for modulating the immune responses. The enhanced penetration of microrobot is corroborated by measuring fibrin clots in biomimetic wound using microfluidic devices and the enhanced retention of microrobot is confirmed in the real wounded mouse skin tissue. After deposition on the chronic wound in diabetic mice without wound dressing, the wounds treated with microrobots are completely healed after 9 days with the significant decrease of inflammatory cytokines below 31% of the control level and the upregulated angiogenesis above 20 times of CD31+ cells. These results confirm the feasibility of microrobots as a next-generation platform for diabetic wound healing.© 2022 Wiley-VCH GmbH.

JTD Keywords: biohybrid, microrobots, polyions, wound healing, Algae, Biohybrid, Chemokines, Microrobots, Polyions, Wound healing

Plasma-treated hydrogels have been put forward as a potential selective osteosarcoma therapy through the release of reactive species to the diseased site. To allow their translation to the clinics, it is crucial to show that the oxidative stress delivered by such hydrogels does not adversely affect healthy tissues. This is evaluated here by investigating the in vivo performance of a robocasted calcium phosphate cement infiltrated by a plasma-treated hydrogel. The plasma-treated composite implanted in a critical size bone defect of healthy rabbits revealed its safety, allowing equivalent bone ingrowth compared to the control scaffolds and to that of direct plasma treatment of the bone defect. This opens the door for using composite biomaterials containing plasma-generated reactive species in bone therapies.

JTD Keywords: Atmospheric plasma, Bone, Bone graft, Ceramic-hydrogel composite, Cold atmospheric plasma, Local therapy, Osteosarcoma, Plasma-treated polymer solutions, Substitutes, Survival

The etiology of dental caries remains poorly understood. With the advent of next-generation sequencing, a number of studies have focused on the microbial ecology of the disease. However, taxonomic associations with caries have not been consistent. Researchers have also pursued function-centric studies of the caries microbial communities aiming to identify consistently conserved functional pathways. A major question is whether changes in microbiome are a cause or a consequence of the disease. Thus, there is a critical need to define conserved functional signatures at the onset of dental caries.Since it is unethical to induce carious lesions clinically, we developed an innovative longitudinal ex-vivo model integrated with the advanced non-invasive multiphoton second harmonic generation bioimaging to spot the very early signs of dental caries, combined with 16S rRNA short amplicon sequencing and liquid chromatography-mass spectrometry-based targeted metabolomics.For the first time, we induced longitudinally monitored caries lesions validated with the scanning electron microscope. Consequently, we spotted the caries onset and, associated with it, distinguished five differentiating metabolites - Lactate, Pyruvate, Dihydroxyacetone phosphate, Glyceraldehyde 3-phosphate (upregulated) and Fumarate (downregulated). Those metabolites co-occurred with certain bacterial taxa; Streptococcus, Veillonella, Actinomyces, Porphyromonas, Fusobacterium, and Granulicatella, regardless of the abundance of other taxa.These findings are crucial for understanding the etiology and dynamics of dental caries, and devising targeted interventions to prevent disease progression.© 2022 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.

JTD Keywords: bacteria, biofilms, children, dental caries, generation, genomics, longitudinal model, metabolism, metabolomics, microscopy, non-invasive bioimaging, oral microbiome, plaque, restorations, signatures, Dental caries, Field-emission sem, Signatures

Abstract Background Neural tissue has limited regenerative ability. To cope with that, in recent years a diverse set of novel tools has been used to tailor neurostimulation therapies and promote functional regeneration after axonal injuries. Method In this report, we explore cell-specific methods to modulate neuronal activity, including opto- and chemogenetics to assess the effect of specific neuronal stimulation in the promotion of axonal regeneration after injury. Results Opto- and chemogenetic stimulations of neuronal activity elicited increased in vitro neurite outgrowth in both sensory and cortical neurons, as well as in vivo regeneration in the sciatic nerve, but not after spinal cord injury. Mechanistically, inhibitory substrates such as chondroitin sulfate proteoglycans block the activity induced increase in axonal growth. Conclusions We found that genetic modulations of neuronal activity on both dorsal root ganglia and corticospinal motor neurons increase their axonal growth capacity but only on permissive environments.

JTD Keywords: activation, chemogenetics, electrical-stimulation, expression, functional recovery, increases, injury, motor cortex, neuronal activity, optogenetics, permissive substrate, promotes recovery, regeneration, Optogenetics, Regeneration, Spinal-cord

Tissue engineering is nowadays a powerful tool to restore damaged tissues and recover their normal functionality. Advantages over other current methods are well established, although a continuous evolution is still necessary to improve the final performance and the range of applications. Trends are nowadays focused on the development of multifunctional scaffolds with hierarchical structures and the capability to render a sustained delivery of bioactive molecules under an appropriate stimulus. Nanocomposites incorporating hydroxyapatite nanoparticles (HAp NPs) have a predominant role in bone tissue regeneration due to their high capacity to enhance osteoinduction, osteoconduction, and osteointegration, as well as their encapsulation efficiency and protection capability of bioactive agents. Selection of appropriated polymeric matrices is fundamental and consequently great efforts have been invested to increase the range of properties of available materials through copolymerization, blending, or combining structures constituted by different materials. Scaffolds can be obtained from different processes that differ in characteristics, such as texture or porosity. Probably, electrospinning has the greater relevance, since the obtained nanofiber membranes have a great similarity with the extracellular matrix and, in addition, they can easily incorporate functional and bioactive compounds. Coaxial and emulsion electrospinning processes appear ideal to generate complex systems able to incorporate highly different agents. The present review is mainly focused on the recent works performed with Hap-loaded scaffolds having at least one structural layer composed of core/shell nanofibers.

JTD Keywords: bone tissue, coaxial electrospinning, composite nanofibers, drug-release behavior, emulsion electrospinning, hydroxyapatite, in-vitro evaluation, mechanical-properties, osteogenic differentiation, pickering emulsions, protein adsorption, structured scaffolds, surface-initiated polymerization, tissue regeneration, Bone tissue, Coaxial electrospinning, Emulsion electrospinning, Hydroxyapatite, Multifunctional scaffolds, Poly(3-hydroxybutyrate) phb patches, Tissue regeneration

Directed cell migration is an essential building block of life, present when an embryo develops, a dendritic cell migrates toward a lymphatic vessel, or a fibrotic organ fails to restore its normal parenchyma. Directed cell migration is often guided by spatial gradients in a physicochemical property of the cell microenvironment, such as a gradient in chemical factors dissolved in the medium or a gradient in the mechanical properties of the substrate. Single cells and tissues sense these gradients, establish a back-to-front polarity, and coordinate the migration machinery accordingly. Central to these steps we find physical forces. In some cases, these forces are integrated into the gradient sensing mechanism. Other times, they transmit information through cells and tissues to coordinate a collective response. At any time, they participate in the cellular migratory system. In this review, we explore the role of physical forces in gradient sensing, polarization, and coordinating movement from single cells to multicellular collectives. We use the framework proposed by the molecular clutch model and explore to what extent asymmetries in the different elements of the clutch can lead to directional migration.

JTD Keywords: Cell migration, Cell traction forces, Chemotaxis, Contact guidance, Curvotaxis, Cytoskeleton, Durotaxis, Extracellular-matrix, Focal adhesions, Guidance, Haptotaxis, Leading-edge, Mechanotaxis, Membrane tension, Molecular clutch model, Myosin-ii, Reduced inequalities, Rigidity, Stress fibers, Traction

Although an increasing number of micro/nanomotors have been designed for environmental remediation in the past decade, the construction of contaminants-fueled nanomotors for synergistically degrading multiple pollutants simultaneously remains a challenge. Herein, laccase-powered Fe3O4@silica nanomotors are fabricated, assisted with lipase enzyme for the enhanced degradation of multiple contaminants using the contaminants themselves as fuels. Notably, we demonstrate that representative industrial phenols and polycyclic aromatic pollutants possess the ability of triggering the enhanced Brownian motion of laccase nanomotors (De of 1.16 mu m(2)/s in 220 mu M biphenol A (BPA), 1.40 mu m(2)/s in 375 mu M Congo red (CR)). Additionally, the k(cat) value of lipase-assisted laccase-powered nanomotors increased over 1.4 times, enhancing their Brownian motion, while leading to the efficient degradation of multiple contaminants such as BPA, CR, and triacetin droplets within 40 min, simultaneously. Ultimately, the lipase-assisted laccase nanomotors exhibit great advantages over free laccase, free lipase, lipase nanomotors, or laccase nanomotors in K-m, k(cat), catalytic stability, recycling property, and the degradation efficiency of contaminants. Therefore, our work further broadens the library of enzyme-powered nanomotors and provides deep insights in synergistical enzymatic catalysis, thus paving avenues for environmental remediation based on enzyme-powered micro/nanomotors. (C) 2022 Elsevier Ltd. All rights reserved.

JTD Keywords: core, dye, environmental remediation, enzyme catalysis, hybrid, light, microspheres, motors, pollutants removal, propulsion, removal, self-propulsion, shell, Core, Dye, Environmental remediation, Enzyme catalysis, Hybrid, Light, Micro/nanomotors, Micromotors, Microspheres, Motors, Pollutants removal, Propulsion, Removal, Self-propulsion, Shell

JTD Keywords: copper, emissions, ethanol productions, greenhouse gases, solar energy, sustainable catalysts, Environmental pollution, Reduction

It has been recently shown that electron transfer between mitochondrial cytochrome c and the cytochrome c1 subunit of the cytochrome bc1 can proceed at long-distance through the aqueous solution. Cytochrome c is thought to adjust its activity by changing the affinity for its partners via Tyr48 phosphorylation, but it is unknown how it impacts the nanoscopic environment, interaction forces, and long-range electron transfer. Here, we constrain the orientation and separation between cytochrome c1 and cytochrome c or the phosphomimetic Y48pCMF cytochrome c, and deploy an array of single-molecule, bulk, and computational methods to investigate the molecular mechanism of electron transfer regulation by cytochrome c phosphorylation. We demonstrate that phosphorylation impairs long-range electron transfer, shortens the long-distance charge conduit between the partners, strengthens their interaction, and departs it from equilibrium. These results unveil a nanoscopic view of the interaction between redox protein partners in electron transport chains and its mechanisms of regulation.© 2022. The Author(s).

JTD Keywords: apoptosis, binding, cardiolipin, complex, dynamics, force, respiration, structural basis, tyrosine phosphorylation, Histone chaperone activity

Around 30-40% of patients with colorectal cancer (CRC) undergoing curative resection of the primary tumour will develop metastases in the subsequent years1. Therapies to prevent disease relapse remain an unmet medical need. Here we uncover the identity and features of the residual tumour cells responsible for CRC relapse. An analysis of single-cell transcriptomes of samples from patients with CRC revealed that the majority of genes associated with a poor prognosis are expressed by a unique tumour cell population that we named high-relapse cells (HRCs). We established a human-like mouse model of microsatellite-stable CRC that undergoes metastatic relapse after surgical resection of the primary tumour. Residual HRCs occult in mouse livers after primary CRC surgery gave rise to multiple cell types over time, including LGR5+ stem-like tumour cells2-4, and caused overt metastatic disease. Using Emp1 (encoding epithelial membrane protein 1) as a marker gene for HRCs, we tracked and selectively eliminated this cell population. Genetic ablation of EMP1high cells prevented metastatic recurrence and mice remained disease-free after surgery. We also found that HRC-rich micrometastases were infiltrated with T cells, yet became progressively immune-excluded during outgrowth. Treatment with neoadjuvant immunotherapy eliminated residual metastatic cells and prevented mice from relapsing after surgery. Together, our findings reveal the cell-state dynamics of residual disease in CRC and anticipate that therapies targeting HRCs may help to avoid metastatic relapse.© 2022. The Author(s), under exclusive licence to Springer Nature Limited.

JTD Keywords: colonization, defines, human colon, mutations, plasticity, retrieval, stem-cells, subtypes, underlie, Animal, Animal cell, Animal experiment, Animal model, Animal tissue, Animals, Article, Cancer, Cancer growth, Cancer immunotherapy, Cancer inhibition, Cancer recurrence, Cancer staging, Cell, Cell adhesion, Cell migration, Cell population, Cell surface receptor, Cohort analysis, Colorectal cancer, Colorectal neoplasms, Colorectal tumor, Comprehensive molecular characterization, Controlled study, Crispr-cas9 system, Cytoskeleton, Disease exacerbation, Disease progression, Dynamics, Emp1 gene, Epithelial membrane protein-1, Extracellular matrix, Flow cytometry, Fluorescence intensity, Gene expression, Genetics, Human, Human cell, Humans, Immune response, Immunofluorescence, In situ hybridization, Marker gene, Metastasis potential, Mice, Minimal residual disease, Mouse, Neoplasm proteins, Neoplasm recurrence, local, Neoplasm, residual, Nonhuman, Pathology, Phenotype, Prevention and control, Protein, Receptors, cell surface, Single cell rna seq, Tumor, Tumor protein, Tumor recurrence

Supramolecular assemblies have been gaining attention in recent years in the field of drug delivery because of their unique formulation possibilities and adaptive behavior. Their non-covalent nature allows for their self-assembly formulation and responsiveness to stimuli, an appealing feature to trigger a therapeutic action with spatiotemporal control. However, facing in vivo conditions is very challenging for non-covalent structures. Dilution and proteins in blood can have a direct impact on self assembly, destabilizing the supramolecules and leading to a premature and uncontrolled cargo release. To rationalize this behavior, we designed three monomers exhibiting distinct hydrophobic cores that self-assemble into photo-responsive fibers. We estimated their stability-responsiveness tradeoff in vitro, finding two well-separated regimes. These are low-robustness regime, in which the system equilibrates quickly and responds readily to stimuli, and high-robustness regime, in which the system equilibrates slowly and is quite insensitive to stimuli. We probed the performance of both regimes in a complex environment using Fo''rster resonance energy transfer (FRET). Interestingly, the stability-responsiveness trade-off defines perfectly the extent of disassembly caused by dilution but not the one caused by protein interaction. This identifies a disconnection between intrinsic supramolecular robustness and supramolecular stability in the biological environment, strongly influenced by the disassembly pathway upon protein interaction. These findings shed light on the key features to address for supramolecular stability in the biological environment.

JTD Keywords: Azobenzene, Critical micellization, Fret, Guide, Nanoparticles, Ph, Photoisomerization, Polymerization, Shape, Water

Brain function is a product of the balance between excitatory and inhibitory (E/I) brain activity. Variation in the regulation of this activity is thought to give rise to normal variation in human traits, and disruptions are thought to potentially underlie a spectrum of neuropsychiatric conditions (e.g., Autism, Schizophrenia, Downs' Syndrome, intellectual disability). Hypotheses related to E/I dysfunction have the potential to provide cross-diagnostic explanations and to combine genetic and neurological evidence that exists within and between psychiatric conditions. However, the hypothesis has been difficult to test because: (1) it lacks specificity-an E/I dysfunction could pertain to any level in the neural system- neurotransmitters, single neurons/receptors, local networks of neurons, or global brain balance - most researchers do not define the level at which they are examining E/I function; (2) We lack validated methods for assessing E/I function at any of these neural levels in humans. As a result, it has not been possible to reliably or robustly test the E/I hypothesis of psychiatric disorders in a large cohort or longitudinal patient studies. Currently available, in vivo markers of E/I in humans either carry significant risks (e.g., deep brain electrode recordings or using Positron Emission Tomography (PET) with radioactive tracers) and/or are highly restrictive (e.g., limited spatial extent for Transcranial Magnetic Stimulation (TMS) and Magnetic Resonance Spectroscopy (MRS). More recently, a range of novel Electroencephalography (EEG) features has been described, which could serve as proxy markers for E/I at a given level of inference. Thus, in this perspective review, we survey the theories and experimental evidence underlying 6 novel EEG markers and their biological underpinnings at a specific neural level. These cheap-to-record and scalable proxy markers may offer clinical utility for identifying subgroups within and between diagnostic categories, thus directing more tailored sub-grouping and, therefore, treatment strategies. However, we argue that studies in clinical populations are premature. To maximize the potential of prospective EEG markers, we first need to understand the link between underlying E/I mechanisms and measurement techniques.

JTD Keywords: Cortical networks, Direction selectivity, Excitation/inhibition balance, Fast network oscillations, Gaba concentration, Gamma oscillation frequency, Neuronal oscillations, Range temporal correlations, Self-organized criticality, Theta-oscillations

JTD Keywords: anti-fxiia antibody, artificial surfaces, blood compatibility, complement activation, factor xii, fibrinolytic system, hemocompatible coatings, interactive hemocompatibility, poly(2-methacryloyloxyethyl phosphorylcholine), polyethylene oxide, polymer brushes, radical polymerization, sequential coimmobilization, Antifouling polymer brushes, Protein adsorption

Whenever an artificial surface comes into contact with blood, proteins are rapidly adsorbed onto its surface. This phenomenon, termed fouling, is then followed by a series of undesired reactions involving activation of complement or the coagulation cascade and adhesion of leukocytes and platelets leading to thrombus formation. Thus, considerable efforts are directed towards the preparation of fouling-resistant surfaces with the best possible hemocompatibility. Herein, a comprehensive hemocompatibility study after heparinized blood contact with seven polymer brushes prepared by surface-initiated atom transfer radical polymerization is reported. The resistance to fouling is quantified and thrombus formation and deposition of blood cellular components on the coatings are analyzed. Moreover, identification of the remaining adsorbed proteins is performed via mass spectroscopy to elucidate their influence on the surface hemocompatibility. Compared with an unmodified glass surface, the grafting of polymer brushes minimizes the adhesion of platelets and leukocytes and prevents the thrombus formation. The fouling from undiluted blood plasma is reduced by up to 99%. Most of the identified proteins are connected with the initial events of foreign body reaction towards biomaterial (coagulation cascade proteins, complement component, and inflammatory proteins). In addition, several proteins that are not previously linked with blood-biomaterial interaction are presented and discussed.

JTD Keywords: antifouling surfaces, biosensor, blood-plasma, coagulation, coatings, compatibility, glycoprotein, hemocompatibility, identification, methacrylate), ms identification, polymer brushes, protein adsorption, surface-chemistry, Antifouling surfaces, High-density-lipoprotein, Protein adsorption

Individual biohybrid microrobots have the potential to perform biomedical in vivo tasks such as remote-controlled drug and cell delivery and minimally invasive surgery. This work demonstrates the formation of biohybrid sperm-templated clusters under the influence of an external magnetic field and essential functionalities for wireless actuation and drug delivery. Ferromagnetic nanoparticles are electrostatically assembled around dead sperm cells, and the resulting nanoparticle-coated cells are magnetically assembled into three-dimensional biohybrid clusters. The aim of this clustering is threefold: First, to enable rolling locomotion on a nearby solid boundary using a rotating magnetic field; second, to allow for noninvasive localization; third, to load the cells inside the cluster with drugs for targeted therapy. A magneto-hydrodynamic model captures the rotational response of the clusters in a viscous fluid, and predicts an upper bound for their step-out frequency, which is independent of their volume or aspect ratio. Below the step-out frequency, the rolling velocity of the clusters increases nonlinearly with their perimeter and actuation frequency. During rolling locomotion, the clusters are localized using ultrasound images at a relatively large distance, which makes these biohybrid clusters promising for deep-tissue applications. Finally, we show that the estimated drug load scales with the number of cells in the cluster and can be retained for more than 10 h. The aggregation of microrobots enables them to collectively roll in a predictable way in response to an external rotating magnetic field, and enhances ultrasound detectability and drug loading capacity compared to the individual microrobots. The favorable features of biohybrid microrobot clusters place emphasis on the importance of the investigation and development of collective microrobots and their potential for in vivo applications.

JTD Keywords: drug delivery, magnetic actuation, microrobot aggregation, sperm, Driven, Drug delivery, Magnetic actuation, Magnetotactic bacteria, Microrobot aggregation, Microrobots, Motion, Movement, Propulsion, Sperm, Sphere, Ultrasound, Wall

Several factors present in the extracellular environment regulate epithelial cell adhesion and dynamics. Among them, growth factors such as EGF, upon binding to their receptors at the cell surface, get internalized and directly activate the acto-myosin machinery. In this study we present the effects of EGF on the contractility of epithelial cancer cell colonies in confined geometry of different sizes. We show that the extent to which EGF triggers contractility scales with the cluster size and thus the number of cells. Moreover, the collective contractility results in a radial distribution of traction forces, which are dependent on integrin β1 peripheral adhesions and transmitted to neighboring cells through adherens junctions. Taken together, EGF-induced contractility acts on the mechanical crosstalk and linkage between the cell-cell and cell-matrix compartments, regulating collective responses.Copyright © 2022 The Authors. Published by Elsevier GmbH.. All rights reserved.

JTD Keywords: actin, activation, actomyosin, adherens junctions, adhesion, e-cadherin, egf, maturation, mechanical regulation, micropatterning, migration, traction forces, transduction, transmission, Actomyosin, Adherens junctions, Cell adhesion, Cell membrane, Collective contractility, Egf, Epidermal growth factor, Epidermal-growth-factor, Epithelial cells, Micropatterning, Myosins, Traction forces

Galleria mellonella is an alternative animal model of infection. The use of this species presents a wide range of advantages, as its maintenance and rearing are both easy and inexpensive. Moreover, its use is considered to be more ethically acceptable than other models, it is conveniently sized for manipulation, and its immune system has multiple similarities with mammalian immune systems. Hemocytes are immune cells that help encapsulate and eliminate pathogens and foreign particles. All of these reasons make this insect a promising animal model. However, cultivating G. mellonella hemocytes in vitro is not straightforward and it has many difficult challenges. Here, we present a methodologically optimized protocol to establish and maintain a G. mellonella hemocyte primary culture. These improvements open the door to easily and quickly study the toxicity of nanoparticles and the interactions of particles and materials in an in vitro environment.

JTD Keywords: cell culture, galleria mellonella, infection, nanoparticle, Bacteria, Cell culture, Galleria mellonella, Hemolin, Infection, Insect hemocytes, Larvae, Lepidoptera, Nanoparticle, Phagocytosis, Prophenoloxidase, Suspension, Systems

The immunomodulatory potential of mycobacteria to be used for therapeutic purposes varies by species and culture conditions and is closely related to mycobacterial lipid composition. Although the lipids present in the mycobacterial cell wall are relevant, lipids are mainly stored in intracellular lipid inclusions (ILIs), which have emerged as a crucial structure in understanding mycobacteria-host interaction. Little is known about ILI ultrastructure, production, and composition in nonpathogenic species. In this study, we compared the lipid profiles of the nonpathogenic immunomodulatory agent Mycobacterium brumae during pellicle maturation under different culture conditions with qualitative and quantitative approaches by using high-resolution imaging and biochemical and composition analyses to understand ILI dynamics. The results showed wax esters, mainly in early stages of development, and acylglycerols in mature ILI composition, revealing changes in dynamics, amount, and morphometry, depending on pellicle maturation and the culture media used. Low-glycerol cultures induced ILIs with lower molecular weights which were smaller in size in comparison with the ILIs produced in glycerol-enriched media. The data also indicate the simple metabolic plasticity of lipid synthesis in M. brumae, as well as its high versatility in generating different lipid profiles. These findings provide an interesting way to enhance the production of key lipid structures via the simple modulation of cell culture conditions.

JTD Keywords: cell wall, electron microscopy, intrabacterial, lipid inclusions, mycobacterium, Bodies, Cell wall, Electron microscopy, Growth, In-vitro, Intrabacterial, Lipid inclusions, Mycobacterium, Prokaryotes, Triacylglycerol, Tuberculosis, Ultrastructural imaging, Virulence, Wax esters

Identification of asymptomatic patients at higher risk for suffering cardiac events remains controversial and challenging in Brugada syndrome (BS). In this work, we proposed an ECG-based classifier to predict BS-related symptoms, by merging the most predictive electrophysiological features derived from the ventricular depolarization and repolarization periods, along with autonomic-related markers. The initial feature space included local and dynamic ECG markers, assessed during a physical exercise test performed in 110 BS patients (25 symptomatic). Morphological, temporal and spatial properties quantifying the ECG dynamic response to exercise and recovery were considered. Our model was obtained by proposing a two-stage feature selection process that combined a resampled-based regularization approach with a wrapper model assessment for balancing, simplicity and performance. For the classification step, an ensemble was constructed by several logistic regression base classifiers, whose outputs were fused using a performance-based weighted average. The most relevant predictors corresponded to the repolarization interval, followed by two autonomic markers and two other makers of depolarization dynamics. Our classifier allowed for the identification of novel symptom-related markers from autonomic and dynamic ECG responses during exercise testing, suggesting the need for multifactorial risk stratification approaches in order to predict future cardiac events in asymptomatic BS patients.

JTD Keywords: brugada syndrome, depolarization disorders, ensemble classifier, heart-rate recovery, Acute myocardial-ischemia, Autonomic nervous system, Autonomics, Brugada syndrome, Brugadum syndrome, Cardiac death, Death, sudden, cardiac, Depolarization, Depolarization disorder, Depolarization disorders, Dynamic ecg, Electrocardiography, Electrophysiology, Ensemble classifier, Ensemble-classifier, Events, Exercise, Exercise test, Forecasting, Heart, Heart rate, Heart-rate, Heart-rate recovery, Humans, Prognosis, Qrs, Quantification, Recovery, Repolarization, Sudden cardiac death

Single-molecule localization microscopy (SMLM) is a powerful super-resolution technique for elucidating structure and dynamics in the life- and material sciences. Simultaneously acquiring spectral information (spectrally resolved SMLM, sSMLM) has been hampered by several challenges: an increased complexity of the optical detection pathway, lower accessible emitter densities, and compromised spatio-spectral resolution. Here we present a single-component, low-cost implementation of sSMLM that addresses these challenges. Using a low-dispersion transmission grating positioned close to the image plane, the +1stdiffraction order is minimally elongated and is analyzed using existing single-molecule localization algorithms. The distance between the 0th and 1st order provides accurate information on the spectral properties of individual emitters. This method enables a 5-fold higher emitter density while discriminating between fluorophores whose peak emissions are less than 15 nm apart. Our approach can find widespread use in single-molecule applications that rely on distinguishing spectrally different fluorophores under low photon conditions.

JTD Keywords: cells, multicolor imaging, nanoscopy, particle tracking, point accumulation for imaging in nanoscale topography (paint), precision, single-molecule fo?rster resonance energy transfer (smfret), stochastic optical reconstruction microscopy (storm), Diffraction-limit, Multicolor imaging, Point accumulation for imaging in nanoscale topography (paint), Single-molecule förster resonance energy transfer (smfret), Single-molecule spectroscopy, Stochastic optical reconstruction microscopy (storm)

Cooperative behaviour of sperm is one of the mechanisms that plays a role in sperm competition. It has been observed in several species that spermatozoa interact with each other to form agglomerates or bundles. In this study, we investigate the effect of physical and biochemical factors that will most likely promote bundle formation in bull sperm. These factors include fluid viscosity, swim-up process, post-thaw incubation time and media additives which promote capacitation. While viscosity does not seem to influence the degree of sperm bundling, swim-up, post-thaw migration time and suppressed capacitation increase the occurrence of sperm bundles. This leads to the conclusion that sperm bundling is a result of hydrodynamic and adhesive interactions between the cells which occurs frequently during prolonged incubation times.Copyright © 2022 Morcillo i Soler, Hidalgo, Fekete, Zalanyi, Khalil, Yeste and Magdanz.

JTD Keywords: acrosome reaction, adhesion, bundling, capacitation, cell-cell interaction, cooperation, cooperative behaviour, fertilization, mammals, membrane, motility, progesterone, sperm competition, sperm migration, sperm selection, Bovine spermatozoa, Bundling, Cell-cell interaction, Cooperative behaviour, Sperm competition, Sperm migration, Sperm selection, Spermatozoa

Upon the initiation of collective cell migration, the cells at the free edge are specified as leader cells; however, the mechanism underlying the leader cell specification remains elusive. Here, we show that lamellipodial extension after the release from mechanical confinement causes sustained extracellular signal-regulated kinase (ERK) activation and underlies the leader cell specification. Live-imaging of Madin-Darby canine kidney (MDCK) cells and mouse epidermis through the use of Förster resonance energy transfer (FRET)-based biosensors showed that leader cells exhibit sustained ERK activation in a hepatocyte growth factor (HGF)-dependent manner. Meanwhile, follower cells exhibit oscillatory ERK activation waves in an epidermal growth factor (EGF) signaling-dependent manner. Lamellipodial extension at the free edge increases the cellular sensitivity to HGF. The HGF-dependent ERK activation, in turn, promotes lamellipodial extension, thereby forming a positive feedback loop between cell extension and ERK activation and specifying the cells at the free edge as the leader cells. Our findings show that the integration of physical and biochemical cues underlies the leader cell specification during collective cell migration.Copyright © 2022 Elsevier Inc. All rights reserved.

JTD Keywords: activation, c-met, contact inhibition, focal adhesions, heparan-sulfate, mechanical forces, morphogenesis, rho, stress fibers, Collective cell migration, Erk, Feedback regulation, Fret, Growth-factor receptor, Hgf, Lamellipodia, Leader cell specification, Signal transduction, Traction force, Wound healing

Tauopathies are a group of neurodegenerative diseases characterized by the hyperphosphorylation and deposition of tau proteins in the brain. In Alzheimer's disease, and other related tauopathies, the pattern of tau deposition follows a stereotypical progression between anatomically connected brain regions. Increasing evidence suggests that tau behaves in a "prion-like" manner, and that seeding and spreading of pathological tau drive progressive neurodegeneration. Although several advances have been made in recent years, the exact cellular and molecular mechanisms involved remain largely unknown. Since there are no effective therapies for any tauopathy, there is a growing need for reliable experimental models that would provide us with better knowledge and understanding of their etiology and identify novel molecular targets. In this review, we will summarize the development of cellular models for modeling tau pathology. We will discuss their different applications and contributions to our current understanding of the "prion-like" nature of pathological tau.

JTD Keywords: neurodegeneration, seeding, spreading, Culture model, Efficient generation, Extracellular tau, Familial alzheimers-disease, Microtubule-associated protein, Mouse model, Neurodegeneration, Neurofibrillary tangles, Paired helical filaments, Pathogenic tau, Pluripotent stem-cells, Seeding, Spreading, Tauopathies

Cell-material interactions are regulated by mimicking bone extracellular matrix on the surface of biomaterials. In this regard, reproducing the extracellular conditions that promote integrin and growth factor (GF) signaling is a major goal to trigger bone regeneration. Thus, the use of synthetic osteogenic domains derived from bone morphogenetic protein 2 (BMP-2) is gaining increasing attention, as this strategy is devoid of the clinical risks associated with this molecule. In this work, the wrist and knuckle epitopes of BMP-2 are screened to identify peptides with potential osteogenic properties. The most active sequences (the DWIVA motif and its cyclic version) are combined with the cell adhesive RGD peptide (linear and cyclic variants), to produce tailor-made biomimetic peptides presenting the bioactive cues in a chemically and geometrically defined manner. Such multifunctional peptides are next used to functionalize titanium surfaces. Biological characterization with mesenchymal stem cells demonstrates the ability of the biointerfaces to synergistically enhance cell adhesion and osteogenic differentiation. Furthermore, in vivo studies in rat calvarial defects prove the capacity of the biomimetic coatings to improve new bone formation and reduce fibrous tissue thickness. These results highlight the potential of mimicking integrin-GF signaling with synthetic peptides, without the need for exogenous GFs.© 2022 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.

JTD Keywords: adhesion formation, bmp-2, cell adhesions, in-vivo, integrin, mesenchymal stem-cells, morphogenetic protein-2, multifunctionality, osteoblastic differentiation, osteogenic differentiation, rgd-dwiva, rgd-peptides, titanium biofunctionalization, titanium surfaces, Animals, Biocompatible materials, Biomimetic peptides, Bone morphogenetic protein 2, Bone regeneration, Cell adhesions, Cell differentiation, Epitopes, Extracellular matrix, Integrins, Marrow stromal cells, Multifunctionality, Osteogenesis, Osteogenic differentiation, Peptides, Rats, Rgd-dwiva, Titanium, Titanium biofunctionalization

When danger is perceived, the human body responds to overcome obstacles and survive a stressful situation; however, sustained levels of stress are associated with health disorders and diminished life quality. Hence, stress biomarkers are monitored to control stress quantitatively. Herein, a porous sensor (4l-COP/p) composed of poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(3,4-ethylenedioxythiophene-co-N-methylpyrrole) (COP), which is prepared in a four-layered fashion to detect dopamine (DA) and serotonin (5-HT), is presented. Specifically, the detection is conducted in phosphate-buffered saline (PBS), as well as artificial urine and sweat, by applying cyclic voltammetry. The limit of detection values obtained are as low as 5.7 x 10(-6) and 1.4 x 10(-6) m for DA and 5-HT, respectively, when assessed individually in artificial urine. When mixed in PBS, 4l-COP/p detects both biomarkers with a resolution of 0.18 V and a sensitivity of 40 and 30 mu A mm(-1) for DA and 5-HT, respectively. Additionally, by theoretical calculations, the interaction pattern that each stress biomarker establishes with the PEDOT outer layer is elucidated. Whereas DA interacts with the pi-system of PEDOT, 5-HT forms specific hydrogen bonds with the conducting polymer chains. The resolution value obtained depends upon such interactions. Overall, 4l-COP/p electrodes display potential as stress sensing devices for healthcare technologies.

JTD Keywords: Artificial body fluids, Boron-doped diamond, Cortisol, Cyclic voltammetry, Dopamine, Multilayered films, Paper, Saliva, Selective detection, Sensor, Sensors, Serotonin, Serum

Chronic obstructive pulmonary disease (COPD) requires a multifactorial assessment, evaluating the airflow limitation and symptoms of the patients. The 6-min walk test (6MWT) is commonly used to evaluate the functional exercise capacity in these patients. This study aims to propose a novel predictive model of the major 6MWT outcomes for COPD assessment, without physical performance measurements.Cardiopulmonary and clinical parameters were obtained from fifty COPD patients. These parameters were used as inputs of a Bayesian network (BN), which integrated three multivariate models including the 6-min walking distance (6MWD), the maximum HR (HRmax) after the walking, and the HR decay 3 min after (HRR3). The use of BN allows the assessment of the patients' status by predicting the 6MWT outcomes, but also inferring disease severity parameters based on actual patient's 6MWT outcomes.Firstly, the correlation obtained between the estimated and actual 6MWT measures was strong (R = 0.84, MAPE = 8.10% for HRmax) and moderate (R = 0.58, MAPE = 15.43% for 6MWD and R = 0.58, MAPE = 32.49% for HRR3), improving the classical methods to estimate 6MWD. Secondly, the classification of disease severity showed an accuracy of 78.3% using three severity groups, which increased up to 84.4% for two defined severity groups.We propose a powerful two-way assessment tool for COPD patients, capable of predicting 6MWT outcomes without the need for an actual walking exercise. This model-based tool opens the way to implement a continuous monitoring system for COPD patients at home and to provide more personalized care.Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.

JTD Keywords: 6mwt, bayesian networks, copd, distance, exercise capacity, physical capacity, reference equations, severity, survival, wearables, 6mwt, Bayes theorem, Bayesian networks, Copd, Exercise test, Exercise tolerance, Heart-rate recovery, Humans, Physical capacity, Physical functional performance, Pulmonary disease, chronic obstructive, Walking, Wearables

Chemically responsive polymers are macromolecules that respond to local variations of the chemical composition of the solution by changing their conformation, with notable examples including polyelectrolytes, proteins, and DNA. The polymer conformation changes can occur in response to changes in the pH, the ionic strength, or the concentration of a generic solute that interacts with the polymer. These chemical stimuli can lead to drastic variations of the polymer flexibility and even trigger a transition from a coil to a globule polymer conformation. In many situations, the spatial distribution of the chemical stimuli can be highly inhomogeneous, which can lead to large spatial variations of polymer conformation and of the rheological properties of the mixture. In this paper, we develop a theory for the flow of a mixture of solute and chemically responsive polymers. The approach is valid for generic flows and inhomogeneous distributions of polymers and solutes. To model the polymer conformation changes introduced by the interactions with the solute, we consider the polymers as linear elastic dumbbells whose spring stiffness depends on the solute concentration. We use Onsager's variational formalism to derive the equations governing the evolution of the variables, which unveils novel couplings between the distribution of dumbbells and that of the solute. Finally, we use a linear stability analysis to show that the governing equations predict an equilibrium phase separation and a distinct shear-induced phase separation whereby a homogeneous distribution of solute and dumbbells spontaneously demix. Similar phase transitions have been observed in previous experiments using stimuli-responsive polymers and may play an important role in living systems. (C) 2022 The Society of Rheology.

JTD Keywords: Coil-globule transition, Constitutive equation, Dilute-solutions, Dumbbell model, Dynamics, Macromolecules, Nonequilibrium thermodynamics, Polyelectrolytes, Polymer migration, Polymer phase separation, Polymers, Predictions, Rheology, Shear-induced phase separation, Solute-polymer interactions, Stress, Viscoelasticity

Although alginate is widely used as a matrix in the formulation of cell-laden inks, this polymer often requires laborious processing strategies due to its lack of cell adhesion moieties. The main objective of the present work was to explore the incorporation of microspheres into alginate-based bioinks as a simple and tuneable way to solve the cell adhesion problems, while adding extra biological functionality and improving their mechanical properties. To this end, three types of microspheres with different mineral contents (i.e. gelatine with 0% of hydroxyapatite, gelatine with 25 wt% of hydroxyapatite nanoparticles and 100 wt% of calcium -deficient hydroxyapatite) were synthesised and incorporated into the formulation of cell-laden inks. The results showed that the addition of microspheres generally improved the rheological properties of the ink, favoured cell proliferation and positively affected osteogenic cell differentiation. Furthermore, this differentiation was found to be influenced by the type of microsphere and the ability of the cells to migrate towards them, which was highly dependent on the stiffness of the bioink. In this regard, Ca2+ supplementation in the cell culture medium had a pronounced effect on the relaxation of the stiffness of these cell-loaded inks, influencing the overall cell performance. In conclusion, we have developed a powerful and tuneable strategy for the fabrication of alginate-based bioinks with enhanced biological characteristics by incorporating microspheres into the initial ink formulation.; [GRAPHICS]; .

JTD Keywords: 3d bioprinting, alginate, bioink, gelatine, hydroxyapatite, 3d bioprinting, Alginate, Behavior, Bioink, Cell-culture, Gelatin, Gelatine, Hydrogels, Hydroxyapatite, Laden, Microspheres, Mineralization, Scaffolds

Nanoparticles represent a promising class of material for nanomedicine and molecular biosensing. The formation of a protein corona due to nonspecific particle-protein interactions is a determining factor for the biological fate of nanoparticles in vivo and strongly impacts the performance of nanoparticles when used as biosensors. Nonspecific interactions are usually highly heterogeneous, yet little is known about the heterogeneity of the protein corona that may lead to inter- and intraparticle differences in composition and protein distribution. Here, we present a super-resolution microscopic approach to study the protein corona on single silica nanoparticles and subsequent cellular interactions using multicolor stimulated emission depletion (STED) microscopy. We demonstrate that STED resolves structural features of protein corona on single particles including the distribution on the particle surface and the degree of protein internalization in porous particles. Using multicolor measurements of multiple labeled protein species, we determine the composition of the protein corona at the single-particle level. We quantify particle-to-particle differences in the composition and find that the composition is considerably influenced by the particle geometry. In a subsequent cellular uptake measurement, we demonstrate multicolor STED of protein corona on single particles internalized by cells. Our study shows that STED microscopy opens the window toward mechanistic understanding of protein coronas and aids in the rational design of nanoparticles as nanomedicines and biosensors.

JTD Keywords: insights, multicolor microscopy, nanoparticles, protein corona, quantification, size, sted microscopy, Fluorescence, Quantification, Sted microscopy

Nature has inspired the creation of artificial micro- and nanomotors that self-propel converting chemical energy into mechanical action. These tiny machines have appeared as promising biomedical tools for treatment and diagnosis and have also been used for environmental, antimicrobial or sensing applications. Among the possible catalytic engines, enzymes have emerged as an alternative to inorganic catalysts due to their biocompatibility and the variety and bioavailability of fuels. Although the field of enzyme-powered micro- and nano-motors has a trajectory of more than a decade, a comprehensive framework on how to rationally design, control and optimize their motion is still missing. With this purpose, herein we performed a thorough bibliographic study on the key parameters governing the propulsion of these enzyme-powered devices, namely the chassis shape, the material composition, the motor size, the enzyme type, the method used to incorporate enzymes, the distribution of the product released, the motion mechanism, the motion media and the technique used for motion detection. In conclusion, from the library of options that each parameter offers there needs to be a rational selection and intelligent design of enzymatic motors based on the specific application envisioned.

JTD Keywords: Catalase, Hydrogen-peroxide, Micro/nanomotors, Micromotors, Movement, Nanomotors, Propulsion, Surfactants, Therapy, Tumor microenvironment

Gene duplications occur in prokaryotic genomes at a detectable frequency. In many instances, the biological function of the duplicates is unknown, and hence, the significance of the presence of multiple copies of these genes remains unclear.; Gene duplications significantly impact the gene repertoires of both eukaryotic and prokaryotic microorganisms. The genomes of pathogenic Escherichia coli strains share a group of duplicated genes whose function is mostly unknown. The irmA gene is one of the duplicates encoded in several pathogenic E. coli strains. The function of its gene product was investigated in the uropathogenic E. coli strain CFT073, which contains a single functional copy. The IrmA protein structure mimics that of human interleukin receptors and likely plays a role during infection. The enteroaggregative E. coli strain 042 contains two functional copies of the irmA gene. In the present work, we investigated their biological roles. The irmA_4509 allele is expressed under several growth conditions. Its expression is modulated by the global regulators OxyR and Hha, with optimal expression at 37 degrees C and under nutritional stress conditions. Expression of the irmA_2244 allele can only be detected when the irmA_4509 allele is knocked out. Differences in the promoter regions of both alleles account for their differential expression. Our results show that under several environmental conditions, the expression of the IrmA protein in strain 042 is dictated by the irmA_4509 allele. The irmA_2244 allele appears to play a backup role to ensure IrmA expression when the irmA_4509 allele loses its function. IMPORTANCE Gene duplications occur in prokaryotic genomes at a detectable frequency. In many instances, the biological function of the duplicates is unknown, and hence, the significance of the presence of multiple copies of these genes remains unclear. In pathogenic E. coli isolates, the irmA gene can be present either as a single copy or in two or more copies. We focused our work on studying why a different pathogenic E. coli strain encodes two functional copies of the irmA gene. We show that under several environmental conditions, one of the alleles dictates IrmA expression, and the second remains silent. The latter allele is only expressed when the former is silenced. The presence of more than one functional copy of the irmA gene in some pathogenic E. coli strains can result in sufficient expression of this virulence factor during the infection process.

JTD Keywords: 042, aec69, enteroaggregative e. coli, gene duplications, 042, Adaptation, Aec69, Aggregative adherence, Alleles, Chromosomal genes, Coli, Duplication, Enteroaggregative e, Enteroaggregative e. coli, Escherichia coli infections, Escherichia coli proteins, Escherichia-coli, Evolution, Gene duplications, Hha/ymoa, Humans, Irma, Mechanism, Outer-membrane, Protein, Uropathogenic escherichia coli

Peptide derivatives and, most specifically, their self-assembled supramolecular structures are being considered in the design of novel biofunctional materials. Although the self-assembly of triphenylalanine homopeptides has been found to be more versatile than that of homopeptides containing an even number of residues (i.e. diphe-nylalanine and tetraphenylalanine), only uncapped triphenylalanine (FFF) and a highly aromatic analog blocked at both the N-and C-termini with fluorenyl-containing groups (Fmoc-FFF-OFm), have been deeply studied before. In this work, we have examined the self-assembly of a triphenylalanine derivative bearing 9-fluorenylme-thyloxycarbonyl and benzyl ester end-capping groups at the N-and C-termini, respectively (Fmoc-FFF-OBzl). The antiparallel arrangement clearly dominates in beta-sheets formed by Fmoc-FFF-OBzl, whereas the parallel and antiparallel dispositions are almost isoenergetic in Fmoc-FFF-OFm beta-sheets and the parallel one is slightly favored for FFF. The effects of both the peptide concentration and the mediu m on the self-assembly process have been examined considering Fmoc-FFF-OBzl solutions in a wide variety of solvent:co-solvent mixtures. In addi-tion, Fmoc-FFF-OBzl supramolecular structures have been compared to those obtained for FFF and Fmoc-FFF-OFm under identical experimental conditions. The strength of pi-pi stacking interactions involving the end-capping groups plays a crucial role in the nucleation and growth of supramolecular structures, which de-termines the resulting morphology. Finally, the influence of a non-invasive external stimulus, ultrasounds, on the nucleation and growth of supramolecular structures has been examined. Overall, FFF-based peptides provide a wide range of supramolecular structures that can be of interest in the biotechnological field.

JTD Keywords: aromatic interactions, beta-sheet, hierarchical structures, phenylalanine homopeptides, supramolecular structures, Amino-acids, Aromatic interactions, Beta-sheet, Dipeptides, Diphenylalanine, Fmoc, Hierarchical struc tures, Hierarchical structures, Hydrogels, Peptides, Phenylalanine, Phenylalanine homopeptides, Solvent, Solvents, Spectroscopy, Supramolecular structures, Triphenylalanine

Chronic use of cannabis leads to both motor deficits and the downregulation of CB1 receptors (CB1R) in the cerebellum. In turn, cerebellar damage is often related to impairments in motor learning and control. Further, a recent motor learning task that measures cerebellar-dependent adaptation has been shown to distinguish well between healthy subjects and chronic cannabis users. Thus, the deteriorating effects of chronic cannabis use in motor performance point to cerebellar adaptation as a key process to explain such deficits. We review the literature relating chronic cannabis use, the endocannabinoid system in the cerebellum, and different forms of cerebellar-dependent motor learning, to suggest that CB1R downregulation leads to a generalized underestimation and misprocessing of the sensory errors driving synaptic updates in the cerebellar cortex. Further, we test our hypothesis with a computational model performing a motor adaptation task and reproduce the behavioral effect of decreased implicit adaptation that appears to be a sign of chronic cannabis use. Finally, we discuss the potential of our hypothesis to explain similar phenomena related to motor impairments following chronic alcohol dependency. © 2022

JTD Keywords: adaptation, addiction, alcohol-abuse, cerebellum, chronic cannabis use, cognition, deficits, endocannabinoid system, error processing, explicit, modulation, motor learning, release, synaptic plasticity, Adaptation, Adaptation, physiological, Alcoholism, Article, Behavioral science, Cannabinoid 1 receptor, Cannabis, Cannabis addiction, Cerebellum, Cerebellum cortex, Cerebellum disease, Chronic cannabis use, Computer model, Down regulation, Endocannabinoid, Endocannabinoid system, Endocannabinoids, Error processing, Hallucinogens, Human, Humans, Motor dysfunction, Motor learning, Nerve cell plasticity, Nonhuman, Physiology, Psychedelic agent, Purkinje-cells, Regulatory mechanism, Sensation, Sensory dysfunction, Sensory error processing impairment, Synaptic transmission, Task performance

Yeast genetics made it possible to derive the first fundamental insights into prion composition, conformation, and propagation. Fast-forward 30 years and the same model organism is now proving an extremely powerful tool to comprehensively explore the impact of mutations in prion sequences on their function, toxicity, and physical properties. Here, we provide an overview of novel multiplexed strategies where deep mutagenesis is combined to a range of tailored selection assays in yeast, which are particularly amenable for investigating prions and prion-like sequences. By mimicking evolution in a flask, these multiplexed approaches are revealing mechanistic insights on the consequences of prion self-assembly, while also reporting on the structure prion sequences adopt in vivo.Copyright © 2022 Elsevier Ltd. All rights reserved.

JTD Keywords: aggregation, appearance, domains, inheritance, mutations, nucleation, physical basis, propagation, protein, Phase-separation

JTD Keywords: coordination, embodied cognition, human-robot interaction, sensorimotor coupling, Coordination, Embodied cognition, Human-robot interaction, Sensorimotor coupling, Social cognition

The extracellular matrix protects biofilm cells by reducing diffusion of antimicrobials. Tobramycin is an antibiotic used extensively to treat P. aeruginosa biofilms, but it is sequestered in the biofilm periphery by the extracellular negative charge matrix and loses its efficacy significantly. Dispersal of the biofilm extracellular matrix with enzymes such as DNase I is another promising therapy that enhances antibiotic diffusion into the biofilm. Here, we combine the charge neutralization of tobramycin provided by dextran-based single-chain polymer nanoparticles (SCPNs) together with DNase I to break the biofilm matrix. Our study demonstrates that the SCPNs improve the activity of tobramycin and DNase I by neutralizing the ionic interactions that keep this antibiotic in the biofilm periphery. Moreover, the detailed effects and interactions of nanoformulations with extracellular matrix components were revealed through time-lapse imaging of the P. aeruginosa biofilms by laser scanning confocal microscopy with specific labeling of the different biofilm components.

JTD Keywords: Cystic-fibrosis sputum, Delivery, Extracellular dna, Infections, Pseudomonas-aeruginosa, Transport

Type 1 Diabetes results from autoimmune response elicited against β-cell antigens. Nowadays, insulin injections remain the leading therapeutic option. However, injection treatment fails to emulate the highly dynamic insulin release that β-cells provide. 3D cell-laden microspheres have been proposed during the last years as a major platform for bioengineering insulin-secreting constructs for tissue graft implantation and a model for in vitro drug screening platforms. Current microsphere fabrication technologies have several drawbacks: the need for an oil phase containing surfactants, diameter inconsistency of the microspheres, and high time-consuming processes. These technologies have widely used alginate for its rapid gelation, high processability, and low cost. However, its low biocompatible properties do not provide effective cell attachment. This study proposes a high-throughput methodology using a 3D bioprinter that employs an ECM-like microenvironment for effective cell-laden microsphere production to overcome these limitations. Crosslinking the resulting microspheres with tannic acid prevents collagenase degradation and enhances spherical structural consistency while allowing the diffusion of nutrients and oxygen. The approach allows customization of microsphere diameter with extremely low variability. In conclusion, a novel bio-printing procedure is developed to fabricate large amounts of reproducible microspheres capable of secreting insulin in response to extracellular glucose stimuli.© 2022 The Authors. Advanced Materials Technologies published by Wiley‐VCH GmbH.

JTD Keywords: 3d bioprinter, beta-cell, biomaterial, collagen, encapsulation, mechanics, microspheres, survival, 3d bioprinter, ?-cell, Advanced material technologies, Biocompatibility, Cell encapsulations, Cells, Collagen, Cross-linking, Cytology, Drug delivery, Encapsulation, Fabrication, Flavonoids, Gelation, In-vitro, Insulin injections, Insulin release, Microspheres, Tannic acid, Tannins, Throughput, Tissue grafts, Type 1 diabetes, Β‐cell

Effective inhibition of sperm motility using a spermicide can be a promising approach in developing non-invasive male contraceptive agents. Copper is known to have contraceptive properties and has been used clinically for decades as intrauterine contraceptive devices (IUDs) for contraception in females. Beyond that, the spermicidal use of copper is not explored much further, even though its use can also subdue the harmful effects caused by the hormonal female contraceptive agents on the environment. Herein, the size, concentration, and time-dependent in vitro inhibition of bovine spermatozoa by copper microparticles are studied. The effectivity in inhibiting sperm motility is correlated with the amount of Cu2+ ions released by the particles during incubation. The copper particles cause direct suppression of sperm motility and viability upon incubation and thereby show potential as sperm-inhibiting, hormone-free candidate for male contraception. In addition, biocompatibility tests using a cervical cell line help optimizing the size and concentration of the copper particles for the best spermicidal action while avoiding toxicity to the surrounding tissue.

JTD Keywords: Bovine spermatozoa, Clinical-trial, Copper, Human-spermatozoa, Ions, Male contraception, Metallic copper, Microparticles, Progestins, Sperm motility, Sperm viability, Spermicide, Viability

Technologies to cryogenically preserve (a.k.a. cryopreserve) living tissue, cell lines and primary cells have matured greatly for both clinicians and researchers since their first demonstration in the 1950s and are widely used in storage and transport applications. Currently, however, there remains an absence of viable cryopreservation and thawing methods for bioengineered, three-dimensional (3D) cell models, including patients' samples. As a first step towards addressing this gap, we demonstrate a viable protocol for spheroid cryopreservation and survival based on a 3D carboxymethyl cellulose scaffold and precise conditions for freezing and thawing. The protocol is tested using hepatocytes, for which the scaffold provides both the 3D structure for cells to self-arrange into spheroids and to support cells during freezing for optimal post-thaw viability. Cell viability after thawing is improved compared to conventional pellet models where cells settle under gravity to form a pseudo-tissue before freezing. The technique may advance cryobiology and other applications that demand high-integrity transport of pre-assembled 3D models (from cell lines and in future cells from patients) between facilities, for example between medical practice, research and testing facilities.

JTD Keywords: 3d cell culture, biofabrication, biomaterials, carboxymethyl cellulose, cryopreservation, hepatocytes, 3d cell culture, Biofabrication, Biomaterials, Carboxymethyl cellulose, Cell culture techniques, three dimensional, Cell survival, Cryopreservation, Freezing, Hepatocytes, Humans, Prevention, Scaffolds, Spheroids

We investigated the diffusion of three cyclic boronates formulated as beta-lactamase inhibitors through the porin OmpF to evaluate their potential to cross OM via the porin pathway. The three nonbeta-lactam molecules diffuse through the porin eyelet region with the same mechanism observed for beta-lactam molecules and diazobicyclooctan derivatives, with the electric dipole moment aligned with the transversal electric field. In particular, the BOH group can interact with both the basic ladder and the acidic loop L3, which is characteristic of the size-constricted region of this class of porins. On one hand, we confirm that the transport of small molecules through enterobacter porins has a common general mechanism; on the other, the class of cyclic boronate molecules does not seem to have particular difficulties in diffusing through enterobacter porins, thus representing a good scaffold for new anti-infectives targeting Gram-negative bacteria research.

JTD Keywords: beta-lactamase inhibitors, cyclic boronates, diffusion current, metadynamics, molecular dynamics simulations, permeation, Antibiotics, Beta-lactamase inhibitors, Cyclic boronates, Diffusion, Diffusion current, Discovery, Electric-field, Metadynamics, Molecular dynamics simulations, Molecular-dynamics simulations, Nanopores, Permeability, Permeation, Porins, Rules, Translocation

This study explored the use of parasternal second intercostal space and lower intercostal space surface electromyogram (sEMG) and surface mechanomyogram (sMMG) recordings (sEMGpara and sMMGpara, and sEMGlic and sMMGlic, respectively) to assess neural respiratory drive (NRD), neuromechanical (NMC) and neuroventilatory (NVC) coupling, and mechanical efficiency (MEff) noninvasively in healthy subjects and chronic obstructive pulmonary disease (COPD) patients. sEMGpara, sMMGpara, sEMGlic, sMMGlic, mouth pressure (Pmo), and volume (Vi) were measured at rest, and during an inspiratory loading protocol, in 16 COPD patients (8 moderate and 8 severe) and 9 healthy subjects. Myographic signals were analyzed using fixed sample entropy and normalized to their largest values (fSEsEMGpara%max, fSEsMMGpara%max, fSEsEMGlic%max, and fSEsMMGlic%max). fSEsMMGpara%max, fSEsEMGpara%max, and fSEsEMGlic%max were significantly higher in COPD than in healthy participants at rest. Parasternal intercostal muscle NMC was significantly higher in healthy than in COPD participants at rest, but not during threshold loading. Pmo-derived NMC and MEff ratios were lower in severe patients than in mild patients or healthy subjects during threshold loading, but differences were not consistently significant. During resting breathing and threshold loading, Vi-derived NVC and MEff ratios were significantly lower in severe patients than in mild patients or healthy subjects. sMMG is a potential noninvasive alternative to sEMG for assessing NRD in COPD. The ratios of Pmo and Vi to sMMG and sEMG measurements provide wholly noninvasive NMC, NVC, and MEff indices that are sensitive to impaired respiratory mechanics in COPD and are therefore of potential value to assess disease severity in clinical practice. Author

JTD Keywords: biomedical measurement, chronic obstructive pulmonary disease, couplings, diaphragm, disease severity, efficiency, electromyography, exacerbations, healthy volunteers, inspiratory muscles, loading, mechanomyography, obstructive pulmonary-disease, pressure measurement, protocols, respiratory mechanics, respiratory muscles, responsiveness, spirometry, stimulation, volume measurement, At rests, Biomedical measurement, Biomedical measurements, Chronic obstructive pulmonary disease, Couplings, Disease severity, Efficiency ratio, Electromyography, Healthy subjects, Healthy volunteers, Loading, Mechanical efficiency, Mechanomyogram, Muscle, Muscles, Neural respiratory drive, Noninvasive medical procedures, Pressure measurement, Protocols, Pulmonary diseases, Surface electromyogram, Volume measurement

Biological adhesion is a critical mechanical function of complex organisms. At the scale of cell-cell contacts, adhesion is remarkably tunable to enable both cohesion and malleability during development, homeostasis and disease. It is physically supported by transient and laterally mobile molecular bonds embedded in fluid membranes. Thus, unlike specific adhesion at solid-solid or solid-fluid interfaces, peeling at fluid-fluid interfaces can proceed by breaking bonds, by moving bonds or by a combination of both. How the additional degree of freedom provided by bond mobility changes the mechanics of peeling is not understood. To address this, we develop a theoretical model coupling diffusion, reactions and mechanics. Mobility and reaction rates determine distinct peeling regimes. In a diffusion-dominated Stefan-like regime, bond motion establishes self-stabilizing dynamics that increase the effective fracture energy. In a reaction-dominated regime, peeling proceeds by travelling fronts where marginal diffusion and unbinding control peeling speed. In a mixed reaction-diffusion regime, strengthening by bond motion competes with weakening by bond breaking in a force-dependent manner, defining the strength of the adhesion patch. In turn, patch strength depends on molecular properties such as bond stiffness, force sensitivity or crowding. We thus establish the physical rules enabling tunable cohesion in cellular tissues and in engineered biomimetic systems.

JTD Keywords: cell–cell adhesion, peeling, Adhesive contact, Cadherins, Cell-cell adhesion, Detachment, Detailed mechanics, Diffusion, Growth, Kinetics, Peeling, Red-blood-cells, Repulsion, Separation, Vesicle adhesion

Background: There is a pressing need for scalable healthcare solutions and a shift in the rehabilitation paradigm from hospitals to homes to tackle the increase in stroke incidence while reducing the practical and economic burden for patients, hospitals, and society. Digital health technologies can contribute to addressing this challenge; however, little is known about their effectiveness in at-home settings. In response, we have designed the RGS@home study to investigate the effectiveness, acceptance, and cost of a deep tech solution called the Rehabilitation Gaming System (RGS). RGS is a cloud-based system for delivering Al-enhanced rehabilitation using virtual reality, motion capture, and wearables that can be used in the hospital and at home. The core principles of the brain theory-based RGS intervention are to deliver rehabilitation exercises in the form of embodied, goal-oriented, and task-specific action.; Methods: The RGS@home study is a randomized longitudinal clinical trial designed to assess whether the combination of the RGS intervention with standard care is superior to standard care alone for the functional recovery of stroke patients at the hospital and at home. The study is conducted in collaboration with hospitals in Spain, Sweden, and France and includes inpatients and outpatients at subacute and chronic stages post-stroke. The intervention duration is 3 months with assessment at baseline and after 3, 6, and 12 months. The impact of RGS is evaluated in terms of quality of life measurements, usability, and acceptance using standardized clinical scales, together with health economic analysis. So far, one-third of the patients expected to participate in the study have been recruited (N = 90, mean age 60, days after stroke >= 30 days). The trial will end in July 2023.; Discussion: We predict an improvement in the patients' recovery, high acceptance, and reduced costs due to a soft landing from the clinic to home rehabilitation. In addition, the data provided will allow us to assess whether the prescription of therapy at home can counteract deterioration and improve quality of life while also identifying new standards for online and remote assessment, diagnostics, and intervention across European hospitals.

JTD Keywords: deep tech, e-health, home treatment, motor recovery, randomized clinical trial, stroke, upper extremities, virtual reality, Deep tech, E-health, Functional recovery, Home treatment, Humans, Middle aged, Motor recovery, Quality of life, Randomized clinical trial, Randomized controlled trials as topic, Recovery of function, Stroke, Stroke rehabilitation, Telemedicine, Upper extremities, Virtual reality, Wearables

We introduce a novel mesoscopic computational model based on a multiphase-multicomponent lattice Boltzmann method for the simulation of self-phoretic particles in the presence of liquid-liquid interfaces. Our model features fully resolved solvent hydrodynamics, and, thanks to its versatility, it can handle important aspects of the multiphysics of the problem, including particle wettability and differential solubility of the product in the two liquid phases. The method is extensively validated in simple numerical experiments, whose outcome is theoretically predictable, and then applied to the study of the behavior of active particles next to and trapped at interfaces. We show that their motion can be variously steered by tuning relevant control parameters, such as the phoretic mobilities, the contact angle, and the product solubility. Published under an exclusive license by AIP Publishing.

JTD Keywords: Colloids, Equation, Gas, Numerical simulations, Particulate suspensions

It is not well understood why diabetic individuals are more prone to develop severe COVID-19. To this, we here established a human kidney organoid model promoting early hallmarks of diabetic kidney disease development. Upon SARS-CoV-2 infection, diabetic-like kidney organoids exhibited higher viral loads compared with their control counterparts. Genetic deletion of the angiotensin-converting enzyme 2 (ACE2) in kidney organoids under control or diabetic-like conditions prevented viral detection. Moreover, cells isolated from kidney biopsies from diabetic patients exhibited altered mitochondrial respiration and enhanced glycolysis, resulting in higher SARS-CoV-2 infections compared with non-diabetic cells. Conversely, the exposure of patient cells to dichloroacetate (DCA), an inhibitor of aerobic glycolysis, resulted in reduced SARS-CoV-2 infections. Our results provide insights into the identification of diabetic-induced metabolic programming in the kidney as a critical event increasing SARS-CoV-2 infection susceptibility, opening the door to the identification of new interventions in COVID-19 pathogenesis targeting energy metabolism.Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.

JTD Keywords: complications, coronavirus, cultured-cells, disease, distal tubule, mouse, protein, reveals, spike, Ace2, Ace2 protein, human, Angiotensin-converting enzyme 2, Angiotensin-converting enzyme-2, Covid-19, Diabetes 2, Diabetes mellitus, Diabetic nephropathies, Human kidney organoids, Humans, Kidney, Organoids, Peptidyl-dipeptidase a, Sars-cov-2

Tuning of the crosslink density (CLD) in the rubber compounds is very crucial for optimizing the physical and mechanical properties of the ultimate rubber products. Conventionally, CLD can be measured via rheological methods such as moving die rheometer (MDR), via mechanical tests such as temperature scanning stress relaxation analysis (TSSR), or via direct swelling experiments using Flory–Rehner approach. In the current study, two novel techniques, focused ion beam - scanning electron microscopy (FIB-SEM) processing, with simultaneous energy dispersive X-ray spectrometry (EDS) mapping analysis and scanning acoustic microscopy (SAM) were combined and correlated to conventional methods on a model recipe of ethylene propylene diene monomer (EPDM) compound having different sulphur contents. Depending on the applied technique, the increase in the crosslink density with sulphur content was found to be 1.7 fold for the Flory–Rehner approach and 1.2 fold for both TSSR and MDR. It is directly monitored from the FIB-SEM-EDS analysis that the sulphur distribution and agglomeration behavior increased in line with ZnO content, which is an indirect indication of the rise in crosslink density. The impedance maps of the crosslinked samples obtained through SAM analysis revealed that the impedance of the samples increased with the increasing sulphur content, which can be attributed to higher level of crosslink density. A quantified correlation was obtained between SAM images and the crosslink density of the samples. It was shown that SAM is a promising tool for practical and non-destructive analysis for determining the formation of crosslink density of the rubbers. © The Author(s) 2022.

JTD Keywords: blends, compressibility, crosslink density, cure characteristics, ethylene propylene diene monomer, focused ion beam, mechanical-properties, morphology, natural-rubber, particles, scanning acoustic microscopy, scanning electron microscopy, sulfur, thermal-stability, vulcanization, Composite soft materials, Cross-link densities, Crosslink density, Crosslinking, Density (specific gravity), Ethylene, Ethylene propylene diene monomer, Flory-rehner, Focused ion beam - scanning electron microscopy, Focused ion beam-scanning electron microscopies, Ii-vi semiconductors, Monomers, Moving die rheometers, Physical and mechanical properties, Propylene, Relaxation analysis, Rubber, Scanning acoustic microscopy, Scanning electron microscopy, Stress relaxation, Sulfur contents, Temperature scanning stress relaxations, Zinc oxide

Heterotopic ossification (HO) is a condition triggered by an injury leading to the formation of mature lamellar bone in extraskeletal soft tissues. Despite being a frequent complication of orthopedic and trauma surgery, brain and spinal injury, the etiology of HO is poorly understood. The aim of this study is to evaluate the hypothesis that a sustained local ionic homeostatic imbalance (SLIHI) created by mineral formation during tissue calcification modulates inflammation to trigger HO. This evaluation also considers the role SLIHI could play for the design of cell-free, drug-free osteoinductive bone graft substitutes. The evaluation contains five main sections. The first section defines relevant concepts in the context of HO and provides a summary of proposed causes of HO. The second section starts with a detailed analysis of the occurrence and involvement of calcification in HO. It is followed by an explanation of the causes of calcification and its consequences. This allows to speculate on the potential chemical modulators of inflammation and triggers of HO. The end of this second section is devoted to in vitro mineralization tests used to predict the ectopic potential of materials. The third section reviews the biological cascade of events occurring during pathological and material-induced HO, and attempts to propose a quantitative timeline of HO formation. The fourth section looks at potential ways to control HO formation, either acting on SLIHI or on inflammation. Chemical, physical, and drug-based approaches are considered. Finally, the evaluation finishes with a critical assessment of the definition of osteoinduction.

JTD Keywords: apatite, beta-tricalcium phosphate, bone, bone graft, bone morphogenetic protein, demineralized bone-matrix, experimental myositis-ossificans, extracellular calcium, heterotopic ossification, in-vitro, inflammation, multinucleated giant-cells, osteoinduction, spinal-cord-injury, total hip-arthroplasty, traumatic brain-injury, Apatite, Calcium-sensing receptor, Osteoinduction

The present work focuses on the computational study of the structural micro-organization of hydrogels based on collagen-like peptides (CLPs) in complex with Rose Bengal (RB). In previous studies, these hydrogels computationally and experimentally demonstrated that when RB was activated by green light, it could generate forms of stable crosslinked structures capable of regenerating biological tissues such as the skin and cornea. Here, we focus on the structural and atomic interactions of two collagen-like peptides (collagen-like peptide I (CLPI), and collagen-like peptide II, (CLPII)) in the presence and absence of RB, highlighting the acquired three-dimensional organization and going deep into the stabilization effect caused by the dye. Our results suggest that the dye could generate a ternary ground-state complex between collagen-like peptide fibers, specifically with positively charged amino acids (Lys in CLPI and Arg in CLPII), thus stabilizing ordered three-dimensional structures. The discoveries generated in this study provide the structural and atomic bases for the subsequent rational development of new synthetic peptides with improved characteristics for applications in the regeneration of biological tissues during photochemical tissue bonding therapies.

JTD Keywords: collagen-like peptide, crosslinking, molecular dynamics, qm/mm simulations, rose bengal, Anastomosis, Collagen-like peptide, Crosslinking, Green light, Mm simulations, Molecular dynamics, Molecular-dynamics, Photochemical tissue bonding therapies, Qm, Qm/mm simulations, Rose bengal

Altered protein phosphorylation is a major pathologic modification in tauopathies and Alzheimer's disease (AD) linked to abnormal tau fibrillar deposits in neurofibrillary tangles (NFTs) and pre-tangles and beta-amyloid deposits in AD. hTau transgenic mice, which express 3R and less 4R human tau with no mutations in a murine knock-out background, show increased tau deposition in neurons but not NFTs and pre-tangles at the age of nine months. Label-free (phospho)proteomics and SWATH-MS identified 2065 proteins in hTau and wild-type (WT) mice. Only six proteins showed increased levels in hTau; no proteins were down-regulated. Increased tau phosphorylation in hTau was detected at Ser199, Ser202, Ser214, Ser396, Ser400, Thr403, Ser404, Ser413, Ser416, Ser422, Ser491, and Ser494, in addition to Thr181, Thr231, Ser396/Ser404, but not at Ser202/Thr205. In addition, 4578 phosphopeptides (corresponding to 1622 phosphoproteins) were identified in hTau and WT mice; 64 proteins were differentially phosphorylated in hTau. Sixty proteins were grouped into components of membranes, membrane signaling, synapses, vesicles, cytoskeleton, DNA/RNA/protein metabolism, ubiquitin/proteasome system, cholesterol and lipid metabolism, and cell signaling. These results showed that over-expression of human tau without pre-tangle and NFT formation preferentially triggers an imbalance in the phosphorylation profile of specific proteins involved in the cytoskeletal-membrane-signaling axis.

JTD Keywords: cytoskeleton, htau, membrane, phosphorylation, synapsis, tau, Aggregation, Alzheimers-disease, Animal-models, Cytoskeleton, Htau, Membrane, Mice, Networks, Pathology, Phosphoproteome analysis, Phosphorylation, Synapsis, Tau, Tauopathies, Tauopathy

We studied how anisotropic proteins are orientationally ordered and change the radius of membrane tubes using mean-field theory with an orientation-dependent excluded volume interaction.

JTD Keywords: bar, density, driven, generation, inclusions, invagination, mechanisms, monte-carlo, tubulation, Mediated aggregation

Since the discovery that nanostructured surfaces were able to kill bacteria, many works have been published focusing on the design of nanopatterned surfaces with antimicrobial properties. Synthetic bone grafts, based on calcium phosphate (CaP) formulations, can greatly benefit from this discovery if adequate nanotopographies can be developed. However, CaP are reactive materials and experience ionic exchanges when placed into aqueous solutions which may in turn affect cell behaviour and complicate the interpretation of the bactericidal results. The present study explores the bactericidal potential of two nanopillared CaP prepared by hydrolysis of two different sizes of alpha-tricalcium phosphate (alpha-TCP) powders under biomimetic or hydrothermal conditions. A more lethal bactericidal response toward Pseudomonas aeruginosa (similar to 75% killing efficiency of adhered bacteria) was obtained from the hydrothermally treated CaP which consisted in a more irregular topography in terms of pillar size (radius: 20-60 nm), interpillar distances (100-1500 nm) and pillar distribution (pillar groups forming bouquets) than the biomimetically treated one (radius: 20-40 nm and interpillar distances: 50-200 nm with a homogeneous pillar distribution). The material reactivity was greatly influenced by the type of medium (nutrient-rich versus nutrient-free) and the presence or not of bacteria. A lower reactivity and superior bacterial attachment were observed in the nutrient-free medium while a lower attachment was observed for the nutrient rich medium which was explained by a superior reactivity of the material paired with the lower tendency of planktonic bacteria to adhere on surfaces in the presence of nutrients. Importantly, the ionic exchanges produced by the presence of materials were not toxic to planktonic cells. Thus, we can conclude that topography was the main contributor to mortality in the bacterial adhesion tests.

JTD Keywords: bactericidal, calcium deficient hydroxyapatite, calcium phosphates, nanopillars, pseudomonas aeruginosa, reactivity, Adhesion, Anti-bacterial agents, Antibacterial, Bacterial adhesion, Bactericidal, Biomaterials, Biomimetics, Calcium deficient hydroxyapatite, Calcium phosphates, Hydroxyapatite, In-vitro, Infections, Nanopillars, Nanostructures, Pseudomonas aeruginosa, Pseudomonas-aeruginosa, Reactivity, Recent progress, Silver, Topography, Transmission

Albumin has been used primarily as a plasma expander, since it leads to an increase in the circulating blood volume. Current generally recommended indications for albumin therapy in cirrhotic patients are the prevention of circulatory dysfunction after large-volume paracentesis, the prevention of hepatorenal syndrome (HRS) in patients with spontaneous bacterial peritonitis (SBP), and the management of HRS in combination with vasoconstrictors. Yet, new indications for albumin have been tested in the recent years and are outlined in this short review.New data show that albumin both supports the circulation and reduces systemic inflammation. In addition, to its oncotic function, it acts as an antioxidant, radical scavenger, and immune modulator. These nononcotic properties explain why long-term albumin administration in patients with decompensated cirrhosis may be useful in the prevention of associated complications (acute-on-chronic liver failure, infections). New data show that long-term albumin therapy in patients with cirrhosis and ascites improves survival, prevents complications, simplifies ascites management, and lowers hospitalization rates. The so-called disease-modifying effects of long-term albumin therapy may have a favorable effect on the course of the disease. Nevertheless, the optimal dosage and administration intervals have not yet been finally defined.Albumin therapy is effective in the indications already recommended by the guidelines. A possible extension of the indication for albumin administration in non-SBP infections and as long-term therapy is promising, but should be confirmed by further studies.Copyright © 2022 Wolters Kluwer Health, Inc. All rights reserved.

JTD Keywords: ascites, failure, hepatorenal syndrome, hospitalized-patients, hypothesis, infections, portal hypertension, spontaneous bacterial peritonitis, systemic inflammation, Acute-on-chronic liver failure, Human serum-albumin

The influence of the properties of different solid substrates on the tethering of two antibodies, IgG1-CR3022 and IgG1-S309, which were specifically engineered for the detection of SARS-CoV-2, has been examined at the molecular level using conventional and accelerated Molecular Dynamics (cMD and aMD, respectively). Two surfaces with very different properties and widely used in immunosensors for diagnosis, amorphous silica and the most stable facet of the face-centered cubic gold structure, have been considered. The effects of such surfaces on the structure and orientation of the immobilized antibodies have been determined by quantifying the tilt and hinge angles that describe the orientation and shape of the antibody, respectively, and the dihedrals that measure the relative position of the antibody arms with respect to the surface. Results show that the interactions with amorphous silica, which are mainly electrostatic due to the charged nature of the surface, help to preserve the orientation and structure of the antibodies, especially of the IgG1-CR3022, indicating that the primary sequence of those antibodies also plays some role. Instead, short-range van der Waals interactions with the inert gold surface cause a higher degree tilting and fraying of the antibodies with respect to amorphous silica. The interactions between the antibodies and the surface also affect the correlation among the different angles and dihedrals, which increases with their strength. Overall, results explain why amorphous silica substrates are frequently used to immobilize antibodies in immunosensors. © 2022 The Authors

JTD Keywords: amorphous silica, antibody immobilization, enzyme, gol d, gold, immobilization, immunosensor, molecu l a r dynamics, molecular dynamics, protein adsorption, sars-cov-2 immunosensor, simulations, spike protein, surface interactions, target, vaccine, Amorphous silica, Antibodies, Antibody engineering, Antibody immobilization, Antibody structure, Article, Chemical detection, Computer model, Controlled study, Dihedral angle, Gold, In-silico, Molecular dynamics, Molecular levels, Molecular-dynamics, Nonhuman, Property, Sars, Sars-cov-2 immunosensor, Severe acute respiratory syndrome coronavirus 2, Silica, Silico studies, Silicon dioxide, Solid substrates, Structure analysis, Substrate chemistry, Substrates, Van der waals forces, Virus detection

Background: Opioid-related deaths are increasing globally. Respiratory complications of opioid use and underlying respiratory disease in people with Opioid Use Disorder (OUD) are potential contributory factors. Individual variation in susceptibility to overdose is, however, incompletely understood. This study investigated the prevalence of respiratory depression (RD) in OUD treatment and compared this to patients with chronic obstructive pulmonary disease (COPD) of equivalent severity. We also explored the contribution of opioid agonist treatment (OAT) dosage, and type, to the prevalence of RD. Methods: There were four groups of participants: 1) OUD plus COPD (‘OUD-COPD’, n = 13); 2) OUD without COPD (‘OUD’, n = 7); 3) opioid-naïve COPD patients (‘COPD'n = 13); 4) healthy controls (‘HC'n = 7). Physiological indices, including pulse oximetry (SpO2%), end-tidal CO2 (ETCO2), transcutaneous CO2 (TcCO2), respiratory airflow and second intercostal space parasternal muscle electromyography (EMGpara), were recorded continuously over 40 min whilst awake at rest. Significant RD was defined as: SpO2%< 90% for > 10 s, ETCO2 per breath > 6.6 kPa, TcCO2 overall mean > 6 kPa, respiratory pauses > 10 s Results: At least one indicator was observed in every participant with OUD (n = 20). This compared to RD episode occurrence in only 2/7 HC and 2/13 COPD participants (p < 0.05,Fisher's exact test). The occurrence of RD was similar in OUD participants prescribed methadone (n = 6) compared to those prescribed buprenorphine (n = 12). Conclusions: Undetected RD is common in OUD cohorts receiving OAT and is significantly more severe than in opioid-naïve controls. RD can be assessed using simple objective measures. Further studies are required to determine the association between RD and overdose risk. © 2022 Elsevier B.V.

JTD Keywords: buprenorphine, comorbidity, deaths, drive, heroin, lung disease, opioid substitution treatment, opioids, overdose, pulse oximetry, respiratory depression, risk, Acute exacerbations, Comorbidity, Lung disease, Opioid substitution treatment, Opioids, Overdose, Respiratory depression

During development, organs reach precise shapes and sizes. Organ morphology is not always obtained through growth; a classic counterexample is the condensation of the nervous system during Drosophila embryogenesis. The mechanics underlying such condensation remain poorly understood. Here, we characterize the condensation of the embryonic ventral nerve cord (VNC) at both subcellular and tissue scales. This analysis reveals that condensation is not a unidirectional continuous process but instead occurs through oscillatory contractions. The VNC mechanical properties spatially and temporally vary, and forces along its longitudinal axis are spatially heterogeneous. We demonstrate that the process of VNC condensation is dependent on the coordinated mechanical activities of neurons and glia. These outcomes are consistent with a viscoelastic model of condensation, which incorporates time delays and effective frictional interactions. In summary, we have defined the progressive mechanics driving VNC condensation, providing insights into how a highly viscous tissue can autonomously change shape and size.

JTD Keywords: actomyosin, central nervous system, drosophila, glia, mechanics, morphogenesis, neuron, ventral nerve cord, Actomyosin, Animals, Central nervous system, Collagen-iv, Contraction, Drosophila, Embryonic development, Forces, Gene, Glia, Glial-cells, Mechanics, Migration, Morphogenesis, Neuroglia, Neuron, Neurons, Quantification, System, Tissue, Ventral nerve cord, Viscolelastic model

The construction of biomembranes that faithfully capture the properties and dynamic functions of cell membranes remains a challenge in the development of synthetic cells and their application. Here a new concept for synthetic cell membranes based on the self-assembly of amphiphilic comb polymers into vesicles, termed ionic combisomes (i-combisomes) is introduced. These combs consist of a polyzwitterionic backbone to which hydrophobic tails are linked by electrostatic interactions. Using a range of microscopies and molecular simulations, the self-assembly of a library of combs in water is screened. It is discovered that the hydrophobic tails form the membrane's core and force the backbone into a rod conformation with nematic-like ordering confined to the interface with water. This particular organization resulted in membranes that combine the stability of classic polymersomes with the biomimetic thickness, flexibility, and lateral mobility of liposomes. Such unparalleled matching of biophysical properties and the ability to locally reconfigure the molecular topology of its constituents enable the harboring of functional components of natural membranes and fusion with living bacteria to “hijack” their periphery. This provides an almost inexhaustible palette to design the chemical and biological makeup of the i-combisomes membrane resulting in a powerful platform for fundamental studies and technological applications.

JTD Keywords: amphiphilic comb polymers, bottom-up synthetic biology, hybrid vesicles, polyelectrolyte-surfactant complexes, polymersomes, synthetic biomembranes, Amphiphilic comb polymers, Biomimetics, Bottom-up synthetic biology, Hybrid vesicles, Hydrophobic and hydrophilic interactions, Liposomes, Polyelectrolyte-surfactant complexes, Polymers, Polymersomes, Synthetic biomembranes, Vesicle fusion, Water

Endothelial coverage of an exposed cardiovascular stent surface leads to the occurrence of restenosis and late-stent thrombosis several months after implantation. To overcome this difficulty, modification of stent surfaces with topographical or biochemical features may be performed to increase endothelial cells’ (ECs) adhesion and/or migration. This work combines both strategies on cobalt-chromium (CoCr) alloy and studies the potential synergistic effect of linear patterned surfaces that are obtained by direct laser interference patterning (DLIP), coupled with the use of Arg-Gly-Asp (RGD) and Tyr-Ile-Gly-Ser-Arg (YIGSR) peptides. An extensive characterization of the modified surfaces was performed by using AFM, XPS, surface charge, electrochemical analysis and fluorescent methods. The biological response was studied in terms of EC adhesion, migration and proliferation assays. CoCr surfaces were successfully patterned with a periodicity of 10 µm and two different depths, D (≈79 and 762 nm). RGD and YIGSR were immobilized on the surfaces by CPTES silanization. Early EC adhesion was increased on the peptide-functionalized surfaces, especially for YIGSR compared to RGD. High-depth patterns generated 80% of ECs’ alignment within the topographical lines and enhanced EC migration. It is noteworthy that the combined use of the two strategies synergistically accelerated the ECs’ migration and proliferation, proving the potential of this strategy to enhance stent endothelialization.

JTD Keywords: adhesion, bare-metal, biofunctionalization, biomaterials, cell adhesive peptides, cobalt-chromium alloy, direct laser interference patterning (dlip), endothelial cell migration, functionalization, matrix, proliferation, selectivity, shear-stress, surfaces, Biofunctionalization, Cell adhesive peptides, Cobalt-chromium alloy, Direct laser interference patterning (dlip), Drug-eluting stents, Endothelial cell migration

The design of catalysts with controlled selectivity at will, also known as catalytic plasticity, is a very attractive approach for the recycling of carbon dioxide (CO2). In this work, we study how catalytically active hydroxyapatite (HAp) and brushite (Bru) interact synergistically, allowing the production of formic acid or acetic acid depending on the HAp/Bru ratio in the catalyst. Raman, wide angle X-ray scattering, X-ray photoelectron spectroscopy, scanning electron microscopy and electrochemical impedance spectroscopy studies, combined with an exhaustive revision of the crystalline structure of the catalyst at the atomic level, allowed to discern how the Bru phase can be generated and stabilized at high temperatures. Results clearly indicate that the presence of OH– groups to maintain the crystalline structural integrity in conjunction with Ca2+ ions less bonded to the lattice fixate carbon into C1, C2 and C3 molecules from CO2 and allow the evolution from formic to acetic acid and acetone. In this way, the plasticity of the HAp-Bru system is demonstrated, representing a promising green alternative to the conventional metal-based electrocatalysts used for CO2 fixation. Thus, the fact that no electric voltage is necessary for the CO2 reduction has a very favorable impact in the final energetic net balance of the carbon fixation reaction. © 2021

JTD Keywords:

ethanol production & nbsp, brushite, co2 reduction, conversion, electrocatalytic reduction, electrode, formate, heterogeneous catalysis & nbsp, hydrogen evolution, insights, monetite, polarized hydroxyapatite,

Many neurodegenerative disorders display protein aggregation as a hallmark, Huntingtin and TDP-43 aggregates being characteristic of Huntington disease and amyotrophic lateral sclerosis, respectively. However, whether these aggregates cause the diseases, are secondary by-products, or even have protective effects, is a matter of debate. Mutations in both human proteins can modulate the structure, number and type of aggregates, as well as their toxicity. To study the role of protein aggregates in cellular fitness, we have expressed in a highly tractable unicellular model different variants of Huntingtin and TDP-43. They each display specific patterns of aggregation and toxicity, even though in both cases proteins have to be very highly expressed to affect cell fitness. The aggregation properties of Huntingtin, but not of TDP-43, are affected by chaperones such as Hsp104 and the Hsp40 couple Mas5, suggesting that the TDP-43, but not Huntingtin, derivatives have intrinsic aggregation propensity. Importantly, expression of the aggregating form of Huntingtin causes a significant extension of fission yeast lifespan, probably as a consequence of kidnapping chaperones required for maintaining stress responses off. Our study demonstrates that in general these prion-like proteins do not cause toxicity under normal conditions, and in fact they can protect cells through indirect mechanisms which up-regulate cellular defense pathways. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.

JTD Keywords: aggregation, antioxidant, degradation, features, fission yeast, gene, huntingtin, neurodegenerative diseases, pap1, polyglutamine toxicity, protein aggregation, proteins, stress, tdp-43, Amyotrophic-lateral-sclerosis, Chaperone, Chemistry, Dna binding protein, Dna-binding proteins, Fission yeast, Genetics, Human, Humans, Huntingtin, Metabolism, Molecular chaperones, Neurodegenerative diseases, Prion, Prions, Protein aggregate, Protein aggregates, Protein aggregation, Schizosaccharomyces, Tdp-43

The severe neurological disorder epilepsy affects almost 1% of the world population. For patients who suffer from pharmacoresistant focal-onset epilepsy, electroencephalographic (EEG) recordings are essential for the localization of the brain area where seizures start. Apart from the visual inspection of the recordings, quantitative EEG signal analysis techniques proved to be useful for this purpose. Among other features, regularity versus irregularity and phase coherence versus phase independence allowed characterizing brain dynamics from the measured EEG signals. Can phase irregularities also characterize brain dynamics? To address this question, we use the univariate coefficient of phase velocity variation, defined as the ratio of phase velocity standard deviation and the mean phase velocity. Beyond that, as a bivariate measure we use the classical mean phase coherence to quantify the degree of phase locking. All phase-based measures are combined with surrogates to test null hypotheses about the dynamics underlying the signals. In the first part of our analysis, we use the Rössler model system to study our approach under controlled conditions. In the second part, we use the Bern-Barcelona EEG database which consists of focal and nonfocal signals extracted from seizure-free recordings. Focal signals are recorded from brain areas where the first seizure EEG signal changes can be detected, and nonfocal signals are recorded from areas that are not involved in the seizure at its onset. Our results show that focal signals have less phase variability and more phase coherence than nonfocal signals. Once combined with surrogates, the mean phase velocity proved to have the highest discriminative power between focal and nonfocal signals. In conclusion, conceptually simple and easy to compute phase-based measures can help to detect features induced by epilepsy from EEG signals. This holds not only for the classical mean phase coherence but even more so for univariate measures of phase irregularity. © 2022 American Physical Society.

JTD Keywords: brain, entropy, epileptogenic networks, functional connectivity, hilbert transform, seizure onset, surrogate data, synchronization, time-series, Biomedical signal processing, Brain areas, Brain dynamics, Dynamics, Electroencephalographic signals, Electroencephalography, Electrophysiology, Intracranial eeg signals, Localisation, Neurological disorders, Neurology, Phase based, Phase coherence, Signal detection, Simple++, Univariate, Velocity, World population

Large doses of movement practice have been shown to restore upper extremities' motor function in a significant subset of individuals post-stroke. However, such large doses are both difficult to implement in the clinic and highly inefficient. In addition, an important reduction in upper extremity function and use is commonly seen following rehabilitation-induced gains, resulting in “rehabilitation in vain”. For those with mild to moderate sensorimotor impairment, the limited spontaneous use of the more affected limb during activities of daily living has been previously proposed to cause a decline of motor function, initiating a vicious cycle of recovery, in which non-use and poor performance reinforce each other. Here, we review computational, experimental, and clinical studies that support the view that if arm use is raised above an effective threshold, one enters a virtuous cycle in which arm use and function can reinforce each other via self-practice in the wild. If not, one enters a vicious cycle of declining arm use and function. In turn, and in line with best practice therapy recommendations, this virtuous/vicious cycle model advocates for a paradigm shift in neurorehabilitation whereby rehabilitation be embedded in activities of daily living such that self-practice with the aid of wearable technology that reminds and motivates can enhance paretic limb use of those who possess adequate residual sensorimotor capacity. Altogether, this model points to a user-centered approach to recovery post-stroke that is tailored to the participant's level of arm use and designed to motivate and engage in self-practice through progressive success in accomplishing meaningful activities in the wild. Copyright © 2022 Ballester, Winstein and Schweighofer.

JTD Keywords: compensatory movement, computational neurorehabilitation, decision-making, individuals, learned non-use, learned nonuse, monkeys, neurorehabilitation, recovery, rehabilitation, stroke, stroke patients, wearable sensors, wrist, Arm movement, Article, Cerebrovascular accident, Clinical decision making, Clinical practice, Clinical study, Compensatory movement, Computational neurorehabilitation, Computer model, Daily life activity, Decision-making, Experimental study, Human, Induced movement therapy, Learned non-use, Musculoskeletal function, Neurorehabilitation, Paresis, Sensorimotor function, Stroke, Stroke rehabilitation, User-centered design, Vicious cycle, Virtuous cycle, Wearable sensors

Enzyme-powered micro- and nanomotors make use of biocatalysis to self-propel in aqueous media and hold immense promise for active and targeted drug delivery. Most (if not all) of these micro- and nanomotors described to date are fabricated using a commercially available enzyme, despite claims that some commercial preparations may not have a sufficiently high degree of purity for downstream applications. In this study, the purity of a commercial urease, an enzyme frequently used to power the motion of micro- and nanomotors, was evaluated and found to be impure. After separating the hexameric urease from the protein impurities by size-exclusion chromatography, the hexameric urease was subsequently characterized and used to functionalize hollow silica microcapsules. Micromotors loaded with purified urease were found to be 2.5 times more motile than the same micromotors loaded with unpurified urease, reaching average speeds of 5.5 ?m/s. After comparing a number of parameters, such as enzyme distribution, protein loading, and motor reusability, between micromotors functionalized with purified vs unpurified urease, it was concluded that protein purification was essential for optimal performance of the enzyme-powered micromotor.

JTD Keywords: canavalin, catalysis, delivery, dls, enhanced diffusion, enzyme, lipase immobilization, micromotors, self-propulsion, super-resolution microscopy, urease, Mesoporous silica nanoparticles, Micromotors, Super-resolution microscopy

Antibody-functionalized nanoparticles (NPs) are commonly used to increase the targeting selectivity toward cells of interest. At a molecular level, the number of functional antibodies on the NP surface and the density of receptors on the target cell determine the targeting interaction. To rationally develop selective NPs, the single-molecule quantitation of both parameters is highly desirable. However, techniques able to count molecules with a nanometric resolution are scarce. Here, we developed a labeling approach to quantify the number of functional cetuximabs conjugated to NPs and the expression of epidermal growth factor receptors (EGFRs) in breast cancer cells using direct stochastic optical reconstruction microscopy (dSTORM). The single-molecule resolution of dSTORM allows quantifying molecules at the nanoscale, giving a detailed insight into the distributions of individual NP ligands and cell receptors. Additionally, we predicted the fraction of accessible antibody-conjugated NPs using a geometrical model, showing that the total number exceeds the accessible number of antibodies. Finally, we correlated the NP functionality, cell receptor density, and NP uptake to identify the highest cell uptake selectivity regimes. We conclude that single-molecule functionality mapping using dSTORM provides a molecular understanding of NP targeting, aiding the rational design of selective nanomedicines.

JTD Keywords: active targeting, active targeting dstorm, antibodies, dstorm, heterogeneity, multivalency, nanomedicine, nanoparticle functionality, size, super-resolution microscopy, surface, Active targeting, Antibodies, Cell membranes, Cell receptors, Cytology, Direct stochastic optical reconstruction microscopy, Dstorm, Heterogeneity, Ligands, Medical nanotechnology, Molecules, Nanomedicine, Nanoparticle functionality, Nanoparticle targeting, Nanoparticles, Optical reconstruction, Single molecule, Stochastic systems, Stochastics, Super-resolution microscopy, Superresolution microscopy

Visual impairments are a critical medical hurdle to be addressed in modern society. Müller glia (MG) have regenerative potential in the retina in lower vertebrates, but not in mammals. However, in mice, in vivo cell fusion between MG and adult stem cells forms hybrids that can partially regenerate ablated neurons.We used organotypic cultures of human retina and preparations of dissociated cells to test the hypothesis that cell fusion between human MG and adult stem cells can induce neuronal regeneration in human systems. Moreover, we established a microinjection system for transplanting human retinal organoids to demonstrate hybrid differentiation.We first found that cell fusion occurs between MG and adult stem cells, in organotypic cultures of human retina as well as in cell cultures. Next, we showed that the resulting hybrids can differentiate and acquire a proto-neural electrophysiology profile when the Wnt/beta-catenin pathway is activated in the adult stem cells prior fusion. Finally, we demonstrated the engraftment and differentiation of these hybrids into human retinal organoids.We show fusion between human MG and adult stem cells, and demonstrate that the resulting hybrid cells can differentiate towards neural fate in human model systems. Our results suggest that cell fusion-mediated therapy is a potential regenerative approach for treating human retinal dystrophies.This work was supported by La Caixa Health (HR17-00231), Velux Stiftung (976a) and the Ministerio de Ciencia e Innovación, (BFU2017-86760-P) (AEI/FEDER, UE), AGAUR (2017 SGR 689, 2017 SGR 926).Published by Elsevier B.V.

JTD Keywords: cell fusion, expression, fusion, ganglion-cells, in-vitro, mouse, müller glia, neural differentiation, organoids, regeneration, retina regeneration, stem cells, stromal cells, transplantation, 4',6 diamidino 2 phenylindole, 5' nucleotidase, Agarose, Alcohol, Arpe-19 cell line, Article, Beta catenin, Beta tubulin, Bone-marrow-cells, Bromophenol blue, Buffer, Calcium cell level, Calcium phosphate, Calretinin, Canonical wnt signaling, Cd34 antigen, Cell culture, Cell fusion, Cell viability, Coculture, Complementary dna, Confocal microscopy, Cornea transplantation, Cryopreservation, Cryoprotection, Crystal structure, Current clamp technique, Dimethyl sulfoxide, Dodecyl sulfate sodium, Edetic acid, Electrophysiology, Endoglin, Fetal bovine serum, Fibroblast growth factor 2, Flow cytometry, Fluorescence activated cell sorting, Fluorescence intensity, Glyceraldehyde 3 phosphate dehydrogenase, Glycerol, Glycine, Hoe 33342, Immunofluorescence, Immunohistochemistry, Incubation time, Interleukin 1beta, Lentivirus vector, Matrigel, Mercaptoethanol, Microinjection, Mueller cell, Müller glia, N methyl dextro aspartic acid, Nerve cell differentiation, Neural differentiation, Nitrogen, Nonhuman, Organoids, Paraffin, Paraffin embedding, Paraformaldehyde, Patch clamp technique, Penicillin derivative, Phenolsulfonphthalein, Phenotype, Phosphate buffered saline, Phosphoprotein phosphatase inhibitor, Polyacrylamide gel electrophoresis, Potassium chloride, Povidone iodine, Promoter region, Proteinase inhibitor, Real time polymerase chain reaction, Receptor type tyrosine protein phosphatase c, Restriction endonuclease, Retina, Retina dystrophy, Retina regeneration, Retinol, Rhodopsin, Rna extraction, Stem cell, Stem cells, Subcutaneous fat, Tunel assay, Visual impairment, Western blotting

Decellularization procedures have been developed and optimized for the entire organ or tissue blocks, by either perfusion of decellularizing agents through the tissue’s vasculature or submerging large sections in decellularizing solutions. However, some research aims require the analysis of native as well as decellularized tissue slices side by side, but an optimal protocol has not yet been established to address this need. Thus, the main goal of this work was to develop a fast and efficient decellularization method for tissue slices—with an emphasis on lung—while attached to a glass slide. To this end, different decellularizing agents were compared for their effectiveness in cellular removal while preserving the extracellular matrix. The intensity of DNA staining was taken as an indicator of remaining cells and compared to untreated sections. The presence of collagen, elastin and laminin were quantified using immunostaining and signal quantification. Scaffolds resulting from the optimized protocol were mechanically characterized using atomic force microscopy. Lung scaffolds were recellularized with mesenchymal stromal cells to assess their biocompatibility. Some decellularization agents (CHAPS, triton, and ammonia hydroxide) did not achieve sufficient cell removal. Sodium dodecyl sulfate (SDS) was effective in cell removal (1% remaining DNA signal), but its sharp reduction of elastin signal (only 6% remained) plus lower attachment ratio (32%) singled out sodium deoxycholate (SD) as the optimal treatment for this application (6.5% remaining DNA signal), due to its higher elastin retention (34%) and higher attachment ratio (60%). Laminin and collagen were fully preserved in all treatments. The SD decellularization protocol was also successful for porcine and murine (mice and rat) lungs as well as for other tissues such as the heart, kidney, and bladder. No significant mechanical differences were found before and after sample decellularization. The resulting acellular lung scaffolds were shown to be biocompatible (98% cell survival after 72 h of culture). This novel method to decellularize tissue slices opens up new methodological possibilities to better understand the role of the extracellular matrix in the context of several diseases as well as tissue engineering research and can be easily adapted for scarce samples like clinical biopsies. Copyright © 2022 Narciso, Ulldemolins, Júnior, Otero, Navajas, Farré, Gavara and Almendros.

JTD Keywords: biocompatibility, bioscaffold recellularization, decellularization, extracellular matrix, flow, impact, lung, scaffolds, tissue slices, Ammonia, Bio-scaffolds, Biocompatibility, Biological organs, Bioscaffold recellularization, Cell removal, Cells, Collagen, Cytology, Decellularization, Dna, Dna signals, Elastin, Extracellular matrices, Extracellular matrix, Extracellular-matrix, Glycoproteins, Laminin, Lung, Mammals, Recellularization, Scaffolds (biology), Sodium deoxycholate, Sulfur compounds, Tissue, Tissue slice, Tissue slices

Remarkable progress in bioengineering over the past two decades has enabled the formulation of fundamental design principles for a variety of medical and non-medical applications. These advancements have laid the foundation for building multicellular engineered living systems (M-CELS) from biological parts, forming functional modules integrated into living machines. These cognizant design principles for living systems encompass novel genetic circuit manipulation, self-assembly, cell–cell/matrix communication, and artificial tissues/organs enabled through systems biology, bioinformatics, computational biology, genetic engineering, and microfluidics. Here, we introduce design principles and a blueprint for forward production of robust and standardized M-CELS, which may undergo variable reiterations through the classic design-build-test-debug cycle. This Review provides practical and theoretical frameworks to forward-design, control, and optimize novel M-CELS. Potential applications include biopharmaceuticals, bioreactor factories, biofuels, environmental bioremediation, cellular computing, biohybrid digital technology, and experimental investigations into mechanisms of multicellular organisms normally hidden inside the “black box” of living cells.

JTD Keywords: cell-fate specification, endothelial-cells, escherichia-coli, extracellular-matrix, gene-expression noise, nuclear hormone-receptors, pluripotent stem-cells, primitive endoderm, transcription factors, Artificial tissues, Assembly cells, Biological parts, Biological systems, Bioremediation, Blood-brain-barrier, Cell engineering, Cell/matrix communication, Design principles, Environmental technology, Functional modules, Fundamental design, Genetic circuits, Genetic engineering, Living machines, Living systems, Medical applications, Molecular biology, Synthetic biology

Of all the various locomotion strategies in low- (Formula presented.), traveling-wave propulsion methods with an elastic tail are preferred because they can be developed using simple designs and fabrication procedures. The only intrinsic property of the elastic tail that governs the form and rate of wave propagation along its length is the bending stiffness. Such traveling wave motion is performed by spermatozoa, which possess a tail that is characterized by intrinsic variable stiffness along its length. In this paper, the passive bending stiffness of the magnetic nanoparticle-coated flagella of bull sperm cells is measured using a contactless electromagnetic-based excitation method. Numerical elasto-hydrodynamic models are first developed to predict the magnetic excitation and relaxation of nanoparticle-coated nonuniform flagella. Then solutions are provided for various groups of nonuniform flagella with disparate nanoparticle coatings that relate their bending stiffness to their decay rate after the magnetic field is removed and the flagellum restores its original configuration. The numerical models are verified experimentally, and capture the effect of the nanoparticle coating on the bending stiffness. It is also shown that electrostatic self-assembly enables arbitrarily magnetizable cellular segments with variable stiffness along the flagellum. The bending stiffness is found to depend on the number and location of the magnetized cellular segments. © 2022 The Authors. Advanced Theory and Simulations published by Wiley-VCH GmbH.

JTD Keywords: cilia, flagella, flagellar propulsion, low reynolds numbers, magnetic, microswimmers, passive, sperm cell, Bending stiffness, Cells, Cellulars, Coatings, Decay (organic), Electric excitation, Excited states, Flagellar propulsion, Locomotion strategies, Low reynolds numbers, Magnetic, Magnetic excitations, Nanoparticle coatings, Passive, Propulsion methods, Self assembly, Simple++, Sperm cell, Sperm cells, Stiffness, Travelling waves, Variable stiffness, Wave propagation, Younǵs modulus

Amorphous molecule-macromolecule mixtures are ubiquitous in polymer technology and are one of the most studied routes for the development of amorphous drug formulations. For these applications it is crucial to understand how the preparation method affects the properties of the mixtures. Here, we employ differential scanning calorimetry and broadband dielectric spectroscopy to investigate dispersions of a small-molecule drug (the Nordazepam anxiolytic) in biodegradable polylactide, both in the form of solvent-cast films and electrospun microfibres. We show that the dispersion of the same small-molecule compound can have opposite (plasticizing or antiplasticizing) effects on the segmental mobility of a biopolymer depending on preparation method, temperature, and polymer enantiomerism. We compare two different chiral forms of the polymer, namely, the enantiomeric pure, semicrystalline L-polymer (PLLA), and a random, fully amorphous copolymer containing both L and D monomers (PDLLA), both of which have lower glass transition temperature (Tg) than the drug. While the drug has a weak antiplasticizing effect on the films, consistent with its higher Tg, we find that it actually acts as a plasticizer for the PLLA microfibres, reducing their Tg by as much as 14 K at 30%-weight drug loading, namely, to a value that is lower than the Tg of fully amorphous films. The structural relaxation time of the samples similarly depends on chemical composition and morphology. Most mixtures displayed a single structural relaxation, as expected for homogeneous samples. In the PLLA microfibres, the presence of crystalline domains increases the structural relaxation time of the amorphous fraction, while the presence of the drug lowers the structural relaxation time of the (partially stretched) chains in the microfibres, increasing chain mobility well above that of the fully amorphous polymer matrix. Even fully amorphous homogeneous mixtures exhibit two distinct Johari–Goldstein relaxation processes, one for each chemical component. Our findings have important implications for the interpretation of the Johari–Goldstein process as well as for the physical stability and mechanical properties of microfibres with small-molecule additives.

JTD Keywords: amorphous pharmaceuticals, beta-relaxation, constant loss, crystallization, dielectric spectroscopy, dynamics, formulation morphology, glass transition, molecular mobility, nanofibers, polylactide, polymer enantiomerism, secondary relaxations, valium metabolite, viscous-liquids, Amorphous pharmaceuticals, Glass-transition, Secondary relaxations

The association between sarcopenia and prognosis in patients with cirrhosis remains to be determined. In this study, we aimed to quantify the association between sarcopenia and the risk of mortality in patients with cirrhosis, by sex, underlying liver disease etiology, and severity of hepatic dysfunction.PubMed, Web of Science, EMBASE, and major scientific conference sessions were searched without language restriction through 13 January 2021 with additional manual search of bibliographies of relevant articles. Cohort studies of ?100 patients with cirrhosis and ?12 months of follow-up that evaluated the association between sarcopenia, muscle mass and the risk of mortality were included.22 studies with 6965 patients with cirrhosis were included. The pooled prevalence of sarcopenia in patients with cirrhosis was 37.5% overall (95% CI 32.4%-42.8%), higher in male patients, patients with alcohol associated liver disease (ALD), patients with CTP grade C, and when sarcopenia was defined in patients by lumbar 3- skeletal muscle index (L3-SMI). Sarcopenia was associated with the increased risk of mortality in patients with cirrhosis (adjusted-hazard ratio [aHR] 2.30, 95% CI 2.01-2.63), with similar findings in sensitivity analysis of cirrhosis patients without HCC (aHR 2.35, 95% CI 1.95-2.83) and in subgroup analysis by sex, liver disease etiology, and severity of hepatic dysfunction. The association between quantitative muscle mass index and mortality further supports the poor prognosis for patients with sarcopenia (aHR 0.95, 95% CI 0.93-0.98). There was no significant heterogeneity in all analyses.Sarcopenia was highly and independently associated with higher risk of mortality in patients with cirrhosis.The prevalence of sarcopenia and its association with death in patients with cirrhosis remain unclear. This meta-analysis indicated that sarcopenia affected about one-third of patients with cirrhosis and up to 50% in patients with ALD or Child's class C cirrhosis. Sarcopenia was independently associated with about 2-fold higher risk of mortality in patients with cirrhosis. The mortality rate increased with greater severity or longer period of having sarcopenia. Increasing awareness about the importance of sarcopenia in patients with cirrhosis among stakeholders must be prioritized.Copyright © 2021. Published by Elsevier B.V.

JTD Keywords: alcohol associated liver disease, alcohol-associated liver disease, cirrhosis, failure, frailty, impact, list, mass, model, mortality, prognosis, prognostic value, sarcopenia, severe muscle depletion, skeletal muscle index, Alcohol-associated liver disease, Cirrhosis, Liver-transplant candidates, Prognosis, Sarcopenia, Skeletal muscle index

The characterization of newly synthesized materials is a cornerstone of all chemistry and nanotechnology laboratories. For this purpose, a wide array of analytical techniques have been standardized and are used routinely by laboratories across the globe. With these methods we can understand the structure, dynamics and function of novel molecular architectures and their relations with the desired performance, guiding the development of the next generation of materials. Moreover, one of the challenges in materials chemistry is the lack of reproducibility due to improper publishing of the sample preparation protocol. In this context, the recent adoption of the reporting standard MIRIBEL (Minimum Information Reporting in Bio–Nano Experimental Literature) for material characterization and details of experimental protocols aims to provide complete, reproducible and reliable sample preparation for the scientific community. Thus, MIRIBEL should be immediately adopted in publications by scientific journals to overcome this challenge. Besides current standard spectroscopy and microscopy techniques, there is a constant development of novel technologies that aim to help chemists unveil the structure of complex materials. Among them super-resolution microscopy (SRM), an optical technique that bypasses the diffraction limit of light, has facilitated the study of synthetic materials with multicolor ability and minimal invasiveness at nanometric resolution. Although still in its infancy, the potential of SRM to unveil the structure, dynamics and function of complex synthetic architectures has been highlighted in pioneering reports during the last few years. Currently, SRM is a sophisticated technique with many challenges in sample preparation, data analysis, environmental control and automation, and moreover the instrumentation is still expensive. Therefore, SRM is currently limited to expert users and is not implemented in characterization routines. This perspective discusses the potential of SRM to transition from a niche technique to a standard routine method for material characterization. We propose a roadmap for the necessary developments required for this purpose based on a collaborative effort from scientists and engineers across disciplines.

JTD Keywords: blinking, fluorophore, intramolecular spirocyclization, localization, nanoparticles, resolution limit, reveals, single-molecule fluorescence, stimulated-emission, Characterization techniques, Diffraction, Distributed computer systems, Environmental management, Information reporting, Material chemistry, Materials characterization, Minimum information, Optical reconstruction microscopy, Optical resolving power, Sample preparation, Structure dynamics, Structure functions, Super-resolution microscopy, Synthesized materials

Charge separation and transport through the reaction center of photosystem I (PSI) is an essential part of the photosynthetic electron transport chain. A strategy is developed to immobilize and orient PSI complexes on gold electrodes allowing to probe the complex's electron acceptor side, the chlorophyll special pair P700. Electrochemical scanning tunneling microscopy (ECSTM) imaging and current-distance spectroscopy of single protein complex shows lateral size in agreement with its known dimensions, and a PSI apparent height that depends on the probe potential revealing a gating effect in protein conductance. In current-distance spectroscopy, it is observed that the distance-decay constant of the current between PSI and the ECSTM probe depends on the sample and probe electrode potentials. The longest charge exchange distance (lowest distance-decay constant ?) is observed at sample potential 0 mV/SSC (SSC: reference electrode silver/silver chloride) and probe potential 400 mV/SSC. These potentials correspond to hole injection into an electronic state that is available in the absence of illumination. It is proposed that a pair of tryptophan residues located at the interface between P700 and the solution and known to support the hydrophobic recognition of the PSI redox partner plastocyanin, may have an additional role as hole exchange mediator in charge transport through PSI.© 2021 Wiley-VCH GmbH.

JTD Keywords: azurin, current distance decay spectroscopy, cytochrome c(6), electrochemical scanning tunneling microscopy (ecstm), electrochemistry, photosystem i, photosystem-i, plastocyanin, protein electron transfer, recognition, single metalloprotein, single molecules, structural basis, tunneling spectroscopy, 'current, Amino acids, Charge transfer, Chlorine compounds, Chlorophyll, Current distance decay spectroscopy, Decay spectroscopies, Distance decay, Electrochemical scanning tunneling microscopy, Electrochemical scanning tunneling microscopy (ecstm), Electrodes, Electron transfer, Electron transport, Electron transport properties, Gold compounds, Kinetics, Oxidation-reduction, Photosynthesis, Photosystem i, Photosystem i protein complex, Photosystems, Protein electron transfer, Protein electron-transfer, Proteins, Scanning tunneling microscopy, Silver halides, Single molecule, Single molecules

The impact of diet and digestive disorders in flatus composition remains largely unexplored. This is partially due to the lack of standardized sampling collection methods, and the easy atmospheric contamination. This paper describes a method to quantitatively determine the major gases in flatus and their application in a nutritional intervention. We describe how to direct sample flatus into Tedlar bags, and simultaneous analysis by gas chromatography–thermal conductivity detection (GC–TCD). Results are analyzed by univariate hypothesis testing and by multilevel principal component analysis. The reported methodology allows simultaneous determination of the five major gases with root mean measurement errors of 0.8% for oxygen (O2), 0.9% for nitrogen (N2), 0.14% for carbon dioxide (CO2), 0.11% for methane (CH4), and 0.26% for hydrogen (H2). The atmospheric contamination was limited to 0.86 (95% CI: [0.7–1.0])% for oxygen and 3.4 (95% CI: [1.4–5.3])% for nitrogen. As an illustration, the method has been successfully applied to measure the response to a nutritional intervention in a reduced crossover study in healthy subjects. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.

JTD Keywords: breath, colonic microbiota, diet effect on flatus, disorders, evacuation, excretion, flatulence, hydrogen gas, major flatus gas components, multilevel principal component analysis, rectal gas collection, systems, volume, Atmospheric contamination, Carbon dioxide, Conductivity detection, Diet effect on flatus, Gas chromatography, Gas collections, Gas component, Gases, Major flatus gas component, Major flatus gas components, Multilevel principal component analyse, Multilevel principal component analysis, Multilevels, Nitrogen, Nutrition, Oxygen, Principal component analysis, Principal-component analysis, Rectal gas collection, Volatile organic-compounds

JTD Keywords: amino-acids, catalysis, dopant-free hydroxyapatite, electrical properties, electrophotosynthesis, nitrogen, thermally-stimulated polarization, Advanced materials, Biocompatibility, Biomedical applications, Brushite, Doped hydroxyapatites, Electric voltage, Electrical characterization, Electrochemical impedance spectroscopy, Equivalent circuits, Future perspectives, Highest temperature, Hydroxyapatite, Interfaces (materials), Material interfaces, Medical applications, Polarization, Polarization conditions, Surface-charges, Technological applications

Underpowered trials risk inaccurate results. Recruitment to stroke rehabilitation randomised controlled trials (RCTs) is often a challenge. Statistical simulations offer an important opportunity to explore the adequacy of sample sizes in the context of specific outcome measures. We aimed to examine and compare the adequacy of stroke rehabilitation RCT sample sizes using the Barthel Index (BI) or modified Rankin Scale (mRS) as primary outcomes.We conducted computer simulations using typical experimental event rates (EER) and control event rates (CER) based on individual participant data (IPD) from stroke rehabilitation RCTs. Event rates are the proportion of participants who experienced clinically relevant improvements in the RCT experimental and control groups. We examined minimum sample size requirements and estimated the number of participants required to achieve a number needed to treat within clinically acceptable boundaries for the BI and mRS.We secured 2350 IPD (18 RCTs). For a 90% chance of statistical accuracy on the BI a rehabilitation RCT would require 273 participants per randomised group. Accurate interpretation of effect sizes would require 1000s of participants per group. Simulations for the mRS were not possible as a clinically relevant improvement was not detected when using this outcome measure.Stroke rehabilitation RCTs with large sample sizes are required for accurate interpretation of effect sizes based on the BI. The mRS lacked sensitivity to detect change and thus may be unsuitable as a primary outcome in stroke rehabilitation trials.Copyright © 2021 Elsevier Inc. All rights reserved.

JTD Keywords:  , barthel index, design, increasing value, modified rankin scale, randomised controlled trials, recruitment, reducing waste, reliability, sample size calculations, simulations, stroke rehabilitation, Adult, Article, Barthel index, Calculation, Computer simulation, Controlled study, Effect size, Female, Human, Human experiment, Major clinical study, Male, Modified rankin scale, Numbers needed to treat, Outcome assessment, Randomised controlled trials, Randomized controlled trial, Randomized controlled-trials, Rankin scale, Recruitment, Rehabilitation, Sample size, Sample size calculations, Simulations, Stroke rehabilitation

Unlike the attachment of soft epithelial skin tissue to penetrating solid natural structures like fingernails and teeth, sealing around percutaneous/permucosal devices such as dental implants is hindered by inflammation and epidermal down growth. Here, we employed a dual keratinocyte-adhesive peptide and anti-inflammatory biomolecule coating on titanium to promote oral epithelial tissue attachment. For minimizing inflammation-triggered epidermal down growth, we coated pristine and oxygen plasma pre-treated polished titanium (pTi) with conjugated linoleic acid (CLA). Further, in order to aid in soft tissue attachment via the formation of hemidesmosomes, adhesive structures by oral keratinocytes, we coated the anionic linoleic acid (LA) adsorbed titanium with cationic cell adhesive peptides (CAP), LamLG3, a peptide derived from Laminin 332, the major extracellular matrix component of the basement membrane in skin tissue and Net1, derived from Netrin-1, a neural chemoattractant capable of epithelial cell attachment via alpha 6 beta 4 integrins. The dual CLA-CAP coatings on pTi were characterized by X-ray photoelectron spectroscopy and dynamic water contact angle measurements. The proliferation of human oral keratinocytes (TERT-2/OKF6) was accelerated on the peptide coated titanium while also promoting the expression of Col XVII and beta-4 integrin, two markers for hemidesmosomes. Simultaneously, CLA coating suppressed the production of inducible nitric oxide synthase (anti-iNOS); a pro-inflammatory M1 marker expressed in lipopolysaccharide (LPS) stimulated murine macrophages (RAW 264.7) and elevated expression of anti-CD206, associated to an anti-inflammatory M2 macrophage phenotype. Taken together, the dual keratinocyte-adhesive peptide and anti-inflammatory biomolecule coating on titanium can help reduce inflammation and promote permucosal/peri-implant soft tissue sealing.

JTD Keywords: Adhesives, Animal, Animals, Anti-inflammatories, Anti-inflammatory agents, Antiinflammatory agent, Biomolecules, Bone, Cell adhesion, Cell-adhesives, Coatings, Conjugated linoleic acid, Conjugated linoleic-acid, Contact angle, Hemidesmosome, Hemidesmosomes, Human, Humans, Hydroxyapatite, Inflammation, Integrins, Keratinocyte, Keratinocytes, Linoleic acid, Macrophages, Mice, Mouse, Nitric oxide, Oral implants, Pathology, Peptides, Skin tissue, Soft tissue, Supplementation, Surface properties, Surface property, Tissue, Titania, Titanium, X ray photoelectron spectroscopy

Quantum dots (QDs) are semiconductor nanoparticles with unique optical and electronic properties, whose interest as potential nano-theranostic platforms for imaging and sensing is increasing. The design and use of QDs requires the understanding of cell-nanoparticle interactions at a microscopic and nanoscale level. Model systems such as supported lipid bilayers (SLBs) are useful, less complex platforms mimicking physico-chemical properties of cell membranes. In this work, we investigated the effect of topographical homogeneity of SLBs bearing different surface charge in the adsorption of hydrophilic QDs. Using quartz-crystal microbalance, a label-free surface sensitive technique, we show significant differences in the interactions of QDs onto homogeneous and inhomogeneous SLBs formed following different strategies. Within short time scales, QDs adsorb onto topographically homogeneous, defect-free SLBs is driven by electrostatic interactions, leading to no layer disruption. After prolonged QD exposure, the nanomechanical stability of the SLB decreases suggesting nanoparticle insertion. In the case of inhomogeneous, defect containing layers, QDs target preferentially membrane defects, driven by a subtle interplay of electrostatic and entropic effects, inducing local vesicle rupture and QD insertion at membrane edges. © 2021

JTD Keywords: adsorption, atomic force microscopy, bilayer formation, gold nanoparticles, hydrophilic quantum dots, lipid membrane defects, model, nanomechanics, quartz crystal microbalance with dissipation, size, supported lipid bilayers, surfaces, Atomic force microscopy, Atomic-force-microscopy, Cell membrane, Cytology, Defect-free, Electronic properties, Electrostatics, Hydrophilic quantum dot, Hydrophilic quantum dots, Hydrophilicity, Hydrophilics, Hydrophobic and hydrophilic interactions, Lipid bilayers, Lipid membrane defect, Lipid membrane defects, Lipid membranes, Lipids, Nanocrystals, Nanomechanics, Optical and electronic properties, Quantum dots, Quartz, Quartz crystal microbalance techniques, Quartz crystal microbalance with dissipation, Quartz crystal microbalances, Quartz-crystal microbalance, Semiconductor nanoparticles, Semiconductor quantum dots, Supported lipid bilayers